[U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Paul Kocialkowski
contact at paulk.fr
Wed Jun 20 08:57:55 UTC 2018
Hi there,
On Wed, 2018-01-10 at 13:20 +0800, Peng Fan wrote:
> Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
> firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
> DRAM.
First off, I'd like to express my gratitude for this port: the i.MX8
looks like a great platform and it's really nice to see support for it
land in U-Boot!
Regarding the integration of i.MX8 with upstream software in general:
are there plans to upstream the ARM Trusted Firmware port for i.MX8?
It would be great to have both U-Boot and ATF upstream support to
achieve a boot chain with (mostly-)free and upstream software.
On that note, are there proprietary components involved in the boot
process, other than the already-identified DDR training firmware for the
DDR PHY?
About that DDR PHY firmware: to what extent is it necessary? It is
common that DDR link training is required for socketed DRAM chips, but
properly-tuned static per-board configuration is usually enough for
soldered DRAM chips. Is the i.MX8 and exception to that? If not, would
it be possible to provide such a static configuration mode, that does
not involved any firmware for link training?
Perhaps the PHY link training code (with the firmware) could be kept
around as a fallback, disabled by default. Also, I see lots of
undocumented registers in the process. Does it seem feasable to document
these? This currently does not really like the source form of the
software.
Having a firmware in the boot process is a fatal flaw when it comes to
software freedom, as it prevents having a fully free boot chain. Since
some projects (e.g. the Purism Librem 5) are aiming at using the i.MX8
for this precise reason, this is a serious (if not fatal) drawback.
Moreover, it is really not convenient to have a non-free firmware that
must be carried around with U-Boot and prevents user from just cloning
u-boot, building and running (by adding an extra step that complicates
the process and makes it different from other platforms that do not
require such a blob).
Thanks in advance for your time and consideration of these questions!
Cheers,
Paul
> The boot log with Arm trusted firmware console enabled:
> "
> U-Boot SPL 2018.01-00038-gbd426c08ea (Jan 10 2018 - 13:14:56)
> PMIC: PFUZE100 ID=0x10
> Normal Boot
> Trying to boot from MMC2
> NOTICE: Configureing TZASC380
> NOTICE: BL31: v1.4(release):o8.0.0_1.3.0_8m-prc-20171211-6-g54fb0797-dirty
> NOTICE: BL31: Built : 07:17:16, Jan 8 2018
> NOTICE: sip svc init
>
> U-Boot 2018.01-00038-gbd426c08ea (Jan 10 2018 - 13:14:56 +0800)
>
> CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
> Reset cause: POR
> Model: Freescale i.MX8MQ EVK
> DRAM: 3 GiB
> MMC: FSL_SDHC: 0, FSL_SDHC: 1
> Using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> Hit any key to stop autoboot: 0
> u-boot=>
> "
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/fsl-imx8mq-evk.dts | 424 +++++++++
> arch/arm/include/asm/arch-mx8m/ddr.h | 9 +
> arch/arm/mach-imx/mx8m/Kconfig | 12 +
> board/freescale/mx8mq_evk/Kconfig | 12 +
> board/freescale/mx8mq_evk/Makefile | 12 +
> board/freescale/mx8mq_evk/README | 47 +
> board/freescale/mx8mq_evk/ddr/ddr_init.c | 246 +++++
> board/freescale/mx8mq_evk/ddr/ddrphy_train.c | 1272 ++++++++++++++++++++++++++
> board/freescale/mx8mq_evk/ddr/helper.c | 101 ++
> board/freescale/mx8mq_evk/mx8mq_evk.c | 156 ++++
> board/freescale/mx8mq_evk/spl.c | 230 +++++
> configs/mx8mq_evk_defconfig | 27 +
> include/configs/mx8mq_evk.h | 269 ++++++
> 14 files changed, 2819 insertions(+)
> create mode 100644 arch/arm/dts/fsl-imx8mq-evk.dts
> create mode 100644 board/freescale/mx8mq_evk/Kconfig
> create mode 100644 board/freescale/mx8mq_evk/Makefile
> create mode 100644 board/freescale/mx8mq_evk/README
> create mode 100644 board/freescale/mx8mq_evk/ddr/ddr_init.c
> create mode 100644 board/freescale/mx8mq_evk/ddr/ddrphy_train.c
> create mode 100644 board/freescale/mx8mq_evk/ddr/helper.c
> create mode 100644 board/freescale/mx8mq_evk/mx8mq_evk.c
> create mode 100644 board/freescale/mx8mq_evk/spl.c
> create mode 100644 configs/mx8mq_evk_defconfig
> create mode 100644 include/configs/mx8mq_evk.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index a895c70284..299107977f 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -391,6 +391,8 @@ dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
>
> dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
>
> +dtb-$(CONFIG_ARCH_MX8M) += fsl-imx8mq-evk.dtb
> +
> dtb-$(CONFIG_RCAR_GEN3) += \
> r8a7795-h3ulcb.dtb \
> r8a7795-salvator-x.dtb \
> diff --git a/arch/arm/dts/fsl-imx8mq-evk.dts b/arch/arm/dts/fsl-imx8mq-evk.dts
> new file mode 100644
> index 0000000000..f0aa3485e6
> --- /dev/null
> +++ b/arch/arm/dts/fsl-imx8mq-evk.dts
> @@ -0,0 +1,424 @@
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017 NXP
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +
> +/* First 128KB is for PSCI ATF. */
> +/memreserve/ 0x40000000 0x00020000;
> +
> +#include "fsl-imx8mq.dtsi"
> +
> +/ {
> + model = "Freescale i.MX8MQ EVK";
> + compatible = "fsl,imx8mq-evk", "fsl,imx8mq";
> +
> + chosen {
> + bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200";
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_usdhc2_vmmc: usdhc2_vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> + };
> +
> + pwmleds {
> + compatible = "pwm-leds";
> +
> + ledpwm2 {
> + label = "PWM2";
> + pwms = <&pwm2 0 50000>;
> + max-brightness = <255>;
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + imx8mq-evk {
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x16
> + >;
> + };
> +
> + pinctrl_qspi: qspigrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> +
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2grpgpio {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
> + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_sai2: sai2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
> + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
> + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> + >;
> + };
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + at803x,led-act-blind-workaround;
> + at803x,eee-disabled;
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic: pfuze100 at 08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-always-on;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-always-on;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3ab {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "disabled";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm2>;
> + status = "okay";
> +};
> +
> +&lcdif {
> + status = "okay";
> + disp-dev = "mipi_dsi_northwest";
> + display = <&display0>;
> +
> + display0: display at 0 {
> + bits-per-pixel = <24>;
> + bus-width = <24>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> + timing0: timing0 {
> + clock-frequency = <9200000>;
> + hactive = <480>;
> + vactive = <272>;
> + hfront-porch = <8>;
> + hback-porch = <4>;
> + hsync-len = <41>;
> + vback-porch = <2>;
> + vfront-porch = <4>;
> + vsync-len = <10>;
> +
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&qspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash0: n25q256a at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "micron,n25q256a";
> + spi-max-frequency = <29000000>;
> + spi-nor,ddr-quad-read-dummy = <6>;
> + };
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + bus-width = <4>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> diff --git a/arch/arm/include/asm/arch-mx8m/ddr.h b/arch/arm/include/asm/arch-mx8m/ddr.h
> index b37382eab0..11016c9278 100644
> --- a/arch/arm/include/asm/arch-mx8m/ddr.h
> +++ b/arch/arm/include/asm/arch-mx8m/ddr.h
> @@ -353,4 +353,13 @@ enum msg_response {
> TRAIN_FAIL = 0xff,
> };
>
> +enum fw_type {
> + FW_1D_IMAGE,
> + FW_2D_IMAGE,
> +};
> +
> +void ddr_init(void);
> +void ddr_load_train_code(enum fw_type type);
> +void lpddr4_800M_cfg_phy(void);
> +void dram_pll_init(void);
> #endif
> diff --git a/arch/arm/mach-imx/mx8m/Kconfig b/arch/arm/mach-imx/mx8m/Kconfig
> index 3a84c2f2b0..e3b57b7915 100644
> --- a/arch/arm/mach-imx/mx8m/Kconfig
> +++ b/arch/arm/mach-imx/mx8m/Kconfig
> @@ -7,4 +7,16 @@ config MX8M
> config SYS_SOC
> default "mx8m"
>
> +choice
> + prompt "NXP i.MX8M board select"
> + optional
> +
> +config TARGET_MX8MQ_EVK
> + bool "mx8mq_evk"
> + select MX8M
> +
> +endchoice
> +
> +source "board/freescale/mx8mq_evk/Kconfig"
> +
> endif
> diff --git a/board/freescale/mx8mq_evk/Kconfig b/board/freescale/mx8mq_evk/Kconfig
> new file mode 100644
> index 0000000000..4e23002803
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_MX8MQ_EVK
> +
> +config SYS_BOARD
> + default "mx8mq_evk"
> +
> +config SYS_VENDOR
> + default "freescale"
> +
> +config SYS_CONFIG_NAME
> + default "mx8mq_evk"
> +
> +endif
> diff --git a/board/freescale/mx8mq_evk/Makefile b/board/freescale/mx8mq_evk/Makefile
> new file mode 100644
> index 0000000000..286396ee96
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/Makefile
> @@ -0,0 +1,12 @@
> +#
> +# Copyright 2017 NXP
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += mx8mq_evk.o
> +
> +ifdef CONFIG_SPL_BUILD
> +obj-y += spl.o
> +obj-y += ddr/ddr_init.o ddr/ddrphy_train.o ddr/helper.o
> +endif
> diff --git a/board/freescale/mx8mq_evk/README b/board/freescale/mx8mq_evk/README
> new file mode 100644
> index 0000000000..e214401a8a
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/README
> @@ -0,0 +1,47 @@
> +U-Boot for the NXP i.MX8MQ EVK board
> +
> +Quick Start
> +====================
> +- Build the ARM Trusted firmware binary
> +- Build U-Boot
> +- Get ddr fimware and tools
> +- Generate flash.bin using imx-mkimage
> +- Boot
> +
> +Get and Build the ARM Trusted firmware
> +====================
> +Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
> +$ make PLAT=imx8mq bl31
> +
> +Build U-Boot
> +====================
> +$ export ARCH=arm64
> +$ export CROSS_COMPILE=aarch64-poky-linux-
> +$ make mx8mq_evk_defconfig
> +$ make
> +
> +Get the ddr firmware and tools
> +====================
> +Note: Better to use NXP released yocto to get the firmware in case
> + there is new releases.
> +https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin
> +imx-mkimage: https://source.codeaurora.org/external/imx/imx-mkimage/
> +
> +Generate flash.bin using imx-mkimage
> +====================
> +Copy bl31.bin u-boot-nodtb.bin u-boot-spl.bin fsl-imx8mq-evk.dtb to
> + imx-mkimage/iMX8M
> +Copy lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_imem.bin
> + lpddr4_pmu_train_2d_dmem.bin lpddr4_pmu_train_2d_imem.bin to
> + imx-mkimage/iMX8M
> +If you want to run with HDMI, copy signed_hdmi_imx8m.bin to imx-mkimage/iMX8M
> +
> +make SOC=iMX8M flash_hdmi_spl_uboot or make SOC=iMX8M flash_spl_uboot to
> +generate flash.bin.
