[U-Boot] [PATCH] arm64: zynqmp: Enable SPD ddr support for zcu102 targets

[Michal Simek]

zcu102 contains DIMM with SPD on it at 0x51 address.
For example:
i2c dev 13
i2c sdram 51

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 +
 configs/xilinx_zynqmp_zcu102_revA_defconfig   | 1 +
 configs/xilinx_zynqmp_zcu102_revB_defconfig   | 1 +
 include/configs/xilinx_zynqmp_zcu102.h        | 3 +++
 4 files changed, 6 insertions(+)

diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
index 9b0f9dfdc076..49a14d87a8e2 100644
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@@ -35,6 +35,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SDRAM=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
index 8def1c5ea921..05dad41acbb8 100644
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
@@ -34,6 +34,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SDRAM=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index 618f1ed36f32..b3711b43e874 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -34,6 +34,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SDRAM=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h
index ca11b97c7c4c..ad6bc3d1bf11 100644
--- a/include/configs/xilinx_zynqmp_zcu102.h
+++ b/include/configs/xilinx_zynqmp_zcu102.h
@@ -39,6 +39,9 @@
 #define CONFIG_ZYNQ_EEPROM_BUS		5
 #define CONFIG_ZYNQ_GEM_EEPROM_ADDR	0x54
 
+#define CONFIG_SPD_EEPROM
+#define CONFIG_DDR_SPD
+
 #include <configs/xilinx_zynqmp.h>
 
 #endif /* __CONFIG_ZYNQMP_ZCU102_H */
-- 
2.17.0