[U-Boot] Please pull u-boot-marvell/master

[Stefan Roese]

Hi Tom,

please pull the last batch of Marvell patches for this release
(bug fixes might still be coming).

I've run checkpatch as requested and only noticed warnings that
I feel should be ignored (>80 chars etc).

Thanks,
Stefan


The following changes since commit ee1855dc52fc366f33e21182103323c236cb3346:

  Prepare v2018.07-rc1 (2018-06-04 18:08:45 -0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-marvell.git 

for you to fetch changes up to d4899b0f5ddf39de47bd952ca8484a14f03d00fe:

  ARM: kirkwood: Enforce size limit for guruplug (2018-06-05 07:29:09 +0200)

----------------------------------------------------------------
Chris Packham (5):
      ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
      ARM: add SBx81LIFKW board
      ARM: kirkwood: SBx81LIFKW: Enable network hardware
      ARM: kirkwood: Enforce size limit for sheevaplug
      ARM: kirkwood: Enforce size limit for guruplug

Jon Nettleton (2):
      arm: mvebu: enable sata support for clearfog
      arm: mvebu: switch clearfog to use device-tree i2c and gpio

Michael Walle (2):
      enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board
      arm: kirkwood: lsxl: Add SPI driver model support

Rabeeh Khoury (1):
      mvebu: a38x: Force receiver detected on PCIe lanes

Vagrant Cascadian (1):
      Enable thumb build to reduce build size of u-boot.kwb.

 arch/arm/dts/armada-388-clearfog.dts               |   2 +
 arch/arm/dts/kirkwood-atl-sbx81lifkw.dts           | 133 ++++++++++++++
 arch/arm/dts/kirkwood-lsxl.dtsi                    |   4 +
 arch/arm/mach-kirkwood/Kconfig                     |   4 +
 arch/arm/mach-kirkwood/include/mach/config.h       |   3 +-
 .../mach-mvebu/serdes/a38x/high_speed_env_spec.c   |   2 +
 arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h      |   1 +
 board/alliedtelesis/SBx81LIFKW/Kconfig             |  12 ++
 board/alliedtelesis/SBx81LIFKW/MAINTAINERS         |   7 +
 board/alliedtelesis/SBx81LIFKW/Makefile            |   7 +
 board/alliedtelesis/SBx81LIFKW/kwbimage.cfg        |  47 +++++
 board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c        | 197 +++++++++++++++++++++
 board/solidrun/clearfog/clearfog.c                 |  22 ---
 configs/SBx81LIFKW_defconfig                       |  39 ++++
 configs/clearfog_defconfig                         |   8 +
 configs/lschlv2_defconfig                          |  18 +-
 configs/lsxhl_defconfig                            |   3 +
 configs/sheevaplug_defconfig                       |   1 +
 include/configs/SBx81LIFKW.h                       | 119 +++++++++++++
 include/configs/clearfog.h                         |  16 +-
 include/configs/guruplug.h                         |   5 +
 include/configs/sheevaplug.h                       |   5 +
 22 files changed, 612 insertions(+), 43 deletions(-)
 create mode 100644 arch/arm/dts/kirkwood-atl-sbx81lifkw.dts
 create mode 100644 board/alliedtelesis/SBx81LIFKW/Kconfig
 create mode 100644 board/alliedtelesis/SBx81LIFKW/MAINTAINERS
 create mode 100644 board/alliedtelesis/SBx81LIFKW/Makefile
 create mode 100644 board/alliedtelesis/SBx81LIFKW/kwbimage.cfg
 create mode 100644 board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
 create mode 100644 configs/SBx81LIFKW_defconfig
 create mode 100644 include/configs/SBx81LIFKW.h