[U-Boot] [PATCH 1/1] arm: zynq: Fix device tree for Avnet Picozed boards

[Andreas Galauner]

This change adds the necessary /chosen/stdout-path to the device tree
for the Avnet Picozed boards. This node is mandatory for the SPL. Without
it the board resets in a loop without any output. The change also adds
the USB, QSPI and Ethernet MAC nodes of the corresponding devices present
on the board.

Signed-off-by: Andreas Galauner <andreas at galauner.de>
---
 arch/arm/dts/zynq-picozed.dts | 40 +++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/zynq-picozed.dts b/arch/arm/dts/zynq-picozed.dts
index dea6a422c3..db5bb8a6fe 100644
--- a/arch/arm/dts/zynq-picozed.dts
+++ b/arch/arm/dts/zynq-picozed.dts
@@ -14,13 +14,33 @@
 	aliases {
 		serial0 = &uart1;
 		spi0 = &qspi;
-		mmc0 = &sdhci1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
 	};
 
 	memory at 0 {
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&qspi {
+	u-boot,dm-pre-reloc;
+	status = "okay";
 };
 
 &uart1 {
@@ -28,7 +48,17 @@
 	status = "okay";
 };
 
-&qspi {
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
@@ -37,3 +67,9 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
-- 
2.18.0