[U-Boot] [PATCH v6 1/5] reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET

[Ley Foon Tan]

Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET, so can use
CONFIG_IS_ENABLED(DM_RESET) checking in reset.h later.

Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
---
 arch/arm/mach-stm32mp/Kconfig | 2 +-
 common/spl/Kconfig            | 2 +-
 drivers/Makefile              | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index abceede..898ad6b 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -13,7 +13,7 @@ config SPL
 	select SPL_OF_TRANSLATE
 	select SPL_PINCTRL
 	select SPL_REGMAP
-	select SPL_RESET_SUPPORT
+	select SPL_DM_RESET
 	select SPL_SERIAL_SUPPORT
 	select SPL_SYSCON
 	select SPL_DRIVERS_MISC_SUPPORT
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 431710a..bf301a9 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -577,7 +577,7 @@ config SPL_POST_MEM_SUPPORT
 	  performed before booting. This enables the drivers in post/drivers
 	  as part of an SPL build.
 
-config SPL_RESET_SUPPORT
+config SPL_DM_RESET
 	bool "Support reset drivers"
 	depends on SPL
 	help
diff --git a/drivers/Makefile b/drivers/Makefile
index a213ea9..66834c3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
-obj-$(CONFIG_SPL_RESET_SUPPORT) += reset/
+obj-$(CONFIG_SPL_DM_RESET) += reset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
 obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
-- 
2.2.2