[U-Boot] [PATCH v2 06/13] x86: Add generic EFI payload support

Bin Meng bmeng.cn at gmail.com
Tue Jun 12 15:36:18 UTC 2018


It is possible to create a generic EFI payload for all x86 boards.
The payload is configured to include as many generic drivers as
possible. All stuff that touches low-level initialization are not
allowed as such is the EFI BIOS's responsibility. Platform specific
drivers (like gpio, spi, etc) are not included.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v2:
- update README.u-boot_on_efi to mention generic EFI payload support

 arch/x86/dts/Makefile                 |  1 +
 arch/x86/dts/efi-x86_payload.dts      | 36 +++++++++++++++++++++++++++++++++
 board/efi/Kconfig                     |  9 +++++++++
 board/efi/efi-x86_payload/Kconfig     | 38 +++++++++++++++++++++++++++++++++++
 board/efi/efi-x86_payload/MAINTAINERS |  7 +++++++
 board/efi/efi-x86_payload/Makefile    |  5 +++++
 board/efi/efi-x86_payload/start.S     |  8 ++++++++
 configs/efi-x86_payload32_defconfig   | 35 ++++++++++++++++++++++++++++++++
 configs/efi-x86_payload64_defconfig   | 36 +++++++++++++++++++++++++++++++++
 doc/README.u-boot_on_efi              | 19 +++++++++---------
 include/configs/efi-x86_payload.h     | 32 +++++++++++++++++++++++++++++
 11 files changed, 216 insertions(+), 10 deletions(-)
 create mode 100644 arch/x86/dts/efi-x86_payload.dts
 create mode 100644 board/efi/efi-x86_payload/Kconfig
 create mode 100644 board/efi/efi-x86_payload/MAINTAINERS
 create mode 100644 board/efi/efi-x86_payload/Makefile
 create mode 100644 board/efi/efi-x86_payload/start.S
 create mode 100644 configs/efi-x86_payload32_defconfig
 create mode 100644 configs/efi-x86_payload64_defconfig
 create mode 100644 include/configs/efi-x86_payload.h

diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index 7379774..9872c04 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -11,6 +11,7 @@ dtb-y += bayleybay.dtb \
 	dfi-bt700-q7x-151.dtb \
 	edison.dtb \
 	efi.dtb \
+	efi-x86_payload.dtb \
 	galileo.dtb \
 	minnowmax.dtb \
 	qemu-x86_i440fx.dtb \
diff --git a/arch/x86/dts/efi-x86_payload.dts b/arch/x86/dts/efi-x86_payload.dts
new file mode 100644
index 0000000..137bde5
--- /dev/null
+++ b/arch/x86/dts/efi-x86_payload.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * Generic EFI payload device tree for x86 targets
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+/include/ "keyboard.dtsi"
+/include/ "rtc.dtsi"
+/include/ "tsc_timer.dtsi"
+
+/ {
+	model = "EFI x86 Payload";
+	compatible = "efi,x86-payload";
+
+	aliases {
+		serial0 = &serial;
+	};
+
+	config {
+		silent_console = <0>;
+	};
+
+	chosen {
+		stdout-path = "/serial";
+	};
+
+	pci {
+		compatible = "pci-x86";
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/board/efi/Kconfig b/board/efi/Kconfig
index 6f86a48..d37f6ff 100644
--- a/board/efi/Kconfig
+++ b/board/efi/Kconfig
@@ -12,8 +12,17 @@ config TARGET_EFI
 	  takes over once the RAM, video and CPU are fully running.
 	  U-Boot is loaded as an application from EFI.
 
+config TARGET_EFI_PAYLOAD
+	bool "efi payload"
+	help
+	  This target is used for running U-Boot on top of EFI. In
+	  this case EFI does the early initialisation, and U-Boot
+	  takes over once the RAM, video and CPU are fully running.
+	  U-Boot is loaded as a payload from EFI.
+
 endchoice
 
 source "board/efi/efi-x86/Kconfig"
+source "board/efi/efi-x86_payload/Kconfig"
 