> +
> +Burn the flash.bin to MicroSD card offset 33KB
> +$sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33
> +
> +Boot
> +====================
> +Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
> diff --git a/board/freescale/mx8mq_evk/ddr/ddr_init.c b/board/freescale/mx8mq_evk/ddr/ddr_init.c
> new file mode 100644
> index 0000000000..9ff4341bd9
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/ddr/ddr_init.c
> @@ -0,0 +1,246 @@
> +/*
> + * Copyright 2017 NXP
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/ddr.h>
> +#include <asm/arch/sys_proto.h>
> +#include <linux/iopoll.h>
> +
> +struct imx8m_ddrc_regs *ddrc_regs = (struct imx8m_ddrc_regs *)DDRC_IPS_BASE_ADDR(0);
> +static struct gpc_reg *gpc_reg = (struct gpc_reg *)GPC_BASE_ADDR;
> +static struct src *src = (struct src *)SRC_BASE_ADDR;
> +
> +void lpddr4_800mhz_cfg_umctl2(void)
> +{
> + writel(0x00000001, &ddrc_regs->dbg1);
> + writel(0x00000001, &ddrc_regs->pwrctl);
> + writel(0x83080020, &ddrc_regs->mstr);
> + writel(0x006180e0, &ddrc_regs->rfshtmg);
> + writel(0xc003061b, &ddrc_regs->init0);
> + writel(0x009d0000, &ddrc_regs->init1);
> + writel(0x0000fe05, &ddrc_regs->init2);
> + writel(0x00d4002d, &ddrc_regs->init3);
> + writel(0x00310008, &ddrc_regs->init4);
> + writel(0x00040009, &ddrc_regs->init5);
> + writel(0x0046004d, &ddrc_regs->init6);
> + writel(0x0005004d, &ddrc_regs->init7);
> + writel(0x00000979, &ddrc_regs->rankctl);
> + writel(0x1a203522, &ddrc_regs->dramtmg0);
> + writel(0x00060630, &ddrc_regs->dramtmg1);
> + writel(0x070e1214, &ddrc_regs->dramtmg2);
> + writel(0x00b0c006, &ddrc_regs->dramtmg3);
> + writel(0x0f04080f, &ddrc_regs->dramtmg4);
> + writel(0x0d0d0c0c, &ddrc_regs->dramtmg5);
> + writel(0x01010007, &ddrc_regs->dramtmg6);
> + writel(0x0000060a, &ddrc_regs->dramtmg7);
> + writel(0x01010101, &ddrc_regs->dramtmg8);
> + writel(0x40000008, &ddrc_regs->dramtmg9);
> + writel(0x00050d01, &ddrc_regs->dramtmg10);
> + writel(0x01010008, &ddrc_regs->dramtmg11);
> + writel(0x00020000, &ddrc_regs->dramtmg12);
> + writel(0x18100002, &ddrc_regs->dramtmg13);
> + writel(0x00000dc2, &ddrc_regs->dramtmg14);
> + writel(0x80000000, &ddrc_regs->dramtmg15);
> + writel(0x00a00050, &ddrc_regs->dramtmg17);
> + writel(0x53200018, &ddrc_regs->zqctl0);
> + writel(0x02800070, &ddrc_regs->zqctl1);
> + writel(0x00000000, &ddrc_regs->zqctl2);
> + writel(0x0397820a, &ddrc_regs->dfitmg0);
> + writel(0x0397820a, &ddrc_regs->freq1.dfitmg0);
> + writel(0x0397820a, &ddrc_regs->freq2.dfitmg0);
> + writel(0x00020103, &ddrc_regs->dfitmg1);
> + writel(0xe0400018, &ddrc_regs->dfiupd0);
> + writel(0x00df00e4, &ddrc_regs->dfiupd1);
> + writel(0x00000000, &ddrc_regs->dfiupd2);
> + writel(0x00000011, &ddrc_regs->dfimisc);
> + writel(0x0000170a, &ddrc_regs->dfitmg2);
> + writel(0x00000001, &ddrc_regs->dbictl);
> + writel(0x00000000, &ddrc_regs->dfiphymstr);
> + /* Address map is from MSB 29: r15, r14, cs, r13-r0, b2-b0, c9-c0 */
> + writel(0x00000015, &ddrc_regs->addrmap0);
> + writel(0x00001f1f, &ddrc_regs->addrmap4);
> + /* bank interleave */
> + writel(0x00080808, &ddrc_regs->addrmap1);
> + writel(0x07070707, &ddrc_regs->addrmap5);
> + writel(0x08080707, &ddrc_regs->addrmap6);
> + writel(0x020f0c54, &ddrc_regs->odtcfg);
> + writel(0x00000000, &ddrc_regs->odtmap);
> + writel(0x00000001, &ddrc_regs->pcfg[0].pctrl);
> +
> + /* performance setting */
> + writel(0x0b060908, &ddrc_regs->odtcfg);
> + writel(0x00000000, &ddrc_regs->odtmap);
> + writel(0x29511505, &ddrc_regs->sched);
> + writel(0x0000002c, &ddrc_regs->sched1);
> + writel(0x5900575b, &ddrc_regs->perfhpr1);
> + writel(0x900093e7, &ddrc_regs->perflpr1);
> + writel(0x02005574, &ddrc_regs->perfwr1);
> + writel(0x00000016, &ddrc_regs->dbg0);
> + writel(0x00000000, &ddrc_regs->dbg1);
> + writel(0x00000000, &ddrc_regs->dbgcmd);
> + writel(0x00000001, &ddrc_regs->swctl);
> + writel(0x00000011, &ddrc_regs->poisoncfg);
> + writel(0x00000111, &ddrc_regs->pccfg);
> + writel(0x000010f3, &ddrc_regs->pcfg[0].pcfgr);
> + writel(0x000072ff, &ddrc_regs->pcfg[0].pcfgw);
> + writel(0x00000001, &ddrc_regs->pcfg[0].pctrl);
> + writel(0x01110d00, &ddrc_regs->pcfg[0].pcfgqos0);
> + writel(0x00620790, &ddrc_regs->pcfg[0].pcfgqos1);
> + writel(0x00100001, &ddrc_regs->pcfg[0].pcfgwqos0);
> + writel(0x0000041f, &ddrc_regs->pcfg[0].pcfgwqos1);
> + writel(0x00000202, &ddrc_regs->freq1.derateen);
> + writel(0xec78f4b5, &ddrc_regs->freq1.derateint);
> + writel(0x00618040, &ddrc_regs->freq1.rfshctl0);
> + writel(0x00610090, &ddrc_regs->freq1.rfshtmg);
> +}
> +
> +void lpddr4_100mhz_cfg_umctl2(void)
> +{
> + writel(0x0d0b010c, &ddrc_regs->freq1.dramtmg0);
> + writel(0x00030410, &ddrc_regs->freq1.dramtmg1);
> + writel(0x0305090c, &ddrc_regs->freq1.dramtmg2);
> + writel(0x00505006, &ddrc_regs->freq1.dramtmg3);
> + writel(0x05040305, &ddrc_regs->freq1.dramtmg4);
> + writel(0x0d0e0504, &ddrc_regs->freq1.dramtmg5);
> + writel(0x0a060004, &ddrc_regs->freq1.dramtmg6);
> + writel(0x0000090e, &ddrc_regs->freq1.dramtmg7);
> + writel(0x00000032, &ddrc_regs->freq1.dramtmg14);
> + writel(0x00000000, &ddrc_regs->freq1.dramtmg15);
> + writel(0x0036001b, &ddrc_regs->freq1.dramtmg17);
> + writel(0x7e9fbeb1, &ddrc_regs->freq1.derateint);
> + writel(0x0020d040, &ddrc_regs->freq1.rfshctl0);
> + writel(0x03818200, &ddrc_regs->freq1.dfitmg0);
> + writel(0x0a1a096c, &ddrc_regs->freq1.odtcfg);
> + writel(0x00000000, &ddrc_regs->freq1.dfitmg2);
> + writel(0x00038014, &ddrc_regs->freq1.rfshtmg);
> + writel(0x00840000, &ddrc_regs->freq1.init3);
> + writel(0x0000004d, &ddrc_regs->freq1.init6);
> + writel(0x0000004d, &ddrc_regs->freq1.init7);
> + writel(0x00310000, &ddrc_regs->freq1.init4);
> +}
> +
> +void lpddr4_25mhz_cfg_umctl2(void)
> +{
> + writel(0x0d0b010c, &ddrc_regs->freq2.dramtmg0);
> + writel(0x00030410, &ddrc_regs->freq2.dramtmg1);
> + writel(0x0305090c, &ddrc_regs->freq2.dramtmg2);
> + writel(0x00505006, &ddrc_regs->freq2.dramtmg3);
> + writel(0x05040305, &ddrc_regs->freq2.dramtmg4);
> + writel(0x0d0e0504, &ddrc_regs->freq2.dramtmg5);
> + writel(0x0a060004, &ddrc_regs->freq2.dramtmg6);
> + writel(0x0000090e, &ddrc_regs->freq2.dramtmg7);
> + writel(0x00000032, &ddrc_regs->freq2.dramtmg14);
> + writel(0x00000000, &ddrc_regs->freq2.dramtmg15);
> + writel(0x0036001b, &ddrc_regs->freq2.dramtmg17);
> + writel(0x7e9fbeb1, &ddrc_regs->freq2.derateint);
> + writel(0x0020d040, &ddrc_regs->freq2.rfshctl0);
> + writel(0x03818200, &ddrc_regs->freq2.dfitmg0);
> + writel(0x0a1a096c, &ddrc_regs->freq2.odtcfg);
> + writel(0x00000000, &ddrc_regs->freq2.dfitmg2);
> + writel(0x0003800c, &ddrc_regs->freq2.rfshtmg);
> + writel(0x00840000, &ddrc_regs->freq2.init3);
> + writel(0x0000004d, &ddrc_regs->freq2.init6);
> + writel(0x0000004d, &ddrc_regs->freq2.init7);
> + writel(0x00310000, &ddrc_regs->freq2.init4);
> +}
> +
> +void ddr_init(void)
> +{
> + int ret;
> + u32 val;
> +
> + /* change the clock source of dram_apb_clk_root */
> + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
> + CLK_ROOT_SOURCE_SEL(4) |
> + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
> +
> + /* disable the clock gating */
> + writel(0xFFFF, &gpc_reg->pgc_cpu_0_1_mapping);
> + setbits_le32(&gpc_reg->pu_pgc_up_trg, BIT(5));
> +
> + writel(SRC_DDR2_ENABLE_MASK, &src->ddr2_rcr);
> +
> + dram_pll_init();
> +
> + writel(SRC_DDR1_ENABLE_MASK | SRC_DDR1_RCR_PHY_RESET_MASK |
> + SRC_DDR1_RCR_CORE_RESET_N_MASK, &src->ddr1_rcr);
> +
> + /* Configure uMCTL2's registers */
> + lpddr4_800mhz_cfg_umctl2();
> +
> + writel(SRC_DDR1_ENABLE_MASK | SRC_DDR1_RCR_PHY_RESET_MASK,
> + &src->ddr1_rcr);
> + writel(SRC_DDR1_ENABLE_MASK, &src->ddr1_rcr);
> +
> + writel(0x00000000, &ddrc_regs->dbg1);
> + writel(0x000000a8, &ddrc_regs->pwrctl);
> + /* writel(0x0000018a, DDRC_PWRCTL(0), )*/
> + writel(0x00000000, &ddrc_regs->swctl);
> + writel(0x01, DDRC_DDR_SS_GPR0);
> + writel(0x00000010, &ddrc_regs->dfimisc);
> +
> + /* Configure LPDDR4 PHY's registers */
> + lpddr4_800M_cfg_phy();
> +
> + writel(0x00000000, &ddrc_regs->rfshctl3);
> + writel(0x0000, &ddrc_regs->swctl);
> + /*
> + * ------------------- 9 -------------------
> + * Set DFIMISC.dfi_init_start to 1
> + * -----------------------------------------
> + */
> + writel(0x00000030, &ddrc_regs->dfimisc);
> + writel(0x0001, &ddrc_regs->swctl);
> +
> + /* wait DFISTAT.dfi_init_complete to 1 */
> + ret = readl_poll_timeout(&ddrc_regs->dfistat, val, val & BIT(0), 1000);
> + if (ret)
> + puts("DFISTAT.dfi_init_complete timeout\n");
> +
> + writel(0x0000, &ddrc_regs->swctl);
> +
> + /* clear DFIMISC.dfi_init_complete_en */
> + writel(0x00000010, &ddrc_regs->dfimisc);
> + writel(0x00000011, &ddrc_regs->dfimisc);
> + writel(0x00000088, &ddrc_regs->pwrctl);
> +
> + /*
> + * set SWCTL.sw_done to enable quasi-dynamic register
> + * programming outside reset.
