[U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY

[Vasily Khoruzhick]

On Sun, Jun 17, 2018 at 11:04 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> Do git pull and make sure you are at least at
>> a715415bb5948c84cc44c601b193188990f7238b.
>
> Yes, I even tried on this, can't see any issue? Let me know If I still miss any.
>
> U-Boot 2018.07-rc1-00165-ga715415bb5 (Jun 18 2018 - 11:28:28 +0530)
> Allwinner Technology
>
> CPU:   Allwinner A64 (SUN50I)
> Model: BananaPi-M64
> DRAM:  2 GiB
> MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
> Loading Environment from FAT... Unable to use mmc 1:3... Failed (-5)
> In:    serial
> Out:   serial
> Err:   serial
> Allwinner mUSB OTG (Peripheral)
> Net:
> Warning: usb_ether using MAC address from ROM
> eth0: usb_ether
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   USB OHCI 1.0
> USB2:   USB EHCI 1.00
> USB3:   USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 4 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot:  0
> => usb info
> 1: Hub,  USB Revision 2.0
>  - u-boot EHCI Host Controller
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>
> 1: Hub,  USB Revision 2.0
>  - u-boot EHCI Host Controller
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>
> 2: Hub,  USB Revision 2.0
>  -  USB 2.0 Hub
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x1a40  Product 0x0101 Version 1.17
>    Configuration: 1
>    - Interfaces: 1 Self Powered Remote Wakeup 100mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
>
> 3: Human Interface,  USB Revision 1.10
>  -  Dell KB216 Wired Keyboard
>  - Class: (from Interface) Human Interface
>  - PacketSize: 8  Configurations: 1
>  - Vendor: 0x413c  Product 0x2113 Version 1.8
>    Configuration: 1
>    - Interfaces: 2 Bus Powered Remote Wakeup 100mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Human Interface, Subclass: Boot Keyboard
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 24ms
>      Interface: 1
>      - Alternate Setting 0, Endpoints: 1
>      - Class Human Interface, Subclass: None
>      - Endpoint 2 In Interrupt MaxPacket 8 Interval 48ms

Leave this one plugged in.

> 4: Human Interface,  USB Revision 2.0
>  - Logitech USB Receiver
>  - Class: (from Interface) Human Interface
>  - PacketSize: 32  Configurations: 1
>  - Vendor: 0x046d  Product 0xc52b Version 36.1
>    Configuration: 1
>    - Interfaces: 3 Bus Powered Remote Wakeup 98mA
>    - String: "RQR24.01_B0023"
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Human Interface, Subclass: Boot Keyboard
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 8ms
>      Interface: 1
>      - Alternate Setting 0, Endpoints: 1
>      - Class Human Interface, Subclass: Boot Mouse
>      - Endpoint 2 In Interrupt MaxPacket 8 Interval 2ms
>      Interface: 2
>      - Alternate Setting 0, Endpoints: 1
>      - Class Human Interface, Subclass: None
>      - Endpoint 3 In Interrupt MaxPacket 32 Interval 2ms

Unplug this one.

Make sure that you have CONFIG_USB_KEYBOARD in your config and then
run 'usb reset' (or try booting Linux).