[U-Boot] [PATCH v8 08/30] efi: sandbox: Add a simple 'bootefi test' command
Simon Glass
sjg at chromium.org
Mon Jun 18 14:08:13 UTC 2018
This jumps to test code which can call directly into the EFI support. It
does not need a separate image so it is easy to write tests with it.
This test can be executed without causing problems to the run-time
environemnt (e.g. U-Boot does not need to reboot afterwards).
For now the test just outputs a message. To try it:
./sandbox/u-boot -c "bootefi test"
U-Boot 2017.09-00204-g696c9855fe (Sep 17 2017 - 16:43:53 -0600)
DRAM: 128 MiB
MMC:
Using default environment
In: serial
Out: serial
Err: serial
SCSI: Net: No ethernet found.
IDE: Bus 0: not available
Found 0 disks
WARNING: booting without device tree
Hello, world!
Test passed
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v8:
- Expand series substantially to support bootefi selftest
- Rebase to master
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Rebase to master
- Update SPDX tags
Changes in v3:
- Rebase to master
Changes in v2:
- Rebase to master
cmd/bootefi.c | 26 ++++++++++++++++++++------
include/efi_loader.h | 3 +++
lib/efi_loader/Kconfig | 10 ++++++++++
lib/efi_loader/Makefile | 1 +
lib/efi_loader/efi_test.c | 16 ++++++++++++++++
5 files changed, 50 insertions(+), 6 deletions(-)
create mode 100644 lib/efi_loader/efi_test.c
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index 2dfd297e78..7faa3ea245 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -356,7 +356,6 @@ exit:
return ret;
}
-#ifdef CONFIG_CMD_BOOTEFI_SELFTEST
/**
* bootefi_test_prepare() - prepare to run an EFI test
*
@@ -408,7 +407,6 @@ static void bootefi_test_finish(struct efi_loaded_image *image,
free(image->load_options);
list_del(&obj->link);
}
-#endif /* CONFIG_CMD_BOOTEFI_SELFTEST */
static int do_bootefi_bootmgr_exec(void)
{
@@ -440,8 +438,10 @@ static int do_bootefi_bootmgr_exec(void)
/* Interpreter command to boot an arbitrary EFI image from memory */
static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- unsigned long addr;
+ struct efi_loaded_image image;
+ struct efi_object obj;
char *saddr;
+ unsigned long addr;
efi_status_t r;
void *fdt_addr;
@@ -486,11 +486,25 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
memcpy((char *)addr, __efi_helloworld_begin, size);
} else
#endif
+ if (IS_ENABLED(CONFIG_BOOTEFI_TEST) && !strcmp(argv[1], "test")) {
+ int ret;
+
+ if (bootefi_test_prepare(&image, &obj, "\\test",
+ (ulong)&efi_test))
+ return CMD_RET_FAILURE;
+
+ ret = efi_test(&image, &systab);
+ bootefi_test_finish(&image, &obj);
+ if (ret) {
+ printf("Test failed: err=%d\n", ret);
+ return CMD_RET_FAILURE;
+ }
+ printf("Test passed\n");
+
+ return 0;
+ }
#ifdef CONFIG_CMD_BOOTEFI_SELFTEST
if (!strcmp(argv[1], "selftest")) {
- struct efi_loaded_image image;
- struct efi_object obj;
-
if (bootefi_test_prepare(&image, &obj, "\\selftest",
(uintptr_t)&efi_selftest))
return CMD_RET_FAILURE;
diff --git a/include/efi_loader.h b/include/efi_loader.h
index c66252a7dd..0615cfac85 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -442,6 +442,9 @@ efi_status_t EFIAPI efi_set_variable(u16 *variable_name, efi_guid_t *vendor,
void *efi_bootmgr_load(struct efi_device_path **device_path,
struct efi_device_path **file_path);
+/* Perform EFI tests */
+int efi_test(efi_handle_t image_handle, struct efi_system_table *systab);
+
#else /* defined(EFI_LOADER) && !defined(CONFIG_SPL_BUILD) */
/* Without CONFIG_EFI_LOADER we don't have a runtime section, stub it out */
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index d471e6f4a4..110dcb23c9 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -25,3 +25,13 @@ config EFI_LOADER_BOUNCE_BUFFER
Some hardware does not support DMA to full 64bit addresses. For this
hardware we can create a bounce buffer so that payloads don't have to
worry about platform details.
+
+config BOOTEFI_TEST
+ bool "Provide a test for the EFI loader"
+ depends on EFI_LOADER && SANDBOX
+ default y
+ help
+ Provides a test of the EFI loader functionality accessed via the
+ command line ('bootefi test'). This runs within U-Boot so does not
+ need a separate EFI application to work. It aims to include coverage
+ of all EFI code which can be accessed within sandbox.
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index c6046e36d2..2da28f9c90 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_DM_VIDEO) += efi_gop.o
obj-$(CONFIG_PARTITIONS) += efi_disk.o
obj-$(CONFIG_NET) += efi_net.o
obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += efi_smbios.o
+obj-$(CONFIG_BOOTEFI_TEST) += efi_test.o
diff --git a/lib/efi_loader/efi_test.c b/lib/efi_loader/efi_test.c
new file mode 100644
index 0000000000..4b8d49f324
--- /dev/null
+++ b/lib/efi_loader/efi_test.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017, Google Inc.
+ */
+
+#include <common.h>
+#include <efi_api.h>
+
+int efi_test(efi_handle_t image_handle, struct efi_system_table *systable)
+{
+ struct efi_simple_text_output_protocol *con_out = systable->con_out;
+
+ con_out->output_string(con_out, L"Hello, world!\n");
+
+ return 0;
+}
--
2.18.0.rc1.244.gcf134e6275-goog
More information about the U-Boot
mailing list