[U-Boot] [PATCH v1 4/9] ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0

[Lukasz Majewski]

This commit adjusts the autoboot.cmd file to use ${mmcbootdev} instead of
hardcoded value 0.

This is necessary to allow booting this board from the SD card.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

 board/samsung/common/bootscripts/autoboot.cmd | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd
index 1faed8ba0c1a..11c724c4e095 100644
--- a/board/samsung/common/bootscripts/autoboot.cmd
+++ b/board/samsung/common/bootscripts/autoboot.cmd
@@ -74,15 +74,15 @@ setenv boot_img "
 
 #### Routine: autoboot - choose proper boot path
 setenv autoboot "
-if test -e mmc 0:${mmcbootpart} Image.itb; then
+if test -e mmc ${mmcbootdev}:${mmcbootpart} Image.itb; then
 	echo Found kernel image: Image.itb;
 	run setboot_fit;
 	run boot_img;
-elif test -e mmc 0:${mmcbootpart} zImage; then
+elif test -e mmc ${mmcbootdev}:${mmcbootpart} zImage; then
 	echo Found kernel image: zImage;
 	run setboot_zimg;
 	run boot_img;
-elif test -e mmc 0:${mmcbootpart} uImage; then
+elif test -e mmc ${mmcbootdev}:${mmcbootpart} uImage; then
 	echo Found kernel image: uImage;
 	run setboot_uimg;
 	run boot_img;
-- 
2.11.0