[U-Boot] [PATCH] arm: bcm7445: Move config defines to bcm7445.h
Thomas Fitzsimmons
fitzsim at fitzsim.org
Fri Jul 27 03:02:47 UTC 2018
Move some configuration #defines that do not apply to other bcmstb
boards from bcmstb.h to bcm7445.h.
Signed-off-by: Thomas Fitzsimmons <fitzsim at fitzsim.org>
---
include/configs/bcm7445.h | 18 ++++++++++++++++--
include/configs/bcmstb.h | 13 -------------
2 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/include/configs/bcm7445.h b/include/configs/bcm7445.h
index f720035..4601adf 100644
--- a/include/configs/bcm7445.h
+++ b/include/configs/bcm7445.h
@@ -10,10 +10,17 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include "bcmstb.h"
-
#define CONFIG_SYS_NS16550_COM3 0xf040ab00
+#define CONFIG_NR_DRAM_BANKS 3
+
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x80200000
+
+#define CONFIG_SYS_MALLOC_LEN ((10 * 1024) << 10) /* 10 MiB */
+
+#include "bcmstb.h"
+
#define BCMSTB_SDHCI_BASE 0xf03e0200
#define BCMSTB_TIMER_LOW 0xf0412008
#define BCMSTB_TIMER_HIGH 0xf041200c
@@ -23,4 +30,11 @@
#define BCMSTB_HIF_SPI_INTR2 0xf03e1a00
#define BCMSTB_CS_REG 0xf03e0920
+#define CONFIG_ENV_IS_IN_SPI_FLASH 1
+#define CONFIG_DM_SPI 1
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF_TEST
+
#endif /* __CONFIG_H */
diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h
index 262ef54..c74fe40 100644
--- a/include/configs/bcmstb.h
+++ b/include/configs/bcmstb.h
@@ -87,16 +87,11 @@ extern phys_addr_t prior_stage_fdt_address;
* MiB. However, BOLT can be configured to allow loading larger
* initramfs images, in which case this limitation is eliminated.
*/
-#define CONFIG_NR_DRAM_BANKS 3
-
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_TEXT_BASE 0x80100000
-#define CONFIG_SYS_INIT_RAM_ADDR 0x80200000
#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN ((10 * 1024) << 10) /* 10 MiB */
#define CONFIG_SYS_LOAD_ADDR 0x2000000
/*
@@ -141,9 +136,6 @@ extern phys_addr_t prior_stage_fdt_address;
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF_TEST
#define CONFIG_CMD_MMC
/*
@@ -166,7 +158,6 @@ extern phys_addr_t prior_stage_fdt_address;
*/
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
#define CONFIG_ENV_OFFSET 0x1e0000
#define CONFIG_ENV_SIZE (64 << 10) /* 64 KiB */
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
@@ -194,8 +185,4 @@ extern phys_addr_t prior_stage_fdt_address;
*/
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_DM_SPI 1
-
#endif /* __BCMSTB_H */
--
1.8.3.1
More information about the U-Boot
mailing list