[U-Boot] [PATCH][v2] armv8: ls1088a: change dpl load command from apply to lazyapply

[York Sun]

On 06/04/2018 09:36 AM, Jagdish Gediya wrote:
> use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr"
> 
> change dpl load addr to 0x80001000 from 0x80200000 because dpl gets
> corrupted at 0x80200000 during bootm command excecution.
> 
> Signed-off-by: Jagdish Gediya <jagdish.gediya at nxp.com>
> ---
> Changes for v2:
> 	- Change dpl load address from 0x80000000 to 0x80001000 as boot.scr
> 	  is loaded at 0x80000000.

Applied to fsl-qoriq, awaiting upstream.
Thanks.

York