[U-Boot] [PATCH v2 5/6] driver: net: fsl-mc: initialize dpmac irrespective of phy

[Pankaj Bansal]

The dpmac initalization should not depend on phy.
As the phy is not necessary to be present for dpmac to function.
Therefore, remove dpmac initialization dependency from phy.

Signed-off-by: Pankaj Bansal <pankaj.bansal at nxp.com>
---

Notes:
    V2:
    - No Change

 drivers/net/fsl-mc/mc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index 982024e31e..e2341a2e3c 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -327,8 +327,7 @@ static int mc_fixup_mac_addrs(void *blob, enum mc_fixup_type type)
 
 	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
 		/* port not enabled */
-		if ((wriop_is_enabled_dpmac(i) != 1) ||
-		    (wriop_get_phy_address(i) == -1))
+		if (wriop_is_enabled_dpmac(i) != 1)
 			continue;
 
 		sprintf(ethname, "DPMAC%d@%s", i,
@@ -845,8 +844,7 @@ int fsl_mc_ldpaa_init(bd_t *bis)
 	int i;
 
 	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++)
-		if ((wriop_is_enabled_dpmac(i) == 1) &&
-		    (wriop_get_phy_address(i) != -1))
+		if (wriop_is_enabled_dpmac(i) == 1)
 			ldpaa_eth_init(i, wriop_get_enet_if(i));
 	return 0;
 }
-- 
2.17.1