> + */
> + writel(0x00000001, &ddrc_regs->swctl);
> +
> + /* wait SWSTAT.sw_done_ack to 1 */
> + ret = readl_poll_timeout(&ddrc_regs->swstat, val, val & BIT(0), 1000);
> + if (ret)
> + puts("SWSTAT.sw_done timeout\n");
> +
> + /* wait STAT.operating_mode([1:0] for ddr3) to normal state */
> + ret = readl_poll_timeout(&ddrc_regs->stat, val, (val & 0x3) == 1, 1000);
> + if (ret)
> + puts("STAT.operating_mode timeout\n");
> +
> + writel(0x00000088, &ddrc_regs->pwrctl);
> +
> + /* enable port 0 */
> + writel(0x00000001, &ddrc_regs->pcfg[0].pctrl);
> + writel(0x00000000, &ddrc_regs->rfshctl3);
> +
> + writel(0x0, &ddrc_regs->swctl);
> + lpddr4_100mhz_cfg_umctl2();
> + lpddr4_25mhz_cfg_umctl2();
> + writel(0x1, &ddrc_regs->swctl);
> +
> + /* wait SWSTAT.sw_done_ack to 1 */
> + ret = readl_poll_timeout(&ddrc_regs->swstat, val, val & BIT(0), 1000);
> + if (ret)
> + puts("SWSTAT.sw_done timeout\n");
> +
> + writel(0x0, &ddrc_regs->swctl);
> +}
> diff --git a/board/freescale/mx8mq_evk/ddr/ddrphy_train.c b/board/freescale/mx8mq_evk/ddr/ddrphy_train.c
> new file mode 100644
> index 0000000000..a2bf8b8449
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/ddr/ddrphy_train.c
> @@ -0,0 +1,1272 @@
> +/*
> + * Copyright 2017 NXP
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/ddr.h>
> +#include <asm/arch/sys_proto.h>
> +#include <linux/iopoll.h>
> +
> +static struct ccm_reg *ccm_reg = (struct ccm_reg *)CCM_BASE_ADDR;
> +static struct imx8m_ddrphy_regs *regs = (struct imx8m_ddrphy_regs *)IP2APB_DDRPHY_IPS_BASE_ADDR(0);
> +static struct gpc_reg *gpc_reg = (struct gpc_reg *)GPC_BASE_ADDR;
> +
> +static inline void poll_pmu_message_ready(void)
> +{
> + int ret;
> + u32 val;
> +
> + /*
> + * When BIT0 set to 0, the PMU has a message for the user
> + * 10ms seems not enough for poll message, so use 1s here.
> + */
> + ret = readl_poll_timeout(®s->reg[0xd0004], val,
> + !(val & BIT(0)), 1000000);
> + if (ret)
> + puts("PMU message timeout\n");
> +}
> +
> +static inline void ack_pmu_message_receive(void)
> +{
> + int ret;
> + u32 val;
> + /*
> + * By setting this register to 0, the user acknowledges the
> + * receipt of the message.
> + */
> + writel(0x0, ®s->reg[0xd0031]);
> +
> + /* When BIT0 set to 0, the PMU has a message for the user*/
> + ret = readl_poll_timeout(®s->reg[0xd0004], val, val & BIT(0), 1000);
> + if (ret)
> + printf("%s timeout\n", __func__);
> +
> + writel(0x1, ®s->reg[0xd0031]);
> +}
> +
> +static inline unsigned int get_mail(void)
> +{
> + unsigned int reg;
> +
> + poll_pmu_message_ready();
> +
> + /* Get the major message ID */
> + reg = readl(®s->reg[0xd0032]);
> +
> + ack_pmu_message_receive();
> +
> + return reg;
> +}
> +
> +static inline unsigned int get_stream_message(void)
> +{
> + unsigned int reg, reg2;
> +
> + poll_pmu_message_ready();
> +
> + reg = readl(®s->reg[0xd0032]);
> + reg2 = readl(®s->reg[0xd0034]);
> + reg2 = (reg2 << 16) | reg;
> +
> + ack_pmu_message_receive();
> +
> + return reg2;
> +}
> +
> +static inline void decode_major_message(unsigned int mail)
> +{
> + debug("[PMU Major message = 0x%08x]\n", mail);
> +}
> +
> +static inline void decode_streaming_message(void)
> +{
> + unsigned int string_index, arg __maybe_unused;
> + int i = 0;
> +
> + string_index = get_stream_message();
> + debug(" PMU String index = 0x%08x\n", string_index);
> + while (i < (string_index & 0xffff)) {
> + arg = get_stream_message();
> + debug(" arg[%d] = 0x%08x\n", i, arg);
> + i++;
> + }
> +
> + debug("\n");
> +}
> +
> +static void wait_ddrphy_training_complete(void)
> +{
> + unsigned int mail;
> +
> + while (true) {
> + mail = get_mail();
> + decode_major_message(mail);
> + if (mail == TRAIN_STREAM_START) {
> + decode_streaming_message();
> + } else if (mail == TRAIN_SUCCESS) {
> + debug("Training PASS\n");
> + break;
> + } else if (mail == TRAIN_FAIL) {
> + printf("Training FAILED\n");
> + break;
> + }
> + }
> +}
> +
> +static void ddr_pll_bypass_100mts(void)
> +{
> + /* change the clock source of dram_alt_clk_root to source 2 --100MHZ */
> + clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
> + CLK_ROOT_SOURCE_SEL(2) |
> + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1));
> +
> + /* change the clock source of dram_apb_clk_root to source 2 --40MHZ */
> + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
> + CLK_ROOT_SOURCE_SEL(2) |
> + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV2));
> +
> + /* disable the clock gating */
> + writel(0xFFFF, &gpc_reg->pgc_cpu_0_1_mapping);
> + /* configure ddr1_sw_pup_req */
> + setbits_le32(&gpc_reg->pu_pgc_up_trg, BIT(5));
> +
> + /* configure pll bypass mode */
> + writel(BIT(24), &ccm_reg->dram_sel.target_root_set);
> +
> + debug("PLL bypass to 100MTS setting done\n");
> +}
> +
> +static void ddr_pll_bypass_400mts(void)
> +{
> + /* change the clock source of dram_alt_clk_root to source 2 --400MHZ */
> + clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
> + CLK_ROOT_SOURCE_SEL(5) |
> + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1));
> +
> + /* change the clock source of dram_apb_clk_root to source 2 --40MHZ/2 */
> + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
> + CLK_ROOT_SOURCE_SEL(2) |
> + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV2));
> +
> + /* disable the clock gating */
> + writel(0xFFFF, &gpc_reg->pgc_cpu_0_1_mapping);
> + /* configure ddr1_sw_pup_req */
> + setbits_le32(&gpc_reg->pu_pgc_up_trg, BIT(5));
> +
> + /* configure pll bypass mode */
> + writel(BIT(24), &ccm_reg->dram_sel.target_root_set);
> +
> + debug("PLL bypass to 400MTS setting done\n");
> +}
> +
> +static void dwc_ddrphy_phyinit_usercustom_e_setdficlk(enum pstate state)
> +{
> + if (state == PS2) {
> + ddr_pll_bypass_100mts();
> + } else if (state == PS1) {
> + ddr_pll_bypass_400mts();
> + } else {
> + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
> + CLK_ROOT_SOURCE_SEL(4) |
> + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
> + writel(BIT(24), &ccm_reg->dram_sel.target_root_set);
> + }
> +}
> +
> +void lpddr4_800M_cfg_phy(void)
> +{
> + int ret;
> + u32 val;
> +
> + writel(0x02, ®s->reg[0x20110]);
> + writel(0x03, ®s->reg[0x20111]);
> + writel(0x04, ®s->reg[0x20112]);
> + writel(0x05, ®s->reg[0x20113]);
> + writel(0x00, ®s->reg[0x20114]);
> + writel(0x01, ®s->reg[0x20115]);
> + writel(0x1ff, ®s->reg[0x1005f]);
> + writel(0x1ff, ®s->reg[0x1015f]);
> + writel(0x1ff, ®s->reg[0x1105f]);
> + writel(0x1ff, ®s->reg[0x1115f]);
> + writel(0x1ff, ®s->reg[0x1205f]);
> + writel(0x1ff, ®s->reg[0x1215f]);
> + writel(0x1ff, ®s->reg[0x1305f]);
> + writel(0x1ff, ®s->reg[0x1315f]);
> + writel(0x1ff, ®s->reg[0x11005f]);
> + writel(0x1ff, ®s->reg[0x11015f]);
> + writel(0x1ff, ®s->reg[0x11105f]);
> + writel(0x1ff, ®s->reg[0x11115f]);
> + writel(0x1ff, ®s->reg[0x11205f]);
> + writel(0x1ff, ®s->reg[0x11215f]);
> + writel(0x1ff, ®s->reg[0x11305f]);
> + writel(0x1ff, ®s->reg[0x11315f]);
> + writel(0x1ff, ®s->reg[0x21005f]);
> + writel(0x1ff, ®s->reg[0x21015f]);
> + writel(0x1ff, ®s->reg[0x21105f]);
> + writel(0x1ff, ®s->reg[0x21115f]);
> + writel(0x1ff, ®s->reg[0x21205f]);
> + writel(0x1ff, ®s->reg[0x21215f]);
> + writel(0x1ff, ®s->reg[0x21305f]);
> + writel(0x1ff, ®s->reg[0x21315f]);
> + writel(0x1ff, ®s->reg[0x55]);
> + writel(0x1ff, ®s->reg[0x1055]);
> + writel(0x1ff, ®s->reg[0x2055]);
> + writel(0x1ff, ®s->reg[0x3055]);
> + writel(0x1ff, ®s->reg[0x4055]);
> + writel(0x1ff, ®s->reg[0x5055]);
> + writel(0x1ff, ®s->reg[0x6055]);
> + writel(0x1ff, ®s->reg[0x7055]);
> + writel(0x1ff, ®s->reg[0x8055]);
> + writel(0x1ff, ®s->reg[0x9055]);
> + writel(0x19, ®s->reg[0x200c5]);
> + writel(0x7, ®s->reg[0x1200c5]);
> + writel(0x7, ®s->reg[0x2200c5]);
> + writel(0x2, ®s->reg[0x2002e]);
> + writel(0x2, ®s->reg[0x12002e]);
> + writel(0x2, ®s->reg[0x22002e]);
> + writel(0x0, ®s->reg[0x90204]);
> + writel(0x0, ®s->reg[0x190204]);
> + writel(0x0, ®s->reg[0x290204]);
> + writel(0xab, ®s->reg[0x20024]);
> + writel(0x0, ®s->reg[0x2003a]);
> + writel(0xab, ®s->reg[0x120024]);
> + writel(0x0, ®s->reg[0x2003a]);
> + writel(0xab, ®s->reg[0x220024]);
> + writel(0x0, ®s->reg[0x2003a]);
> + writel(0x3, ®s->reg[0x20056]);
> + writel(0xa, ®s->reg[0x120056]);
> + writel(0xa, ®s->reg[0x220056]);
> + writel(0xe00, ®s->reg[0x1004d]);
> + writel(0xe00, ®s->reg[0x1014d]);
> + writel(0xe00, ®s->reg[0x1104d]);
> + writel(0xe00, ®s->reg[0x1114d]);
> + writel(0xe00, ®s->reg[0x1204d]);
> + writel(0xe00, ®s->reg[0x1214d]);
> + writel(0xe00, ®s->reg[0x1304d]);
> + writel(0xe00, ®s->reg[0x1314d]);
> + writel(0xe00, ®s->reg[0x11004d]);
> + writel(0xe00, ®s->reg[0x11014d]);
