[U-Boot] [PATCH 01/10] configs: Drop imx27lite-common.h
Jagan Teki
jagan at amarulasolutions.com
Mon Jul 30 12:45:00 UTC 2018
This file not used by any config file, hence droped.
Cc: Adam Ford <aford173 at gmail.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
include/configs/imx27lite-common.h | 172 -----------------------------
1 file changed, 172 deletions(-)
delete mode 100644 include/configs/imx27lite-common.h
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
deleted file mode 100644
index f5c5298812..0000000000
--- a/include/configs/imx27lite-common.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Heiko Schocher <hs at denx.de>
- *
- * based on:
- * Copyright (C) 2009 Ilya Yanok <yanok at emcraft.com>
- */
-
-#ifndef __IMX27LITE_COMMON_CONFIG_H
-#define __IMX27LITE_COMMON_CONFIG_H
-
-/*
- * SoC Configuration
- */
-#define CONFIG_MX27
-#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
- (ESDCFG_TRC(10) | \
- ESDCFG_TRCD(3) | \
- ESDCFG_TCAS(cas) | \
- ESDCFG_TRRD(1) | \
- ESDCFG_TRAS(5) | \
- ESDCFG_TWR | \
- ESDCFG_TMRD(2) | \
- ESDCFG_TRP(2) | \
- ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL \
- (ESDCTL_PRCT(0) | \
- ESDCTL_BL | \
- ESDCTL_PWDT(0) | \
- ESDCTL_SREFR(3) | \
- ESDCTL_DSIZ_32 | \
- ESDCTL_COL10 | \
- ESDCTL_ROW13 | \
- ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL 0xf00
-
-#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000
-
-#define MPCTL0_VAL 0x1ef15d5
-
-#define SPCTL0_VAL 0x043a1c09
-
-#define CSCR_VAL 0x33f08107
-
-#define PCDR0_VAL 0x120470c3
-#define PCDR1_VAL 0x03030303
-#define PCCR0_VAL 0xffffffff
-#define PCCR1_VAL 0xfffffffc
-
-#define AIPI1_PSR0_VAL 0x20040304
-#define AIPI1_PSR1_VAL 0xdffbfcfb
-#define AIPI2_PSR0_VAL 0x07ffc200
-#define AIPI2_PSR1_VAL 0xffffffff
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024)
-/* memtest start address */
-#define CONFIG_SYS_MEMTEST_START 0xA0000000
-#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/*
- * Flash & Environment
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-/* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-/* CS2 Base address */
-#define PHYS_FLASH_1 0xc0000000
-/* Flash Base for U-Boot */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \
- CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR 0x1f
-
-/*
- * MTD
- */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
-
-/*
- * NAND
- */
-#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0xd8000000
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs}" \
- " console=ttymxc0,${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addmisc=setenv bootargs ${bootargs}\0" \
- "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
- "kernel_addr_r=a0800000\0" \
- "bootfile=" CONFIG_HOSTNAME "/uImage\0" \
- "rootpath=/opt/eldk-4.2-arm/arm\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
- "run nfsargs addip addtty addmtd addmisc;" \
- "bootm\0" \
- "bootcmd=run net_nfs\0" \
- "load=tftp ${loadaddr} ${u-boot}\0" \
- "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
- " +${filesize};cp.b ${fileaddr} " \
- __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
- "upd=run load update\0" \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
- GENERATED_GBL_DATA_SIZE)
-#endif /* __IMX27LITE_COMMON_CONFIG_H */
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list