[U-Boot] [PATCH v6 0/7] sunxi: sync H3, H5, A64 DTs from mainline Linux

[Andre Przywara]

Hi,

On 19/06/18 07:40, Jagan Teki wrote:
> On Wed, May 16, 2018 at 1:30 PM, Andre Przywara <andre.przywara at arm.com> wrote:
>> This is an updated version of the series which brings the exact mainline
>> Linux device tree files for various Allwinner boards into U-Boot.
>> Apart from using the usually more correct reference DT files, this offers
>> the big benefit of being able to use U-Boot's DT copy for directly passing
>> it to the kernel. This avoids to actually load a .dtb file from somewhere,
>> and allows seamless and automatic UEFI booting, so distribution installer
>> images should just work (TM).
>>
>> This cover the ARMv8 SoCs (H5, A64), but also all boards with the H3, as
>> this is somewhat married to the H5 and can only be updated together.
>> The H3 and H5 DT files have diverged quite a bit, but as U-Boot's own
>> usage of the DT is (yet) quite limited, there should be no regressions.
>> The patches are split to first update the SoC .dtsi file, then the board
>> .dts files in a second patch. They are grouped to handle the A64 first,
>> then the H5 and H3. I put the respective kernel commit IDs in the commit
>> messages.
>> Patch 6 brings in the mainline DT for the SoPine baseboard, for which we
>> didn't have a separate .dts in U-Boot so far.
>> Patch 7 adds a separate .dts file for the Pine64-LTS board, which is
>> virtually identical to the SoPine baseboard, but, due to the SoC being
>> named differently, deserves a separate file.
>>
>> This is based on origin/master (ca70cbabdcd1).
>>
>> Maxime, I kept you Acked-by: from the previous posts, as I literally
>> just updated to the latest Linux master, which went through your review
>> anyway. Hope that's OK for you.
>>
>> Cheers,
>> Andre.
>>
>> Changelog v5 .. v6:
>> - bring back DT update patches
>> - update to Linux v4.17-rc5
>>
>> Changelog v4 .. v5:
>> - drop Linux DT update patches for now
>> - fix minor checkpatch complaints
>>
>> Changelog v3 .. v4:
>> - remove MMC environment for all Allwinner boards (including 32 bit ones)
>> - keep MMC environment offset to the old values
>> - drop DT adjustments to use fixed MMC regulator
>>
>> Changelog v2 .. v3:
>> 01: added, was on the list before
>> 02: drop redundant H5 line
>> 03-08: unchanged
>> 09-20: added
>>
>> Changelog v1 .. v2:
>> 01, 02, 03: unchanged
>> 04, 05, 06, 07: added
>>
>> Andre Przywara (7):
>>   sunxi: DT: A64: update device tree file for Allwinner A64 SoC
>>   sunxi: DT: A64: update board .dts files from Linux
>>   sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs
>>   sunxi: DT: H5: update board .dts files from Linux
>>   sunxi: DT: H3: update board .dts files from Linux
>>   sunxi: DT: A64: add proper SoPine baseboard device tree
> 
> Reviewed-by: Jagan Teki <jagan at openedev.com>

Thanks!

> Please rebase on master and send, files from A64, H5 and H3 has changed a bit.

Yes, I rebased already on Sunday against 4.18-rc1. There is an issue
with the recent sunxi USB changes in U-Boot, as these patches here now
enable all USB controllers, which U-Boot apparently doesn't like. Will
debug this and then send ASAP.

Cheers,
Andre.