[U-Boot] [PATCH v2 2/5] Kconfig: Replace spaces with tabs and missing newline

[Michal Simek]

Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
entry should be separated by newline.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2:
- new patch - not to confuse script

 arch/arm/Kconfig              | 10 +++++-----
 arch/arm/mach-imx/mx6/Kconfig | 14 +++++++-------
 cmd/Kconfig                   |  5 +++--
 3 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 376851ef7aa9..ce619641b753 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -169,7 +169,7 @@ config ARM_ERRATA_833471
 	bool
 
 config ARM_ERRATA_845369
-       bool
+	bool
 
 config ARM_ERRATA_852421
 	bool
@@ -683,7 +683,7 @@ config ARCH_MX31
 	select CPU_ARM1136
 
 config ARCH_MX7ULP
-        bool "NXP MX7ULP"
+	bool "NXP MX7ULP"
 	select CPU_V7A
 	select ROM_UNIFIED_SECTIONS
 	imply MXC_GPIO
@@ -709,7 +709,7 @@ config ARCH_MX6
 
 if ARCH_MX6
 config SPL_LDSCRIPT
-        default "arch/arm/mach-omap2/u-boot-spl.lds"
+	default "arch/arm/mach-omap2/u-boot-spl.lds"
 endif
 
 config ARCH_MX5
@@ -1486,8 +1486,8 @@ source "arch/arm/Kconfig.debug"
 endmenu
 
 config SPL_LDSCRIPT
-        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
-        default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+	default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
+	default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
 	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
 
 
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 521fad74b5a2..b7b77cc51b97 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -293,11 +293,11 @@ config TARGET_MX6SLEVK
 	select SUPPORT_SPL
 
 config TARGET_MX6SLLEVK
-        bool "mx6sll evk"
+	bool "mx6sll evk"
 	select BOARD_LATE_INIT
-        select MX6SLL
-        select DM
-        select DM_THERMAL
+	select MX6SLL
+	select DM
+	select DM_THERMAL
 
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
@@ -309,11 +309,11 @@ config TARGET_MX6SXSABRESD
 	select BOARD_EARLY_INIT_F
 
 config TARGET_MX6SXSABREAUTO
-        bool "mx6sxsabreauto"
+	bool "mx6sxsabreauto"
 	select BOARD_LATE_INIT
 	select MX6SX
-        select DM
-        select DM_THERMAL
+	select DM
+	select DM_THERMAL
 	select BOARD_EARLY_INIT_F
 
 config TARGET_MX6UL_9X9_EVK
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 2fa0829925c1..b359ac7118b0 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1012,11 +1012,12 @@ config CMD_USB_SDP
 	help
 	  Enables the command "sdp" which is used to have U-Boot emulating the
 	  Serial Download Protocol (SDP) via USB.
+
 config CMD_ROCKUSB
 	bool "rockusb"
 	depends on USB_FUNCTION_ROCKUSB
 	help
-          Rockusb protocol is widely used by Rockchip SoC based devices. It can
+	  Rockusb protocol is widely used by Rockchip SoC based devices. It can
 	  read/write info, image to/from devices. This enable rockusb command
 	  support to communication with rockusb device. for more detail about
 	  this command, please read doc/README.rockusb.
@@ -1489,7 +1490,7 @@ config CMD_BLOB
 	  the original data.
 
 	  Sub-commands:
-            blob enc - encapsulating data as a cryptgraphic blob
+	    blob enc - encapsulating data as a cryptgraphic blob
 	    blob dec - decapsulating cryptgraphic blob to get the data
 
 	  Syntax:
-- 
1.9.1