[U-Boot] [PATCH 1/4 v2] armv8: fsl: remove sata support

[andy.tang at nxp.com]

From: Yuantian Tang <andy.tang at nxp.com>

Remove the old implementation in order to enable DM for sata

Signed-off-by: Tang Yuantian <andy.tang at nxp.com>
---
v2:
    - no change

 arch/arm/cpu/armv8/fsl-layerscape/soc.c        |   54 ------------------------
 arch/arm/include/asm/arch-fsl-layerscape/soc.h |   32 --------------
 2 files changed, 0 insertions(+), 86 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index bfd6639..8028d52 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -6,8 +6,6 @@
 #include <common.h>
 #include <fsl_immap.h>
 #include <fsl_ifc.h>
-#include <ahci.h>
-#include <scsi.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
 #include <asm/io.h>
@@ -330,36 +328,6 @@ void fsl_lsch3_early_init_f(void)
 #endif
 }
 
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci;
-
-#ifdef CONFIG_SYS_SATA2
-	ccsr_ahci  = (void *)CONFIG_SYS_SATA2;
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-#endif
-
-#ifdef CONFIG_SYS_SATA1
-	ccsr_ahci  = (void *)CONFIG_SYS_SATA1;
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
-	ahci_init((void __iomem *)CONFIG_SYS_SATA1);
-	scsi_scan(false);
-#endif
-
-	return 0;
-}
-#endif
-
 /* Get VDD in the unit mV from voltage ID */
 int get_core_volt_from_fuse(void)
 {
@@ -400,25 +368,6 @@ int get_core_volt_from_fuse(void)
 }
 
 #elif defined(CONFIG_FSL_LSCH2)
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-
-	/* Disable SATA ECC */
-	out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
-	ahci_init((void __iomem *)CONFIG_SYS_SATA);
-	scsi_scan(false);
-
-	return 0;
-}
-#endif
 
 static void erratum_a009929(void)
 {
@@ -719,9 +668,6 @@ int qspi_ahb_init(void)
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
-#ifdef CONFIG_SCSI_AHCI_PLAT
-	sata_init();
-#endif
 #ifdef CONFIG_CHAIN_OF_TRUST
 	fsl_setenv_chain_of_trust();
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 9a219a6..6e3a420 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -85,39 +85,7 @@ struct cpu_type {
 #define SVR_DEV(svr)		((svr) >> 8)
 #define IS_SVR_DEV(svr, dev)	(((svr) >> 16) == (dev))
 
-/* ahci port register default value */
-#define AHCI_PORT_PHY_1_CFG    0xa003fffe
-#define AHCI_PORT_PHY2_CFG	0x28184d1f
-#define AHCI_PORT_PHY3_CFG	0x0e081509
-#define AHCI_PORT_TRANS_CFG    0x08000029
-#define AHCI_PORT_AXICC_CFG	0x3fffffff
-
 #ifndef __ASSEMBLY__
-/* AHCI (sata) register map */
-struct ccsr_ahci {
-	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
-	u32 pcfg;	/* port config */
-	u32 ppcfg;	/* port phy1 config */
-	u32 pp2c;	/* port phy2 config */
-	u32 pp3c;	/* port phy3 config */
-	u32 pp4c;	/* port phy4 config */
-	u32 pp5c;	/* port phy5 config */
-	u32 axicc;	/* AXI cache control */
-	u32 paxic;	/* port AXI config */
-	u32 axipc;	/* AXI PROT control */
-	u32 ptc;	/* port Trans Config */
-	u32 pts;	/* port Trans Status */
-	u32 plc;	/* port link config */
-	u32 plc1;	/* port link config1 */
-	u32 plc2;	/* port link config2 */
-	u32 pls;	/* port link status */
-	u32 pls1;	/* port link status1 */
-	u32 pcmdc;	/* port CMD config */
-	u32 ppcs;	/* port phy control status */
-	u32 pberr;	/* port 0/1 BIST error */
-	u32 cmds;	/* port 0/1 CMD status error */
-};
-
 #ifdef CONFIG_FSL_LSCH3
 void fsl_lsch3_early_init_f(void);
 int get_core_volt_from_fuse(void);
-- 
1.7.1