 endif
diff --git a/board/efi/efi-x86_payload/Kconfig b/board/efi/efi-x86_payload/Kconfig
new file mode 100644
index 0000000..dcf4de8
--- /dev/null
+++ b/board/efi/efi-x86_payload/Kconfig
@@ -0,0 +1,38 @@
+if TARGET_EFI_PAYLOAD
+
+config SYS_BOARD
+	default "efi-x86_payload"
+
+config SYS_VENDOR
+	default "efi"
+
+config SYS_SOC
+	default "efi"
+
+config SYS_CONFIG_NAME
+	default "efi-x86_payload"
+
+config SYS_TEXT_BASE
+	default 0x00200000
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	imply SYS_NS16550
+	imply SCSI
+	imply SCSI_AHCI
+	imply AHCI_PCI
+	imply MMC
+	imply MMC_PCI
+	imply MMC_SDHCI
+	imply MMC_SDHCI_SDMA
+	imply USB
+	imply USB_EHCI_HCD
+	imply USB_XHCI_HCD
+	imply USB_STORAGE
+	imply USB_KEYBOARD
+	imply E1000
+	imply ETH_DESIGNWARE
+	imply PCH_GBE
+	imply RTL8169
+
+endif
diff --git a/board/efi/efi-x86_payload/MAINTAINERS b/board/efi/efi-x86_payload/MAINTAINERS
new file mode 100644
index 0000000..abf3a15
--- /dev/null
+++ b/board/efi/efi-x86_payload/MAINTAINERS
@@ -0,0 +1,7 @@
+EFI-X86_PAYLOAD BOARD
+M:	Bin Meng <bmeng.cn at gmail.com>
+S:	Maintained
+F:	board/efi/efi-x86_payload/
+F:	include/configs/efi-x86_payload.h
+F:	configs/efi-x86_payload32_defconfig
+F:	configs/efi-x86_payload64_defconfig
diff --git a/board/efi/efi-x86_payload/Makefile b/board/efi/efi-x86_payload/Makefile
new file mode 100644
index 0000000..6982340
--- /dev/null
+++ b/board/efi/efi-x86_payload/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+
+obj-y	+= start.o
diff --git a/board/efi/efi-x86_payload/start.S b/board/efi/efi-x86_payload/start.S
new file mode 100644
index 0000000..f7eaa7c
--- /dev/null
+++ b/board/efi/efi-x86_payload/start.S
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig
new file mode 100644
index 0000000..7f0cab0
--- /dev/null
+++ b/configs/efi-x86_payload32_defconfig
@@ -0,0 +1,35 @@
+CONFIG_X86=y
+CONFIG_VENDOR_EFI=y
+CONFIG_DEFAULT_DEVICE_TREE="efi-x86_payload"
+CONFIG_TARGET_EFI_PAYLOAD=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_LAST_STAGE_INIT=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_IDE=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+# CONFIG_PCI_PNP is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig
new file mode 100644
index 0000000..8d7f3f0
--- /dev/null
+++ b/configs/efi-x86_payload64_defconfig
@@ -0,0 +1,36 @@
+CONFIG_X86=y
+CONFIG_VENDOR_EFI=y
+CONFIG_DEFAULT_DEVICE_TREE="efi-x86_payload"
+CONFIG_TARGET_EFI_PAYLOAD=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_LAST_STAGE_INIT=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_IDE=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+# CONFIG_PCI_PNP is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_EFI_STUB_64BIT=y
diff --git a/doc/README.u-boot_on_efi b/doc/README.u-boot_on_efi
index 0349c56..8fba112 100644
--- a/doc/README.u-boot_on_efi
+++ b/doc/README.u-boot_on_efi
@@ -71,12 +71,13 @@ Just build U-Boot as normal, e.g.
    make efi-x86_defconfig
    make
 
-To build U-Boot as an EFI payload (32-bit or 64-bit EFI can be used), adjust an
-existing config (like qemu-x86_defconfig) to enable CONFIG_EFI, CONFIG_EFI_STUB
-and either CONFIG_EFI_STUB_32BIT or CONFIG_EFI_STUB_64BIT. All of these are
-boolean Kconfig options. Then build U-Boot as normal, e.g.
+To build U-Boot as an EFI payload (32-bit or 64-bit EFI can be used), enable
+CONFIG_EFI, CONFIG_EFI_STUB, and select either CONFIG_EFI_STUB_32BIT or
+CONFIG_EFI_STUB_64BIT. The efi-x86_payload configs (efi-x86_payload32_defconfig
+and efi-x86_payload32_defconfig) are set up for this. Then build U-Boot as
+normal, e.g.
 
-   make qemu-x86_defconfig
+   make efi-x86_payload32_defconfig (or efi-x86_payload64_defconfig)
    make
 
 You will end up with one of these files depending on what you build for:
@@ -211,11 +212,6 @@ Future work
 -----------
 This work could be extended in a number of ways:
 
-- Add a generic x86 EFI payload configuration. At present you need to modify
-an existing one, but mostly the low-level x86 code is disabled when booting
-on EFI anyway, so a generic 'EFI' board could be created with a suitable set
-of drivers enabled.
-
 - Add ARM support
 
 - Add 64-bit application support
@@ -241,6 +237,9 @@ arch/x86/cpu/efi
 board/efi/efi-x86/efi.c
 	x86 board code for running as an EFI application
 
+board/efi/efi-x86_payload
+	generic x86 EFI payload board support code
+
 common/cmd_efi.c
 	the 'efi' command
 
diff --git a/include/configs/efi-x86_payload.h b/include/configs/efi-x86_payload.h
new file mode 100644
index 0000000..9c62fd2
--- /dev/null
+++ b/include/configs/efi-x86_payload.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
+
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd\0" \
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
+
+/* ATA/IDE support */
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_IDE_MAXDEVICE	4
+#define CONFIG_SYS_ATA_BASE_ADDR	0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
+#define CONFIG_ATAPI
+
+#endif	/* __CONFIG_H */
-- 
2.7.4



More information about the U-Boot mailing list