> + writel(0xe00, ®s->reg[0x11104d]);
> + writel(0xe00, ®s->reg[0x11114d]);
> + writel(0xe00, ®s->reg[0x11204d]);
> + writel(0xe00, ®s->reg[0x11214d]);
> + writel(0xe00, ®s->reg[0x11304d]);
> + writel(0xe00, ®s->reg[0x11314d]);
> + writel(0xe00, ®s->reg[0x21004d]);
> + writel(0xe00, ®s->reg[0x21014d]);
> + writel(0xe00, ®s->reg[0x21104d]);
> + writel(0xe00, ®s->reg[0x21114d]);
> + writel(0xe00, ®s->reg[0x21204d]);
> + writel(0xe00, ®s->reg[0x21214d]);
> + writel(0xe00, ®s->reg[0x21304d]);
> + writel(0xe00, ®s->reg[0x21314d]);
> + writel(0xe38, ®s->reg[0x10049]);
> + writel(0xe38, ®s->reg[0x10149]);
> + writel(0xe38, ®s->reg[0x11049]);
> + writel(0xe38, ®s->reg[0x11149]);
> + writel(0xe38, ®s->reg[0x12049]);
> + writel(0xe38, ®s->reg[0x12149]);
> + writel(0xe38, ®s->reg[0x13049]);
> + writel(0xe38, ®s->reg[0x13149]);
> + writel(0xe38, ®s->reg[0x110049]);
> + writel(0xe38, ®s->reg[0x110149]);
> + writel(0xe38, ®s->reg[0x111049]);
> + writel(0xe38, ®s->reg[0x111149]);
> + writel(0xe38, ®s->reg[0x112049]);
> + writel(0xe38, ®s->reg[0x112149]);
> + writel(0xe38, ®s->reg[0x113049]);
> + writel(0xe38, ®s->reg[0x113149]);
> + writel(0xe38, ®s->reg[0x210049]);
> + writel(0xe38, ®s->reg[0x210149]);
> + writel(0xe38, ®s->reg[0x211049]);
> + writel(0xe38, ®s->reg[0x211149]);
> + writel(0xe38, ®s->reg[0x212049]);
> + writel(0xe38, ®s->reg[0x212149]);
> + writel(0xe38, ®s->reg[0x213049]);
> + writel(0xe38, ®s->reg[0x213149]);
> + writel(0x21, ®s->reg[0x43]);
> + writel(0x21, ®s->reg[0x1043]);
> + writel(0x21, ®s->reg[0x2043]);
> + writel(0x21, ®s->reg[0x3043]);
> + writel(0x21, ®s->reg[0x4043]);
> + writel(0x21, ®s->reg[0x5043]);
> + writel(0x21, ®s->reg[0x6043]);
> + writel(0x21, ®s->reg[0x7043]);
> + writel(0x21, ®s->reg[0x8043]);
> + writel(0x21, ®s->reg[0x9043]);
> + writel(0x3, ®s->reg[0x20018]);
> + writel(0x4, ®s->reg[0x20075]);
> + writel(0x0, ®s->reg[0x20050]);
> + writel(0x320, ®s->reg[0x20008]);
> + writel(0x64, ®s->reg[0x120008]);
> + writel(0x19, ®s->reg[0x220008]);
> + writel(0x9, ®s->reg[0x20088]);
> + writel(0x19c, ®s->reg[0x200b2]);
> + writel(0x5a1, ®s->reg[0x10043]);
> + writel(0x5a1, ®s->reg[0x10143]);
> + writel(0x5a1, ®s->reg[0x11043]);
> + writel(0x5a1, ®s->reg[0x11143]);
> + writel(0x5a1, ®s->reg[0x12043]);
> + writel(0x5a1, ®s->reg[0x12143]);
> + writel(0x5a1, ®s->reg[0x13043]);
> + writel(0x5a1, ®s->reg[0x13143]);
> + writel(0x19c, ®s->reg[0x1200b2]);
> + writel(0x5a1, ®s->reg[0x110043]);
> + writel(0x5a1, ®s->reg[0x110143]);
> + writel(0x5a1, ®s->reg[0x111043]);
> + writel(0x5a1, ®s->reg[0x111143]);
> + writel(0x5a1, ®s->reg[0x112043]);
> + writel(0x5a1, ®s->reg[0x112143]);
> + writel(0x5a1, ®s->reg[0x113043]);
> + writel(0x5a1, ®s->reg[0x113143]);
> + writel(0x19c, ®s->reg[0x2200b2]);
> + writel(0x5a1, ®s->reg[0x210043]);
> + writel(0x5a1, ®s->reg[0x210143]);
> + writel(0x5a1, ®s->reg[0x211043]);
> + writel(0x5a1, ®s->reg[0x211143]);
> + writel(0x5a1, ®s->reg[0x212043]);
> + writel(0x5a1, ®s->reg[0x212143]);
> + writel(0x5a1, ®s->reg[0x213043]);
> + writel(0x5a1, ®s->reg[0x213143]);
> + writel(0x1, ®s->reg[0x200fa]);
> + writel(0x1, ®s->reg[0x1200fa]);
> + writel(0x1, ®s->reg[0x2200fa]);
> + writel(0x1, ®s->reg[0x20019]);
> + writel(0x1, ®s->reg[0x120019]);
> + writel(0x1, ®s->reg[0x220019]);
> + writel(0x660, ®s->reg[0x200f0]);
> + writel(0x0, ®s->reg[0x200f1]);
> + writel(0x4444, ®s->reg[0x200f2]);
> + writel(0x8888, ®s->reg[0x200f3]);
> + writel(0x5555, ®s->reg[0x200f4]);
> + writel(0x0, ®s->reg[0x200f5]);
> + writel(0x0, ®s->reg[0x200f6]);
> + writel(0xf000, ®s->reg[0x200f7]);
> + writel(0x65, ®s->reg[0x2000b]);
> + writel(0xc9, ®s->reg[0x2000c]);
> + writel(0x7d1, ®s->reg[0x2000d]);
> + writel(0x2c, ®s->reg[0x2000e]);
> + writel(0xd, ®s->reg[0x12000b]);
> + writel(0x1a, ®s->reg[0x12000c]);
> + writel(0xfb, ®s->reg[0x12000d]);
> + writel(0x10, ®s->reg[0x12000e]);
> + writel(0x4, ®s->reg[0x22000b]);
> + writel(0x7, ®s->reg[0x22000c]);
> + writel(0x3f, ®s->reg[0x22000d]);
> + writel(0x10, ®s->reg[0x22000e]);
> + writel(0x0, ®s->reg[0x20025]);
> + writel(0x0, ®s->reg[0x2002d]);
> + writel(0x0, ®s->reg[0x12002d]);
> + writel(0x0, ®s->reg[0x22002d]);
> + writel(0x2, ®s->reg[0x20060]);
> + writel(0x0, ®s->reg[0xd0000]);
> +
> + /* load the 1D training image */
> + ddr_load_train_code(FW_1D_IMAGE);
> +
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> +
> + /* set the PHY input clock to the desired frequency for pstate 2 */
> + dwc_ddrphy_phyinit_usercustom_e_setdficlk(PS2);
> +
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0x54000]);
> + writel(0x0, ®s->reg[0x54001]);
> + writel(0x102, ®s->reg[0x54002]);
> + writel(0x64, ®s->reg[0x54003]);
> + writel(0x2, ®s->reg[0x54004]);
> + writel(0x2828, ®s->reg[0x54005]);
> + writel(0x14, ®s->reg[0x54006]);
> + writel(0x0, ®s->reg[0x54007]);
> + writel(0x121f, ®s->reg[0x54008]);
> + writel(0xc8, ®s->reg[0x54009]);
> + writel(0x0, ®s->reg[0x5400a]);
> + writel(0x2, ®s->reg[0x5400b]);
> + writel(0x0, ®s->reg[0x5400c]);
> + writel(0x0, ®s->reg[0x5400d]);
> + writel(0x0, ®s->reg[0x5400e]);
> + writel(0x0, ®s->reg[0x5400f]);
> + writel(0x0, ®s->reg[0x54010]);
> + writel(0x0, ®s->reg[0x54011]);
> + writel(0x310, ®s->reg[0x54012]);
> + writel(0x0, ®s->reg[0x54013]);
> + writel(0x0, ®s->reg[0x54014]);
> + writel(0x0, ®s->reg[0x54015]);
> + writel(0x0, ®s->reg[0x54016]);
> + writel(0x0, ®s->reg[0x54017]);
> + writel(0x0, ®s->reg[0x54018]);
> + writel(0x4, ®s->reg[0x54019]);
> + writel(0x31, ®s->reg[0x5401a]);
> + writel(0x4d46, ®s->reg[0x5401b]);
> + writel(0x4d08, ®s->reg[0x5401c]);
> + writel(0x0, ®s->reg[0x5401d]);
> + writel(0x5, ®s->reg[0x5401e]);
> + writel(0x4, ®s->reg[0x5401f]);
> + writel(0x31, ®s->reg[0x54020]);
> + writel(0x4d46, ®s->reg[0x54021]);
> + writel(0x4d08, ®s->reg[0x54022]);
> + writel(0x0, ®s->reg[0x54023]);
> + writel(0x5, ®s->reg[0x54024]);
> + writel(0x0, ®s->reg[0x54025]);
> + writel(0x0, ®s->reg[0x54026]);
> + writel(0x0, ®s->reg[0x54027]);
> + writel(0x0, ®s->reg[0x54028]);
> + writel(0x0, ®s->reg[0x54029]);
> + writel(0x0, ®s->reg[0x5402a]);
> + writel(0x1000, ®s->reg[0x5402b]);
> + writel(0x3, ®s->reg[0x5402c]);
> + writel(0x0, ®s->reg[0x5402d]);
> + writel(0x0, ®s->reg[0x5402e]);
> + writel(0x0, ®s->reg[0x5402f]);
> + writel(0x0, ®s->reg[0x54030]);
> + writel(0x0, ®s->reg[0x54031]);
> + writel(0x400, ®s->reg[0x54032]);
> + writel(0x3100, ®s->reg[0x54033]);
> + writel(0x4600, ®s->reg[0x54034]);
> + writel(0x84d, ®s->reg[0x54035]);
> + writel(0x4d, ®s->reg[0x54036]);
> + writel(0x500, ®s->reg[0x54037]);
> + writel(0x400, ®s->reg[0x54038]);
> + writel(0x3100, ®s->reg[0x54039]);
> + writel(0x4600, ®s->reg[0x5403a]);
> + writel(0x84d, ®s->reg[0x5403b]);
> + writel(0x4d, ®s->reg[0x5403c]);
> + writel(0x500, ®s->reg[0x5403d]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x9, ®s->reg[0xd0099]);
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0099]);
> +
> + wait_ddrphy_training_complete();
> +
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> +
> + /* set the PHY input clock to the desired frequency for pstate 1 */
> + dwc_ddrphy_phyinit_usercustom_e_setdficlk(PS1);
> +
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0x54000]);
> + writel(0x0, ®s->reg[0x54001]);
> + writel(0x101, ®s->reg[0x54002]);
> + writel(0x190, ®s->reg[0x54003]);
> + writel(0x2, ®s->reg[0x54004]);
> + writel(0x2828, ®s->reg[0x54005]);
> + writel(0x14, ®s->reg[0x54006]);
> + writel(0x0, ®s->reg[0x54007]);
> + writel(0x121f, ®s->reg[0x54008]);
> + writel(0xc8, ®s->reg[0x54009]);
> + writel(0x0, ®s->reg[0x5400a]);
> + writel(0x2, ®s->reg[0x5400b]);
> + writel(0x0, ®s->reg[0x5400c]);
> + writel(0x0, ®s->reg[0x5400d]);
> + writel(0x0, ®s->reg[0x5400e]);
> + writel(0x0, ®s->reg[0x5400f]);
> + writel(0x0, ®s->reg[0x54010]);
> + writel(0x0, ®s->reg[0x54011]);
> + writel(0x310, ®s->reg[0x54012]);
> + writel(0x0, ®s->reg[0x54013]);
> + writel(0x0, ®s->reg[0x54014]);
> + writel(0x0, ®s->reg[0x54015]);
> + writel(0x0, ®s->reg[0x54016]);
> + writel(0x0, ®s->reg[0x54017]);
> + writel(0x0, ®s->reg[0x54018]);
> + writel(0x4, ®s->reg[0x54019]);
> + writel(0x31, ®s->reg[0x5401a]);
> + writel(0x4d46, ®s->reg[0x5401b]);
> + writel(0x4d08, ®s->reg[0x5401c]);
> + writel(0x0, ®s->reg[0x5401d]);
> + writel(0x5, ®s->reg[0x5401e]);
> + writel(0x4, ®s->reg[0x5401f]);
> + writel(0x31, ®s->reg[0x54020]);
> + writel(0x4d46, ®s->reg[0x54021]);
> + writel(0x4d08, ®s->reg[0x54022]);
> + writel(0x0, ®s->reg[0x54023]);
> + writel(0x5, ®s->reg[0x54024]);
> + writel(0x0, ®s->reg[0x54025]);
> + writel(0x0, ®s->reg[0x54026]);
