[U-Boot] [PATCH v4 00/27] SPI-NAND support

[Stefan Roese]

Hi Jagan,

On 31.07.2018 07:36, Jagan Teki wrote:

<snip>

>>>> Acked--by: Jagan Teki <jagan at openedev.com>
>>>>
>>>
>>> Thanks!
>>>
>>>> Can you rebase on master and send the needed patches or whole? Look
>>>> like some changes been added in drivers/mtd/nand/Kconfig
>>>
>>>
>>> I'll wait a bit for Stefan review also and I think I missed something
>>> in mtdparts: old partitions are not freed when creating new ones.
> 
> Is this resolved with v5?
> 
>>
>> I'm back from vacation and am starting to work on this SPI NAND
>> support again. Right now, I'm facing a problem with 32 Bytes
>> missing when written to NAND and read back. Most likely a problem
>> with my SPI driver which supports a maximum of 32 Bytes per SPI
>> message (I'm using adjust_op_size() to adjust the max xfer size).
> 
> Is it with kirkwood?

No. Its with a new platform I'm currently working on (MediaTek
MT7688 MIPS) - custom board. The platform and board port will be
posted in a few days / weeks (once its ready).

>> As for waiting for my review comments, I would suggest to pull
>> this patchset (once updated onto TOT) soon, as the merge window
>> closes just today. We can fix issues later in this release cycle.
>> Otherwise we need to postpone this series to the next release, which
>> is of course also on option.
> 
> If the issue is generic and it changed the current behavior on mtd or
> any other related areas, it's better to hold.

AFAICT its not generic. The SPI NAND seems to be working for Miquel
and its a new infrastructure. So chances for breaking an existing
board / platform are pretty low. By pulling this patchset now, we
enable the possibility for implementing and testing it on other
platforms sooner. Tom also seems to be willing to do so.

Thanks,
Stefan