[U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY

[Jagan Teki]

On Sat, Jun 16, 2018 at 11:34 PM, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
> On Tue, Jun 5, 2018 at 8:39 PM, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
>> On Tue, Jun 5, 2018 at 12:04 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>>>
>>> Let me look at it and will come back.
>>
>> I fixed it. See "usb: sunxi: sun50i: enable OHCI0 clock when OHCI1 is
>> in use" and "sunxi: clock: Fix EHCI and OHCI clocks on A64" on ML.
>
> I found another issue caused by this series, u-boot crashes while
> shutting down USB if any low-speed or full-speed device is plugged
> (e.g. keyboard):

I've plugged keyboard and mouse on so-pine board, couldn't reproduce the issue.
This is on top of master, where this series got merged, is this issue
reproduces on your recent changes?

U-Boot 2018.07-rc1-00161-g76d69eb01d (Jun 18 2018 - 10:41:20 +0530)
Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: Pine64+
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from FAT... Card did not respond to voltage select!
** Bad device mmc 1 **
Failed (-5)
In:    serial
Out:   serial
Err:   serial
Net:   phy interface7
eth0: ethernet at 1c30000
starting USB...
USB0:   USB EHCI 0.00
USB1:   USB OHCI 0.0
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found