> + writel(0x0, ®s->reg[0x54027]);
> + writel(0x0, ®s->reg[0x54028]);
> + writel(0x0, ®s->reg[0x54029]);
> + writel(0x0, ®s->reg[0x5402a]);
> + writel(0x1000, ®s->reg[0x5402b]);
> + writel(0x3, ®s->reg[0x5402c]);
> + writel(0x0, ®s->reg[0x5402d]);
> + writel(0x0, ®s->reg[0x5402e]);
> + writel(0x0, ®s->reg[0x5402f]);
> + writel(0x0, ®s->reg[0x54030]);
> + writel(0x0, ®s->reg[0x54031]);
> + writel(0x400, ®s->reg[0x54032]);
> + writel(0x3100, ®s->reg[0x54033]);
> + writel(0x4600, ®s->reg[0x54034]);
> + writel(0x84d, ®s->reg[0x54035]);
> + writel(0x4d, ®s->reg[0x54036]);
> + writel(0x500, ®s->reg[0x54037]);
> + writel(0x400, ®s->reg[0x54038]);
> + writel(0x3100, ®s->reg[0x54039]);
> + writel(0x4600, ®s->reg[0x5403a]);
> + writel(0x84d, ®s->reg[0x5403b]);
> + writel(0x4d, ®s->reg[0x5403c]);
> + writel(0x500, ®s->reg[0x5403d]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x9, ®s->reg[0xd0099]);
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0099]);
> +
> + wait_ddrphy_training_complete();
> +
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> +
> + /* set the PHY input clock to the desired frequency for pstate 0 */
> + dwc_ddrphy_phyinit_usercustom_e_setdficlk(PS0);
> +
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0x54000]);
> + writel(0x0, ®s->reg[0x54001]);
> + writel(0x0, ®s->reg[0x54002]);
> + writel(0xc80, ®s->reg[0x54003]);
> + writel(0x2, ®s->reg[0x54004]);
> + writel(0x2828, ®s->reg[0x54005]);
> + writel(0x14, ®s->reg[0x54006]);
> + writel(0x0, ®s->reg[0x54007]);
> + writel(0x131f, ®s->reg[0x54008]);
> + writel(0x5, ®s->reg[0x54009]);
> + writel(0x0, ®s->reg[0x5400a]);
> + writel(0x2, ®s->reg[0x5400b]);
> + writel(0x0, ®s->reg[0x5400c]);
> + writel(0x0, ®s->reg[0x5400d]);
> + writel(0x0, ®s->reg[0x5400e]);
> + writel(0x0, ®s->reg[0x5400f]);
> + writel(0x0, ®s->reg[0x54010]);
> + writel(0x0, ®s->reg[0x54011]);
> + writel(0x310, ®s->reg[0x54012]);
> + writel(0x0, ®s->reg[0x54013]);
> + writel(0x0, ®s->reg[0x54014]);
> + writel(0x0, ®s->reg[0x54015]);
> + writel(0x0, ®s->reg[0x54016]);
> + writel(0x0, ®s->reg[0x54017]);
> + writel(0x0, ®s->reg[0x54018]);
> + writel(0x2dd4, ®s->reg[0x54019]);
> + writel(0x31, ®s->reg[0x5401a]);
> + writel(0x4d46, ®s->reg[0x5401b]);
> + writel(0x4d08, ®s->reg[0x5401c]);
> + writel(0x0, ®s->reg[0x5401d]);
> + writel(0x5, ®s->reg[0x5401e]);
> + writel(0x2dd4, ®s->reg[0x5401f]);
> + writel(0x31, ®s->reg[0x54020]);
> + writel(0x4d46, ®s->reg[0x54021]);
> + writel(0x4d08, ®s->reg[0x54022]);
> + writel(0x0, ®s->reg[0x54023]);
> + writel(0x5, ®s->reg[0x54024]);
> + writel(0x0, ®s->reg[0x54025]);
> + writel(0x0, ®s->reg[0x54026]);
> + writel(0x0, ®s->reg[0x54027]);
> + writel(0x0, ®s->reg[0x54028]);
> + writel(0x0, ®s->reg[0x54029]);
> + writel(0x0, ®s->reg[0x5402a]);
> + writel(0x1000, ®s->reg[0x5402b]);
> + writel(0x3, ®s->reg[0x5402c]);
> + writel(0x0, ®s->reg[0x5402d]);
> + writel(0x0, ®s->reg[0x5402e]);
> + writel(0x0, ®s->reg[0x5402f]);
> + writel(0x0, ®s->reg[0x54030]);
> + writel(0x0, ®s->reg[0x54031]);
> + writel(0xd400, ®s->reg[0x54032]);
> + writel(0x312d, ®s->reg[0x54033]);
> + writel(0x4600, ®s->reg[0x54034]);
> + writel(0x84d, ®s->reg[0x54035]);
> + writel(0x4d, ®s->reg[0x54036]);
> + writel(0x500, ®s->reg[0x54037]);
> + writel(0xd400, ®s->reg[0x54038]);
> + writel(0x312d, ®s->reg[0x54039]);
> + writel(0x4600, ®s->reg[0x5403a]);
> + writel(0x84d, ®s->reg[0x5403b]);
> + writel(0x4d, ®s->reg[0x5403c]);
> + writel(0x500, ®s->reg[0x5403d]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x9, ®s->reg[0xd0099]);
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0099]);
> +
> + wait_ddrphy_training_complete();
> +
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0xd0000]);
> +
> + /* load the 2D training image */
> + ddr_load_train_code(FW_2D_IMAGE);
> +
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0xd0000]);
> +
> + writel(0x0, ®s->reg[0x54000]);
> + writel(0x0, ®s->reg[0x54001]);
> + writel(0x0, ®s->reg[0x54002]);
> + writel(0xc80, ®s->reg[0x54003]);
> + writel(0x2, ®s->reg[0x54004]);
> + writel(0x2828, ®s->reg[0x54005]);
> + writel(0x14, ®s->reg[0x54006]);
> + writel(0x0, ®s->reg[0x54007]);
> + writel(0x61, ®s->reg[0x54008]);
> + writel(0xc8, ®s->reg[0x54009]);
> + writel(0x0, ®s->reg[0x5400a]);
> + writel(0x2, ®s->reg[0x5400b]);
> + writel(0x0, ®s->reg[0x5400c]);
> + writel(0x100, ®s->reg[0x5400d]);
> + writel(0x0, ®s->reg[0x5400e]);
> + writel(0x100, ®s->reg[0x5400f]);
> + writel(0x1f7f, ®s->reg[0x54010]);
> + writel(0x0, ®s->reg[0x54011]);
> + writel(0x310, ®s->reg[0x54012]);
> + writel(0x0, ®s->reg[0x54013]);
> + writel(0x0, ®s->reg[0x54014]);
> + writel(0x0, ®s->reg[0x54015]);
> + writel(0x0, ®s->reg[0x54016]);
> + writel(0x0, ®s->reg[0x54017]);
> + writel(0x0, ®s->reg[0x54018]);
> + writel(0x2dd4, ®s->reg[0x54019]);
> + writel(0x31, ®s->reg[0x5401a]);
> + writel(0x4d46, ®s->reg[0x5401b]);
> + writel(0x4d08, ®s->reg[0x5401c]);
> + writel(0x0, ®s->reg[0x5401d]);
> + writel(0x5, ®s->reg[0x5401e]);
> + writel(0x2dd4, ®s->reg[0x5401f]);
> + writel(0x31, ®s->reg[0x54020]);
> + writel(0x4d46, ®s->reg[0x54021]);
> + writel(0x4d08, ®s->reg[0x54022]);
> + writel(0x0, ®s->reg[0x54023]);
> + writel(0x5, ®s->reg[0x54024]);
> + writel(0x0, ®s->reg[0x54025]);
> + writel(0x0, ®s->reg[0x54026]);
> + writel(0x0, ®s->reg[0x54027]);
> + writel(0x0, ®s->reg[0x54028]);
> + writel(0x0, ®s->reg[0x54029]);
> + writel(0x0, ®s->reg[0x5402a]);
> + writel(0x1000, ®s->reg[0x5402b]);
> + writel(0x3, ®s->reg[0x5402c]);
> + writel(0x0, ®s->reg[0x5402d]);
> + writel(0x0, ®s->reg[0x5402e]);
> + writel(0x0, ®s->reg[0x5402f]);
> + writel(0x0, ®s->reg[0x54030]);
> + writel(0x0, ®s->reg[0x54031]);
> + writel(0xd400, ®s->reg[0x54032]);
> + writel(0x312d, ®s->reg[0x54033]);
> + writel(0x4600, ®s->reg[0x54034]);
> + writel(0x084d, ®s->reg[0x54035]);
> + writel(0x4d, ®s->reg[0x54036]);
> + writel(0x500, ®s->reg[0x54037]);
> + writel(0xd400, ®s->reg[0x54038]);
> + writel(0x312d, ®s->reg[0x54039]);
> + writel(0x4600, ®s->reg[0x5403a]);
> + writel(0x084d, ®s->reg[0x5403b]);
> + writel(0x4d, ®s->reg[0x5403c]);
> + writel(0x500, ®s->reg[0x5403d]);
> + writel(0x1, ®s->reg[0xd0000]);
> + /* Execute the Training Firmware */
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x9, ®s->reg[0xd0099]);
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0099]);
> + /* wait for 2D training complete */
> + wait_ddrphy_training_complete();
> +
> + writel(0x1, ®s->reg[0xd0099]);
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x1, ®s->reg[0xd0000]);
> +
> + /* (I) Load PHY Init Engine Image */
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x10, ®s->reg[0x90000]);
> + writel(0x400, ®s->reg[0x90001]);
> + writel(0x10e, ®s->reg[0x90002]);
> + writel(0x0, ®s->reg[0x90003]);
> + writel(0x0, ®s->reg[0x90004]);
> + writel(0x8, ®s->reg[0x90005]);
> + writel(0xb, ®s->reg[0x90029]);
> + writel(0x480, ®s->reg[0x9002a]);
> + writel(0x109, ®s->reg[0x9002b]);
> + writel(0x8, ®s->reg[0x9002c]);
> + writel(0x448, ®s->reg[0x9002d]);
> + writel(0x139, ®s->reg[0x9002e]);
> + writel(0x8, ®s->reg[0x9002f]);
> + writel(0x478, ®s->reg[0x90030]);
> + writel(0x109, ®s->reg[0x90031]);
> + writel(0x0, ®s->reg[0x90032]);
> + writel(0xe8, ®s->reg[0x90033]);
> + writel(0x109, ®s->reg[0x90034]);
> + writel(0x2, ®s->reg[0x90035]);
> + writel(0x10, ®s->reg[0x90036]);
> + writel(0x139, ®s->reg[0x90037]);
> + writel(0xf, ®s->reg[0x90038]);
> + writel(0x7c0, ®s->reg[0x90039]);
> + writel(0x139, ®s->reg[0x9003a]);
> + writel(0x44, ®s->reg[0x9003b]);
> + writel(0x630, ®s->reg[0x9003c]);
> + writel(0x159, ®s->reg[0x9003d]);
> + writel(0x14f, ®s->reg[0x9003e]);
> + writel(0x630, ®s->reg[0x9003f]);
> + writel(0x159, ®s->reg[0x90040]);
> + writel(0x47, ®s->reg[0x90041]);
> + writel(0x630, ®s->reg[0x90042]);
> + writel(0x149, ®s->reg[0x90043]);
> + writel(0x4f, ®s->reg[0x90044]);
> + writel(0x630, ®s->reg[0x90045]);
> + writel(0x179, ®s->reg[0x90046]);
> + writel(0x8, ®s->reg[0x90047]);
> + writel(0xe0, ®s->reg[0x90048]);
> + writel(0x109, ®s->reg[0x90049]);
> + writel(0x0, ®s->reg[0x9004a]);
> + writel(0x7c8, ®s->reg[0x9004b]);
> + writel(0x109, ®s->reg[0x9004c]);
> + writel(0x0, ®s->reg[0x9004d]);
> + writel(0x1, ®s->reg[0x9004e]);
> + writel(0x8, ®s->reg[0x9004f]);
> + writel(0x0, ®s->reg[0x90050]);
> + writel(0x45a, ®s->reg[0x90051]);
> + writel(0x9, ®s->reg[0x90052]);
> + writel(0x0, ®s->reg[0x90053]);
> + writel(0x448, ®s->reg[0x90054]);
> + writel(0x109, ®s->reg[0x90055]);
> + writel(0x40, ®s->reg[0x90056]);
> + writel(0x630, ®s->reg[0x90057]);
> + writel(0x179, ®s->reg[0x90058]);
