[U-Boot] [PATCH v3 2/3] efi_loader: ARM: run EFI payloads non-secure

Mark Kettenis kettenis at openbsd.org
Wed Jun 13 22:41:07 UTC 2018


If desired (and possible) switch into HYP mode or non-secure SVC mode
before calling the entry point of an EFI application.  This allows
U-Boot to provide a usable PSCI implementation and makes it possible
to boot kernels into hypervisor mode using an EFI bootloader.

Based on diffs from Heinrich Schuchardt and Alexander Graf.

Signed-off-by: Mark Kettenis <kettenis at openbsd.org>
---
 cmd/bootefi.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index 707d159bac..12a6b84ce6 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -20,6 +20,11 @@
 #include <asm-generic/unaligned.h>
 #include <linux/linkage.h>
 
+#ifdef CONFIG_ARMV7_NONSEC
+#include <asm/armv7.h>
+#include <asm/secure.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define OBJ_LIST_NOT_INITIALIZED 1
@@ -189,6 +194,18 @@ static efi_status_t efi_run_in_el2(EFIAPI efi_status_t (*entry)(
 }
 #endif
 
+#ifdef CONFIG_ARMV7_NONSEC
+static efi_status_t efi_run_in_hyp(EFIAPI efi_status_t (*entry)(
+			efi_handle_t image_handle, struct efi_system_table *st),
+			efi_handle_t image_handle, struct efi_system_table *st)
+{
+	/* Enable caches again */
+	dcache_enable();
+
+	return efi_do_enter(image_handle, st, entry);
+}
+#endif
+
 /* Carve out DT reserved memory ranges */
 static efi_status_t efi_carve_out_dt_rsv(void *fdt)
 {
@@ -338,6 +355,21 @@ static efi_status_t do_bootefi_exec(void *efi,
 	}
 #endif
 
+#ifdef CONFIG_ARMV7_NONSEC
+	if (armv7_boot_nonsec()) {
+		dcache_disable();	/* flush cache before switch to HYP */
+
+		armv7_init_nonsec();
+		secure_ram_addr(_do_nonsec_entry)(efi_run_in_hyp,
+				(uintptr_t)entry,
+				(uintptr_t)loaded_image_info_obj.handle,
+				(uintptr_t)&systab);
+
+		/* Should never reach here, efi exits with longjmp */
+		while (1) { }
+	}
+#endif
+
 	ret = efi_do_enter(loaded_image_info_obj.handle, &systab, entry);
 
 exit:
-- 
2.16.2



More information about the U-Boot mailing list