[U-Boot] [PATCH 04/10] net: fec: Add default CONFIG_FEC_MXC_PHYADDR for few boards

[Jagan Teki]

Usually PHYADDR is used while PHYLIB is defined, but
boards like apx4devkit, mx6qarm2 are not using PHYLIB
but they are using CONFIG_FEC_MXC_PHYADDR.

So, future patches will convert CONFIG_FEC_MXC_PHYADDR to
generic CONFIG_PHY_ADDR and that will depends on PHYLIB.
Handle this special case for this boards by adding default
CONFIG_FEC_MXC_PHYADDR to 0 if not defined so-that it can't
depends on PHYLIB local to fec_mxc. Boards which are using
PHY_ADDR in future will anyway use PHYLIB.

Cc: Ye Li <ye.li at nxp.com>
Cc: Jason Liu <jason.hui.liu at nxp.com>
Cc: Lauri Hintsala <lauri.hintsala at bluegiga.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 drivers/net/fec_mxc.c        | 4 ++++
 include/configs/apx4devkit.h | 1 -
 include/configs/mx6qarm2.h   | 1 -
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index fc42978a20..49bb926efa 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -50,6 +50,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CONFIG_FEC_XCV_TYPE	PHY_INTERFACE_MODE_MII100
 #endif
 
+#if defined(CONFIG_TARGET_APX4DEVKIT) || defined(CONFIG_TARGET_MX6QARM2)
+# define CONFIG_FEC_MXC_PHY_ADDR	0
+#endif
+
 /*
  * The i.MX28 operates with packets in big endian. We need to swap them before
  * sending and after receiving.
diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index 475f9c372f..aa129edc89 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -52,7 +52,6 @@
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		0
 #define IMX_FEC_BASE			MXS_ENET0_BASE
 #endif
 
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index b82b8325ff..06043c888f 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -22,7 +22,6 @@
 
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define	CONFIG_FEC_XCV_TYPE		PHY_INTERFACE_MODE_RGMII
-#define CONFIG_FEC_MXC_PHYADDR		0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-- 
2.18.0.321.gffc6fa0e3