> + writel(0x1, ®s->reg[0x90059]);
> + writel(0x618, ®s->reg[0x9005a]);
> + writel(0x109, ®s->reg[0x9005b]);
> + writel(0x40c0, ®s->reg[0x9005c]);
> + writel(0x630, ®s->reg[0x9005d]);
> + writel(0x149, ®s->reg[0x9005e]);
> + writel(0x8, ®s->reg[0x9005f]);
> + writel(0x4, ®s->reg[0x90060]);
> + writel(0x48, ®s->reg[0x90061]);
> + writel(0x4040, ®s->reg[0x90062]);
> + writel(0x630, ®s->reg[0x90063]);
> + writel(0x149, ®s->reg[0x90064]);
> + writel(0x0, ®s->reg[0x90065]);
> + writel(0x4, ®s->reg[0x90066]);
> + writel(0x48, ®s->reg[0x90067]);
> + writel(0x40, ®s->reg[0x90068]);
> + writel(0x630, ®s->reg[0x90069]);
> + writel(0x149, ®s->reg[0x9006a]);
> + writel(0x10, ®s->reg[0x9006b]);
> + writel(0x4, ®s->reg[0x9006c]);
> + writel(0x18, ®s->reg[0x9006d]);
> + writel(0x0, ®s->reg[0x9006e]);
> + writel(0x4, ®s->reg[0x9006f]);
> + writel(0x78, ®s->reg[0x90070]);
> + writel(0x549, ®s->reg[0x90071]);
> + writel(0x630, ®s->reg[0x90072]);
> + writel(0x159, ®s->reg[0x90073]);
> + writel(0xd49, ®s->reg[0x90074]);
> + writel(0x630, ®s->reg[0x90075]);
> + writel(0x159, ®s->reg[0x90076]);
> + writel(0x94a, ®s->reg[0x90077]);
> + writel(0x630, ®s->reg[0x90078]);
> + writel(0x159, ®s->reg[0x90079]);
> + writel(0x441, ®s->reg[0x9007a]);
> + writel(0x630, ®s->reg[0x9007b]);
> + writel(0x149, ®s->reg[0x9007c]);
> + writel(0x42, ®s->reg[0x9007d]);
> + writel(0x630, ®s->reg[0x9007e]);
> + writel(0x149, ®s->reg[0x9007f]);
> + writel(0x1, ®s->reg[0x90080]);
> + writel(0x630, ®s->reg[0x90081]);
> + writel(0x149, ®s->reg[0x90082]);
> + writel(0x0, ®s->reg[0x90083]);
> + writel(0xe0, ®s->reg[0x90084]);
> + writel(0x109, ®s->reg[0x90085]);
> + writel(0xa, ®s->reg[0x90086]);
> + writel(0x10, ®s->reg[0x90087]);
> + writel(0x109, ®s->reg[0x90088]);
> + writel(0x9, ®s->reg[0x90089]);
> + writel(0x3c0, ®s->reg[0x9008a]);
> + writel(0x149, ®s->reg[0x9008b]);
> + writel(0x9, ®s->reg[0x9008c]);
> + writel(0x3c0, ®s->reg[0x9008d]);
> + writel(0x159, ®s->reg[0x9008e]);
> + writel(0x18, ®s->reg[0x9008f]);
> + writel(0x10, ®s->reg[0x90090]);
> + writel(0x109, ®s->reg[0x90091]);
> + writel(0x0, ®s->reg[0x90092]);
> + writel(0x3c0, ®s->reg[0x90093]);
> + writel(0x109, ®s->reg[0x90094]);
> + writel(0x18, ®s->reg[0x90095]);
> + writel(0x4, ®s->reg[0x90096]);
> + writel(0x48, ®s->reg[0x90097]);
> + writel(0x18, ®s->reg[0x90098]);
> + writel(0x4, ®s->reg[0x90099]);
> + writel(0x58, ®s->reg[0x9009a]);
> + writel(0xa, ®s->reg[0x9009b]);
> + writel(0x10, ®s->reg[0x9009c]);
> + writel(0x109, ®s->reg[0x9009d]);
> + writel(0x2, ®s->reg[0x9009e]);
> + writel(0x10, ®s->reg[0x9009f]);
> + writel(0x109, ®s->reg[0x900a0]);
> + writel(0x5, ®s->reg[0x900a1]);
> + writel(0x7c0, ®s->reg[0x900a2]);
> + writel(0x109, ®s->reg[0x900a3]);
> + writel(0x10, ®s->reg[0x900a4]);
> + writel(0x10, ®s->reg[0x900a5]);
> + writel(0x109, ®s->reg[0x900a6]);
> + writel(0x811, ®s->reg[0x40000]);
> + writel(0x880, ®s->reg[0x40020]);
> + writel(0x0, ®s->reg[0x40040]);
> + writel(0x0, ®s->reg[0x40060]);
> + writel(0x4016, ®s->reg[0x40001]);
> + writel(0x83, ®s->reg[0x40021]);
> + writel(0x4f, ®s->reg[0x40041]);
> + writel(0x0, ®s->reg[0x40061]);
> + writel(0x4040, ®s->reg[0x40002]);
> + writel(0x83, ®s->reg[0x40022]);
> + writel(0x51, ®s->reg[0x40042]);
> + writel(0x0, ®s->reg[0x40062]);
> + writel(0x811, ®s->reg[0x40003]);
> + writel(0x880, ®s->reg[0x40023]);
> + writel(0x0, ®s->reg[0x40043]);
> + writel(0x0, ®s->reg[0x40063]);
> + writel(0x720, ®s->reg[0x40004]);
> + writel(0xf, ®s->reg[0x40024]);
> + writel(0x1740, ®s->reg[0x40044]);
> + writel(0x0, ®s->reg[0x40064]);
> + writel(0x16, ®s->reg[0x40005]);
> + writel(0x83, ®s->reg[0x40025]);
> + writel(0x4b, ®s->reg[0x40045]);
> + writel(0x0, ®s->reg[0x40065]);
> + writel(0x716, ®s->reg[0x40006]);
> + writel(0xf, ®s->reg[0x40026]);
> + writel(0x2001, ®s->reg[0x40046]);
> + writel(0x0, ®s->reg[0x40066]);
> + writel(0x716, ®s->reg[0x40007]);
> + writel(0xf, ®s->reg[0x40027]);
> + writel(0x2800, ®s->reg[0x40047]);
> + writel(0x0, ®s->reg[0x40067]);
> + writel(0x716, ®s->reg[0x40008]);
> + writel(0xf, ®s->reg[0x40028]);
> + writel(0xf00, ®s->reg[0x40048]);
> + writel(0x0, ®s->reg[0x40068]);
> + writel(0x720, ®s->reg[0x40009]);
> + writel(0xf, ®s->reg[0x40029]);
> + writel(0x1400, ®s->reg[0x40049]);
> + writel(0x0, ®s->reg[0x40069]);
> + writel(0xe08, ®s->reg[0x4000a]);
> + writel(0xc15, ®s->reg[0x4002a]);
> + writel(0x0, ®s->reg[0x4004a]);
> + writel(0x0, ®s->reg[0x4006a]);
> + writel(0x623, ®s->reg[0x4000b]);
> + writel(0x15, ®s->reg[0x4002b]);
> + writel(0x0, ®s->reg[0x4004b]);
> + writel(0x0, ®s->reg[0x4006b]);
> + writel(0x4004, ®s->reg[0x4000c]);
> + writel(0x80, ®s->reg[0x4002c]);
> + writel(0x0, ®s->reg[0x4004c]);
> + writel(0x0, ®s->reg[0x4006c]);
> + writel(0xe08, ®s->reg[0x4000d]);
> + writel(0xc1a, ®s->reg[0x4002d]);
> + writel(0x0, ®s->reg[0x4004d]);
> + writel(0x0, ®s->reg[0x4006d]);
> + writel(0x623, ®s->reg[0x4000e]);
> + writel(0x1a, ®s->reg[0x4002e]);
> + writel(0x0, ®s->reg[0x4004e]);
> + writel(0x0, ®s->reg[0x4006e]);
> + writel(0x4040, ®s->reg[0x4000f]);
> + writel(0x80, ®s->reg[0x4002f]);
> + writel(0x0, ®s->reg[0x4004f]);
> + writel(0x0, ®s->reg[0x4006f]);
> + writel(0x2604, ®s->reg[0x40010]);
> + writel(0x15, ®s->reg[0x40030]);
> + writel(0x0, ®s->reg[0x40050]);
> + writel(0x0, ®s->reg[0x40070]);
> + writel(0x708, ®s->reg[0x40011]);
> + writel(0x5, ®s->reg[0x40031]);
> + writel(0x0, ®s->reg[0x40051]);
> + writel(0x2002, ®s->reg[0x40071]);
> + writel(0x8, ®s->reg[0x40012]);
> + writel(0x80, ®s->reg[0x40032]);
> + writel(0x0, ®s->reg[0x40052]);
> + writel(0x0, ®s->reg[0x40072]);
> + writel(0x2604, ®s->reg[0x40013]);
> + writel(0x1a, ®s->reg[0x40033]);
> + writel(0x0, ®s->reg[0x40053]);
> + writel(0x0, ®s->reg[0x40073]);
> + writel(0x708, ®s->reg[0x40014]);
> + writel(0xa, ®s->reg[0x40034]);
> + writel(0x0, ®s->reg[0x40054]);
> + writel(0x2002, ®s->reg[0x40074]);
> + writel(0x4040, ®s->reg[0x40015]);
> + writel(0x80, ®s->reg[0x40035]);
> + writel(0x0, ®s->reg[0x40055]);
> + writel(0x0, ®s->reg[0x40075]);
> + writel(0x60a, ®s->reg[0x40016]);
> + writel(0x15, ®s->reg[0x40036]);
> + writel(0x1200, ®s->reg[0x40056]);
> + writel(0x0, ®s->reg[0x40076]);
> + writel(0x61a, ®s->reg[0x40017]);
> + writel(0x15, ®s->reg[0x40037]);
> + writel(0x1300, ®s->reg[0x40057]);
> + writel(0x0, ®s->reg[0x40077]);
> + writel(0x60a, ®s->reg[0x40018]);
> + writel(0x1a, ®s->reg[0x40038]);
> + writel(0x1200, ®s->reg[0x40058]);
> + writel(0x0, ®s->reg[0x40078]);
> + writel(0x642, ®s->reg[0x40019]);
> + writel(0x1a, ®s->reg[0x40039]);
> + writel(0x1300, ®s->reg[0x40059]);
> + writel(0x0, ®s->reg[0x40079]);
> + writel(0x4808, ®s->reg[0x4001a]);
> + writel(0x880, ®s->reg[0x4003a]);
> + writel(0x0, ®s->reg[0x4005a]);
> + writel(0x0, ®s->reg[0x4007a]);
> + writel(0x0, ®s->reg[0x900a7]);
> + writel(0x790, ®s->reg[0x900a8]);
> + writel(0x11a, ®s->reg[0x900a9]);
> + writel(0x8, ®s->reg[0x900aa]);
> + writel(0x7aa, ®s->reg[0x900ab]);
> + writel(0x2a, ®s->reg[0x900ac]);
> + writel(0x10, ®s->reg[0x900ad]);
> + writel(0x7b2, ®s->reg[0x900ae]);
> + writel(0x2a, ®s->reg[0x900af]);
> + writel(0x0, ®s->reg[0x900b0]);
> + writel(0x7c8, ®s->reg[0x900b1]);
> + writel(0x109, ®s->reg[0x900b2]);
> + writel(0x10, ®s->reg[0x900b3]);
> + writel(0x2a8, ®s->reg[0x900b4]);
> + writel(0x129, ®s->reg[0x900b5]);
> + writel(0x8, ®s->reg[0x900b6]);
> + writel(0x370, ®s->reg[0x900b7]);
> + writel(0x129, ®s->reg[0x900b8]);
> + writel(0xa, ®s->reg[0x900b9]);
> + writel(0x3c8, ®s->reg[0x900ba]);
> + writel(0x1a9, ®s->reg[0x900bb]);
> + writel(0xc, ®s->reg[0x900bc]);
> + writel(0x408, ®s->reg[0x900bd]);
> + writel(0x199, ®s->reg[0x900be]);
> + writel(0x14, ®s->reg[0x900bf]);
> + writel(0x790, ®s->reg[0x900c0]);
> + writel(0x11a, ®s->reg[0x900c1]);
> + writel(0x8, ®s->reg[0x900c2]);
> + writel(0x4, ®s->reg[0x900c3]);
> + writel(0x18, ®s->reg[0x900c4]);
> + writel(0xc, ®s->reg[0x900c5]);
> + writel(0x408, ®s->reg[0x900c6]);
> + writel(0x199, ®s->reg[0x900c7]);
> + writel(0x8, ®s->reg[0x900c8]);
> + writel(0x8568, ®s->reg[0x900c9]);
> + writel(0x108, ®s->reg[0x900ca]);
> + writel(0x18, ®s->reg[0x900cb]);
> + writel(0x790, ®s->reg[0x900cc]);
> + writel(0x16a, ®s->reg[0x900cd]);
> + writel(0x8, ®s->reg[0x900ce]);
> + writel(0x1d8, ®s->reg[0x900cf]);
> + writel(0x169, ®s->reg[0x900d0]);
> + writel(0x10, ®s->reg[0x900d1]);
> + writel(0x8558, ®s->reg[0x900d2]);
> + writel(0x168, ®s->reg[0x900d3]);
> + writel(0x70, ®s->reg[0x900d4]);
> + writel(0x788, ®s->reg[0x900d5]);
> + writel(0x16a, ®s->reg[0x900d6]);
> + writel(0x1ff8, ®s->reg[0x900d7]);
> + writel(0x85a8, ®s->reg[0x900d8]);
