[U-Boot] [PATCH] openrd: Once again shrink binary size

[Tom Rini]

With some recent changes to relevant drivers here the openrd board
(openrd_client in this case) does not fit within its size constraint.
We can however drop the slightly extended baudrate table and then the
duplication of mtdparts/mtdids in the default environment.  These
defaults are set in the environment by the 'mtdparts' command and
otherwise referenced throughout the code.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 include/configs/mv-common.h | 8 --------
 include/configs/openrd.h    | 4 +---
 2 files changed, 1 insertion(+), 11 deletions(-)

diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 79d61c599e54..8ae521f7e986 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -38,14 +38,6 @@
 #define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
 #endif
 
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
 /* auto boot */
 #define CONFIG_PREBOOT
 
diff --git a/include/configs/openrd.h b/include/configs/openrd.h
index 2b21003b8b75..17611bc56873 100644
--- a/include/configs/openrd.h
+++ b/include/configs/openrd.h
@@ -60,9 +60,7 @@
 	CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
 	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"	\
 	"x_bootcmd_usb=usb start\0"					\
-	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"		\
-	"mtdids="CONFIG_MTDIDS_DEFAULT"\0"					\
-	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
+	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
 
 /*
  * Ethernet Driver configuration
-- 
2.7.4