[U-Boot] [PATCH] AXS10x: add spi flash support

[Eugeniy Paltsev]

AXS10x boards have n25q512 spi flash IC, so add corresponding
nodes to device tree and enaple corresponding options in
defconfig.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
NOTE: this patch has prerequisite:
http://patchwork.ozlabs.org/patch/926871/

 arch/arc/dts/axs10x_mb.dtsi | 34 ++++++++++++++++++++++++++++++++++
 configs/axs101_defconfig    | 12 ++++++++++++
 configs/axs103_defconfig    | 12 ++++++++++++
 3 files changed, 58 insertions(+)

diff --git a/arch/arc/dts/axs10x_mb.dtsi b/arch/arc/dts/axs10x_mb.dtsi
index 3855a34dc2..56b993fdfc 100644
--- a/arch/arc/dts/axs10x_mb.dtsi
+++ b/arch/arc/dts/axs10x_mb.dtsi
@@ -4,6 +4,10 @@
  */
 
 / {
+	aliases {
+		spi0 = &spi0;
+	};
+
 	axs10x_mb at e0000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -56,5 +60,35 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 		};
+
+		spi0: spi at 0 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			spi-max-frequency = <4000000>;
+			clocks = <&apbclk>;
+			clock-names = "spi_clk";
+			cs-gpio = <&cs_gpio 0>;
+			spi_flash at 0 {
+				compatible = "spi-flash";
+				reg = <0>;
+				spi-max-frequency = <4000000>;
+			};
+		};
+
+		cs_gpio: gpio at 11218 {
+			compatible = "snps,hsdk-creg-gpio";
+			reg = <0x11218 0x4>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-bank-name = "axs-spi-cs";
+			gpio-count = <1>;
+			gpio-first-shift = <0>;
+			gpio-bit-per-line = <2>;
+			gpio-activate-val = <1>;
+			gpio-deactivate-val = <3>;
+			gpio-default-val = <1>;
+		};
 	};
 };
diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig
index 25b10888ce..ae2f92faab 100644
--- a/configs/axs101_defconfig
+++ b/configs/axs101_defconfig
@@ -12,6 +12,8 @@ CONFIG_SYS_PROMPT="AXS# "
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -27,13 +29,23 @@ CONFIG_ENV_FAT_INTERFACE="mmc"
 CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_HSDK_CREG_GPIO=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DESIGNWARE_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig
index b9d387b88a..6b0edd4127 100644
--- a/configs/axs103_defconfig
+++ b/configs/axs103_defconfig
@@ -12,6 +12,8 @@ CONFIG_SYS_PROMPT="AXS# "
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -27,13 +29,23 @@ CONFIG_ENV_FAT_INTERFACE="mmc"
 CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_HSDK_CREG_GPIO=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DESIGNWARE_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_OHCI_HCD=y
-- 
2.14.3