> + writel(0x1e8, ®s->reg[0x900d9]);
> + writel(0x50, ®s->reg[0x900da]);
> + writel(0x798, ®s->reg[0x900db]);
> + writel(0x16a, ®s->reg[0x900dc]);
> + writel(0x60, ®s->reg[0x900dd]);
> + writel(0x7a0, ®s->reg[0x900de]);
> + writel(0x16a, ®s->reg[0x900df]);
> + writel(0x8, ®s->reg[0x900e0]);
> + writel(0x8310, ®s->reg[0x900e1]);
> + writel(0x168, ®s->reg[0x900e2]);
> + writel(0x8, ®s->reg[0x900e3]);
> + writel(0xa310, ®s->reg[0x900e4]);
> + writel(0x168, ®s->reg[0x900e5]);
> + writel(0xa, ®s->reg[0x900e6]);
> + writel(0x408, ®s->reg[0x900e7]);
> + writel(0x169, ®s->reg[0x900e8]);
> + writel(0x6e, ®s->reg[0x900e9]);
> + writel(0x0, ®s->reg[0x900ea]);
> + writel(0x68, ®s->reg[0x900eb]);
> + writel(0x0, ®s->reg[0x900ec]);
> + writel(0x408, ®s->reg[0x900ed]);
> + writel(0x169, ®s->reg[0x900ee]);
> + writel(0x0, ®s->reg[0x900ef]);
> + writel(0x8310, ®s->reg[0x900f0]);
> + writel(0x168, ®s->reg[0x900f1]);
> + writel(0x0, ®s->reg[0x900f2]);
> + writel(0xa310, ®s->reg[0x900f3]);
> + writel(0x168, ®s->reg[0x900f4]);
> + writel(0x1ff8, ®s->reg[0x900f5]);
> + writel(0x85a8, ®s->reg[0x900f6]);
> + writel(0x1e8, ®s->reg[0x900f7]);
> + writel(0x68, ®s->reg[0x900f8]);
> + writel(0x798, ®s->reg[0x900f9]);
> + writel(0x16a, ®s->reg[0x900fa]);
> + writel(0x78, ®s->reg[0x900fb]);
> + writel(0x7a0, ®s->reg[0x900fc]);
> + writel(0x16a, ®s->reg[0x900fd]);
> + writel(0x68, ®s->reg[0x900fe]);
> + writel(0x790, ®s->reg[0x900ff]);
> + writel(0x16a, ®s->reg[0x90100]);
> + writel(0x8, ®s->reg[0x90101]);
> + writel(0x8b10, ®s->reg[0x90102]);
> + writel(0x168, ®s->reg[0x90103]);
> + writel(0x8, ®s->reg[0x90104]);
> + writel(0xab10, ®s->reg[0x90105]);
> + writel(0x168, ®s->reg[0x90106]);
> + writel(0xa, ®s->reg[0x90107]);
> + writel(0x408, ®s->reg[0x90108]);
> + writel(0x169, ®s->reg[0x90109]);
> + writel(0x58, ®s->reg[0x9010a]);
> + writel(0x0, ®s->reg[0x9010b]);
> + writel(0x68, ®s->reg[0x9010c]);
> + writel(0x0, ®s->reg[0x9010d]);
> + writel(0x408, ®s->reg[0x9010e]);
> + writel(0x169, ®s->reg[0x9010f]);
> + writel(0x0, ®s->reg[0x90110]);
> + writel(0x8b10, ®s->reg[0x90111]);
> + writel(0x168, ®s->reg[0x90112]);
> + writel(0x0, ®s->reg[0x90113]);
> + writel(0xab10, ®s->reg[0x90114]);
> + writel(0x168, ®s->reg[0x90115]);
> + writel(0x0, ®s->reg[0x90116]);
> + writel(0x1d8, ®s->reg[0x90117]);
> + writel(0x169, ®s->reg[0x90118]);
> + writel(0x80, ®s->reg[0x90119]);
> + writel(0x790, ®s->reg[0x9011a]);
> + writel(0x16a, ®s->reg[0x9011b]);
> + writel(0x18, ®s->reg[0x9011c]);
> + writel(0x7aa, ®s->reg[0x9011d]);
> + writel(0x6a, ®s->reg[0x9011e]);
> + writel(0xa, ®s->reg[0x9011f]);
> + writel(0x0, ®s->reg[0x90120]);
> + writel(0x1e9, ®s->reg[0x90121]);
> + writel(0x8, ®s->reg[0x90122]);
> + writel(0x8080, ®s->reg[0x90123]);
> + writel(0x108, ®s->reg[0x90124]);
> + writel(0xf, ®s->reg[0x90125]);
> + writel(0x408, ®s->reg[0x90126]);
> + writel(0x169, ®s->reg[0x90127]);
> + writel(0xc, ®s->reg[0x90128]);
> + writel(0x0, ®s->reg[0x90129]);
> + writel(0x68, ®s->reg[0x9012a]);
> + writel(0x9, ®s->reg[0x9012b]);
> + writel(0x0, ®s->reg[0x9012c]);
> + writel(0x1a9, ®s->reg[0x9012d]);
> + writel(0x0, ®s->reg[0x9012e]);
> + writel(0x408, ®s->reg[0x9012f]);
> + writel(0x169, ®s->reg[0x90130]);
> + writel(0x0, ®s->reg[0x90131]);
> + writel(0x8080, ®s->reg[0x90132]);
> + writel(0x108, ®s->reg[0x90133]);
> + writel(0x8, ®s->reg[0x90134]);
> + writel(0x7aa, ®s->reg[0x90135]);
> + writel(0x6a, ®s->reg[0x90136]);
> + writel(0x0, ®s->reg[0x90137]);
> + writel(0x8568, ®s->reg[0x90138]);
> + writel(0x108, ®s->reg[0x90139]);
> + writel(0xb7, ®s->reg[0x9013a]);
> + writel(0x790, ®s->reg[0x9013b]);
> + writel(0x16a, ®s->reg[0x9013c]);
> + writel(0x1d, ®s->reg[0x9013d]);
> + writel(0x0, ®s->reg[0x9013e]);
> + writel(0x68, ®s->reg[0x9013f]);
> + writel(0x8, ®s->reg[0x90140]);
> + writel(0x8558, ®s->reg[0x90141]);
> + writel(0x168, ®s->reg[0x90142]);
> + writel(0xf, ®s->reg[0x90143]);
> + writel(0x408, ®s->reg[0x90144]);
> + writel(0x169, ®s->reg[0x90145]);
> + writel(0xc, ®s->reg[0x90146]);
> + writel(0x0, ®s->reg[0x90147]);
> + writel(0x68, ®s->reg[0x90148]);
> + writel(0x0, ®s->reg[0x90149]);
> + writel(0x408, ®s->reg[0x9014a]);
> + writel(0x169, ®s->reg[0x9014b]);
> + writel(0x0, ®s->reg[0x9014c]);
> + writel(0x8558, ®s->reg[0x9014d]);
> + writel(0x168, ®s->reg[0x9014e]);
> + writel(0x8, ®s->reg[0x9014f]);
> + writel(0x3c8, ®s->reg[0x90150]);
> + writel(0x1a9, ®s->reg[0x90151]);
> + writel(0x3, ®s->reg[0x90152]);
> + writel(0x370, ®s->reg[0x90153]);
> + writel(0x129, ®s->reg[0x90154]);
> + writel(0x20, ®s->reg[0x90155]);
> + writel(0x2aa, ®s->reg[0x90156]);
> + writel(0x9, ®s->reg[0x90157]);
> + writel(0x0, ®s->reg[0x90158]);
> + writel(0x400, ®s->reg[0x90159]);
> + writel(0x10e, ®s->reg[0x9015a]);
> + writel(0x8, ®s->reg[0x9015b]);
> + writel(0xe8, ®s->reg[0x9015c]);
> + writel(0x109, ®s->reg[0x9015d]);
> + writel(0x0, ®s->reg[0x9015e]);
> + writel(0x8140, ®s->reg[0x9015f]);
> + writel(0x10c, ®s->reg[0x90160]);
> + writel(0x10, ®s->reg[0x90161]);
> + writel(0x8138, ®s->reg[0x90162]);
> + writel(0x10c, ®s->reg[0x90163]);
> + writel(0x8, ®s->reg[0x90164]);
> + writel(0x7c8, ®s->reg[0x90165]);
> + writel(0x101, ®s->reg[0x90166]);
> + writel(0x8, ®s->reg[0x90167]);
> + writel(0x0, ®s->reg[0x90168]);
> + writel(0x8, ®s->reg[0x90169]);
> + writel(0x8, ®s->reg[0x9016a]);
> + writel(0x448, ®s->reg[0x9016b]);
> + writel(0x109, ®s->reg[0x9016c]);
> + writel(0xf, ®s->reg[0x9016d]);
> + writel(0x7c0, ®s->reg[0x9016e]);
> + writel(0x109, ®s->reg[0x9016f]);
> + writel(0x0, ®s->reg[0x90170]);
> + writel(0xe8, ®s->reg[0x90171]);
> + writel(0x109, ®s->reg[0x90172]);
> + writel(0x47, ®s->reg[0x90173]);
> + writel(0x630, ®s->reg[0x90174]);
> + writel(0x109, ®s->reg[0x90175]);
> + writel(0x8, ®s->reg[0x90176]);
> + writel(0x618, ®s->reg[0x90177]);
> + writel(0x109, ®s->reg[0x90178]);
> + writel(0x8, ®s->reg[0x90179]);
> + writel(0xe0, ®s->reg[0x9017a]);
> + writel(0x109, ®s->reg[0x9017b]);
> + writel(0x0, ®s->reg[0x9017c]);
> + writel(0x7c8, ®s->reg[0x9017d]);
> + writel(0x109, ®s->reg[0x9017e]);
> + writel(0x8, ®s->reg[0x9017f]);
> + writel(0x8140, ®s->reg[0x90180]);
> + writel(0x10c, ®s->reg[0x90181]);
> + writel(0x0, ®s->reg[0x90182]);
> + writel(0x1, ®s->reg[0x90183]);
> + writel(0x8, ®s->reg[0x90184]);
> + writel(0x8, ®s->reg[0x90185]);
> + writel(0x4, ®s->reg[0x90186]);
> + writel(0x8, ®s->reg[0x90187]);
> + writel(0x8, ®s->reg[0x90188]);
> + writel(0x7c8, ®s->reg[0x90189]);
> + writel(0x101, ®s->reg[0x9018a]);
> + writel(0x0, ®s->reg[0x90006]);
> + writel(0x0, ®s->reg[0x90007]);
> + writel(0x8, ®s->reg[0x90008]);
> + writel(0x0, ®s->reg[0x90009]);
> + writel(0x0, ®s->reg[0x9000a]);
> + writel(0x0, ®s->reg[0x9000b]);
> + writel(0x400, ®s->reg[0xd00e7]);
> + writel(0x0, ®s->reg[0x90017]);
> + writel(0x2a, ®s->reg[0x9001f]);
> + writel(0x6a, ®s->reg[0x90026]);
> + writel(0x0, ®s->reg[0x400d0]);
> + writel(0x101, ®s->reg[0x400d1]);
> + writel(0x105, ®s->reg[0x400d2]);
> + writel(0x107, ®s->reg[0x400d3]);
> + writel(0x10f, ®s->reg[0x400d4]);
> + writel(0x202, ®s->reg[0x400d5]);
> + writel(0x20a, ®s->reg[0x400d6]);
> + writel(0x20b, ®s->reg[0x400d7]);
> + writel(0x2, ®s->reg[0x2003a]);
> + writel(0x0, ®s->reg[0x9000c]);
> + writel(0x173, ®s->reg[0x9000d]);
> + writel(0x60, ®s->reg[0x9000e]);
> + writel(0x6110, ®s->reg[0x9000f]);
> + writel(0x2152, ®s->reg[0x90010]);
> + writel(0xdfbd, ®s->reg[0x90011]);
> + writel(0x60, ®s->reg[0x90012]);
> + writel(0x6152, ®s->reg[0x90013]);
> + writel(0x5a, ®s->reg[0x20010]);
> + writel(0x3, ®s->reg[0x20011]);
> + writel(0xe0, ®s->reg[0x40080]);
> + writel(0x12, ®s->reg[0x40081]);
> + writel(0xe0, ®s->reg[0x40082]);
> + writel(0x12, ®s->reg[0x40083]);
> + writel(0xe0, ®s->reg[0x40084]);
> + writel(0x12, ®s->reg[0x40085]);
> + writel(0xf, ®s->reg[0x400fd]);
> + writel(0x1, ®s->reg[0x10011]);
> + writel(0x1, ®s->reg[0x10012]);
> + writel(0x180, ®s->reg[0x10013]);
> + writel(0x1, ®s->reg[0x10018]);
> + writel(0x6209, ®s->reg[0x10002]);
> + writel(0x1, ®s->reg[0x100b2]);
> + writel(0x1, ®s->reg[0x101b4]);
> + writel(0x1, ®s->reg[0x102b4]);
> + writel(0x1, ®s->reg[0x103b4]);
> + writel(0x1, ®s->reg[0x104b4]);
> + writel(0x1, ®s->reg[0x105b4]);
> + writel(0x1, ®s->reg[0x106b4]);
> + writel(0x1, ®s->reg[0x107b4]);
> + writel(0x1, ®s->reg[0x108b4]);
> + writel(0x1, ®s->reg[0x11011]);
> + writel(0x1, ®s->reg[0x11012]);
> + writel(0x180, ®s->reg[0x11013]);
> + writel(0x1, ®s->reg[0x11018]);
> + writel(0x6209, ®s->reg[0x11002]);
> + writel(0x1, ®s->reg[0x110b2]);
> + writel(0x1, ®s->reg[0x111b4]);
> + writel(0x1, ®s->reg[0x112b4]);
