[U-Boot] [PATCH v2 22/26] mmc: Change mode when switching to a boot partition

[Faiz Abbas]

Hi,

On Thursday 21 September 2017 08:00 PM, Jean-Jacques Hiblot wrote:
> Boot partitions do not support HS200. Changing to a lower performance mode
> is required to access them.

I see that the spec says "HS200 and HS400 modes are not supported during
*boot operation*". Can you point out where it says boot partitions are
not accessible in HS200/HS400?

I reverted this patch and was able to access boot0 partition in HS400
mode in U-boot.

Thanks,
Faiz