[U-Boot] [PATCH RESEND 1/2] rockchip: make_fit_atf: use elf entry point

[Kever Yang]

Hi Yousaf,

    You patch looks good, but I don't know why the script always work
for me,

and I don't met the abort, where do you get the BL31?


Thanks,
- Kever
On 06/08/2018 04:47 PM, Mian Yousaf Kaukab wrote:
> make_fit_atf.py uses physical address of first segment as the
> entry point to bl31. It is incorrect and causes following abort
> when bl31_entry() is called:
>
> U-Boot SPL board initTrying to boot from MMC1
> "Synchronous Abort" handler, esr 0x02000000
> elr: 0000000000000000 lr : 00000000ff8c7e8c
> x 0: 00000000ff8e0000 x 1: 0000000000000000
> x 2: 0000000000000000 x 3: 00000000ff8e0180
> x 4: 0000000000000000 x 5: 0000000000000000
> x 6: 0000000000000030 x 7: 00000000ff8e0188
> x 8: 00000000000001e0 x 9: 0000000000000000
> x10: 000000000007fcdc x11: 00000000002881b8
> x12: 00000000000001a2 x13: 0000000000000198
> x14: 000000000007fdcc x15: 00000000002881b8
> x16: 00000000003c0724 x17: 00000000003c0718
> x18: 000000000007fe80 x19: 00000000ff8e0000
> x20: 0000000000200000 x21: 00000000ff8e0000
> x22: 0000000000000000 x23: 000000000007fe30
> x24: 00000000ff8d1c3c x25: 00000000ff8d5000
> x26: 00000000deadbeef x27: 00000000000004a0
> x28: 000000000000009c x29: 000000000007fd90
>
> Fix it by using the entry point from the elf header.
>
> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab at suse.com>
> ---
>  arch/arm/mach-rockchip/make_fit_atf.py | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py
> index 6b3d9201c9..b88a5e1f16 100755
> --- a/arch/arm/mach-rockchip/make_fit_atf.py
> +++ b/arch/arm/mach-rockchip/make_fit_atf.py
> @@ -53,7 +53,7 @@ DT_END="""
>  };
>  """
>  
> -def append_atf_node(file, atf_index, phy_addr):
> +def append_atf_node(file, atf_index, phy_addr, elf_entry):
>      """
>      Append ATF DT node to input FIT dts file.
>      """
> @@ -67,7 +67,7 @@ def append_atf_node(file, atf_index, phy_addr):
>      print >> file, '\t\t\tcompression = "none";'
>      print >> file, '\t\t\tload = <0x%08x>;' % phy_addr
>      if atf_index == 1:
> -        print >> file, '\t\t\tentry = <0x%08x>;' % phy_addr
> +        print >> file, '\t\t\tentry = <0x%08x>;' % elf_entry
>      print >> file, '\t\t};'
>      print >> file, ''
>  
> @@ -141,12 +141,13 @@ def generate_atf_fit_dts(fit_file_name, bl31_file_name, uboot_file_name, dtbs_fi
>  
>      with open(bl31_file_name) as bl31_file:
>          bl31 = ELFFile(bl31_file)
> +        elf_entry = bl31.header['e_entry']
>          for i in range(bl31.num_segments()):
>              seg = bl31.get_segment(i)
>              if ('PT_LOAD' == seg.__getitem__(ELF_SEG_P_TYPE)):
>                  paddr = seg.__getitem__(ELF_SEG_P_PADDR)
>                  p= seg.__getitem__(ELF_SEG_P_PADDR)
> -                append_atf_node(fit_file, i+1, paddr)
> +                append_atf_node(fit_file, i+1, paddr, elf_entry)
>      atf_cnt = i+1
>      append_fdt_node(fit_file, dtbs_file_name)
>      print >> fit_file, '%s' % DT_IMAGES_NODE_END