> + writel(0x1, ®s->reg[0x113b4]);
> + writel(0x1, ®s->reg[0x114b4]);
> + writel(0x1, ®s->reg[0x115b4]);
> + writel(0x1, ®s->reg[0x116b4]);
> + writel(0x1, ®s->reg[0x117b4]);
> + writel(0x1, ®s->reg[0x118b4]);
> + writel(0x1, ®s->reg[0x12011]);
> + writel(0x1, ®s->reg[0x12012]);
> + writel(0x180, ®s->reg[0x12013]);
> + writel(0x1, ®s->reg[0x12018]);
> + writel(0x6209, ®s->reg[0x12002]);
> + writel(0x1, ®s->reg[0x120b2]);
> + writel(0x1, ®s->reg[0x121b4]);
> + writel(0x1, ®s->reg[0x122b4]);
> + writel(0x1, ®s->reg[0x123b4]);
> + writel(0x1, ®s->reg[0x124b4]);
> + writel(0x1, ®s->reg[0x125b4]);
> + writel(0x1, ®s->reg[0x126b4]);
> + writel(0x1, ®s->reg[0x127b4]);
> + writel(0x1, ®s->reg[0x128b4]);
> + writel(0x1, ®s->reg[0x13011]);
> + writel(0x1, ®s->reg[0x13012]);
> + writel(0x180, ®s->reg[0x13013]);
> + writel(0x1, ®s->reg[0x13018]);
> + writel(0x6209, ®s->reg[0x13002]);
> + writel(0x1, ®s->reg[0x130b2]);
> + writel(0x1, ®s->reg[0x131b4]);
> + writel(0x1, ®s->reg[0x132b4]);
> + writel(0x1, ®s->reg[0x133b4]);
> + writel(0x1, ®s->reg[0x134b4]);
> + writel(0x1, ®s->reg[0x135b4]);
> + writel(0x1, ®s->reg[0x136b4]);
> + writel(0x1, ®s->reg[0x137b4]);
> + writel(0x1, ®s->reg[0x138b4]);
> + writel(0x2, ®s->reg[0x2003a]);
> + writel(0x2, ®s->reg[0xc0080]);
> + writel(0x1, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0x000d0000]);
> + readl(®s->reg[0x00020010]);
> + writel(0x6a, ®s->reg[0x00020010]);
> + readl(®s->reg[0x0002001d]);
> + writel(0x1, ®s->reg[0x0002001d]);
> + /*
> + * CalBusy.0 =1, indicates the calibrator is actively calibrating.
> + * Wait Calibrating done.
> + */
> + ret = readl_poll_timeout(®s->reg[0x20097], val,
> + !(val & BIT(1)), 1000);
> + if (ret)
> + puts("CalBusy.0 timeout\n");
> +
> + writel(0x0, ®s->reg[0xd0000]);
> + writel(0x0, ®s->reg[0x2006e]);
> +}
> diff --git a/board/freescale/mx8mq_evk/ddr/helper.c b/board/freescale/mx8mq_evk/ddr/helper.c
> new file mode 100644
> index 0000000000..4e87991c7b
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/ddr/helper.c
> @@ -0,0 +1,101 @@
> +/*
> + * Copyright 2017 NXP
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <spl.h>
> +#include <asm/io.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <asm/sections.h>
> +#include <asm/arch/ddr.h>
> +#include <asm/arch/sys_proto.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define IMEM_LEN 32768
> +#define DMEM_LEN 16384
> +#define IMEM_2D_OFFSET 49152
> +
> +#define IMEM_OFFSET_ADDR 0x00050000
> +#define DMEM_OFFSET_ADDR 0x00054000
> +#define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
> +
> +/* We need PHY iMEM PHY is 32KB padded */
> +void ddr_load_train_code(enum fw_type type)
> +{
> + u32 tmp32, i;
> + u32 error = 0;
> + unsigned long pr_to32, pr_from32;
> + unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0;
> + unsigned long imem_start = (unsigned long)&_end + fw_offset;
> + unsigned long dmem_start = imem_start + IMEM_LEN;
> +
> + pr_from32 = imem_start;
> + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
> + for (i = 0x0; i < IMEM_LEN; ) {
> + tmp32 = readl(pr_from32);
> + writew(tmp32 & 0x0000ffff, pr_to32);
> + pr_to32 += 4;
> + writew((tmp32 >> 16) & 0x0000ffff, pr_to32);
> + pr_to32 += 4;
> + pr_from32 += 4;
> + i += 4;
> + }
> +
> + pr_from32 = dmem_start;
> + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
> + for (i = 0x0; i < DMEM_LEN;) {
> + tmp32 = readl(pr_from32);
> + writew(tmp32 & 0x0000ffff, pr_to32);
> + pr_to32 += 4;
> + writew((tmp32 >> 16) & 0x0000ffff, pr_to32);
> + pr_to32 += 4;
> + pr_from32 += 4;
> + i += 4;
> + }
> +
> + debug("check ddr4_pmu_train_imem code\n");
> + pr_from32 = imem_start;
> + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
> + for (i = 0x0; i < IMEM_LEN;) {
> + tmp32 = (readw(pr_to32) & 0x0000ffff);
> + pr_to32 += 4;
> + tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
> +
> + if (tmp32 != readl(pr_from32)) {
> + printf("%lx %lx\n", pr_from32, pr_to32);
> + error++;
> + }
> + pr_from32 += 4;
> + pr_to32 += 4;
> + i += 4;
> + }
> + if (error)
> + printf("check ddr4_pmu_train_imem code fail=%d\n", error);
> + else
> + debug("check ddr4_pmu_train_imem code pass\n");
> +
> + debug("check ddr4_pmu_train_dmem code\n");
> + pr_from32 = dmem_start;
> + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
> + for (i = 0x0; i < DMEM_LEN;) {
> + tmp32 = (readw(pr_to32) & 0x0000ffff);
> + pr_to32 += 4;
> + tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
> + if (tmp32 != readl(pr_from32)) {
> + printf("%lx %lx\n", pr_from32, pr_to32);
> + error++;
> + }
> + pr_from32 += 4;
> + pr_to32 += 4;
> + i += 4;
> + }
> +
> + if (error)
> + printf("check ddr4_pmu_train_dmem code fail=%d", error);
> + else
> + debug("check ddr4_pmu_train_dmem code pass\n");
> +}
> diff --git a/board/freescale/mx8mq_evk/mx8mq_evk.c b/board/freescale/mx8mq_evk/mx8mq_evk.c
> new file mode 100644
> index 0000000000..e31678efb7
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/mx8mq_evk.c
> @@ -0,0 +1,156 @@
> +/*
> + * Copyright 2017 NXP
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <asm/mach-imx/iomux-v3.h>
> +#include <asm-generic/gpio.h>
> +#include <fsl_esdhc.h>
> +#include <mmc.h>
> +#include <asm/arch/mx8mq_pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/mach-imx/gpio.h>
> +#include <asm/mach-imx/mxc_i2c.h>
> +#include <asm/arch/clock.h>
> +#include <spl.h>
> +#include <power/pmic.h>
> +#include <power/pfuze100_pmic.h>
> +#include "../common/pfuze.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define QSPI_PAD_CTRL (PAD_CTL_DSE2 | PAD_CTL_HYS)
> +
> +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
> +
> +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
> +
> +static iomux_v3_cfg_t const wdog_pads[] = {
> + IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
> +};
> +
> +#ifdef CONFIG_FSL_QSPI
> +static iomux_v3_cfg_t const qspi_pads[] = {
> + IMX8MQ_PAD_NAND_ALE__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL),
> + IMX8MQ_PAD_NAND_CE0_B__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL),
> +
> + IMX8MQ_PAD_NAND_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
> + IMX8MQ_PAD_NAND_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
> + IMX8MQ_PAD_NAND_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
> + IMX8MQ_PAD_NAND_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
> +};
> +
> +int board_qspi_init(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(qspi_pads, ARRAY_SIZE(qspi_pads));
> +
> + set_clk_qspi();
> +
> + return 0;
> +}
> +#endif
> +
> +static iomux_v3_cfg_t const uart_pads[] = {
> + IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> + IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> +};
> +
> +int board_early_init_f(void)
> +{
> + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> +
> + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
> + set_wdog_reset(wdog);
> +
> + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + /* rom_pointer[1] contains the size of TEE occupies */
> + if (rom_pointer[1])
> + gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
> + else
> + gd->ram_size = PHYS_SDRAM_SIZE;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_FEC_MXC
> +#define FEC_RST_PAD IMX_GPIO_NR(1, 9)
> +static iomux_v3_cfg_t const fec1_rst_pads[] = {
> + IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static void setup_iomux_fec(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
> + ARRAY_SIZE(fec1_rst_pads));
> +
> + gpio_request(IMX_GPIO_NR(1, 9), "fec1_rst");
> + gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
> + udelay(500);
> + gpio_direction_output(IMX_GPIO_NR(1, 9), 1);
> +}
> +
> +static int setup_fec(void)
> +{
> + struct iomuxc_gpr_base_regs *gpr =
> + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
> +
> + setup_iomux_fec();
> +
> + /* Use 125M anatop REF_CLK1 for ENET1, not from external */
> + clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0);
> + return set_clk_enet(ENET_125MHZ);
> +}
> +
> +int board_phy_config(struct phy_device *phydev)
> +{
> + /* enable rgmii rxc skew and phy mode select to RGMII copper */
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
> +
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
> +
> + if (phydev->drv->config)
> + phydev->drv->config(phydev);
> + return 0;
> +}
> +#endif
> +
> +int board_init(void)
> +{
> + board_qspi_init();
> +
> +#ifdef CONFIG_FEC_MXC
> + setup_fec();
> +#endif
> +
> + return 0;
> +}
> +
> +int board_mmc_get_env_dev(int devno)
> +{
> + return devno;
> +}
> +
> +int board_late_init(void)
> +{
> +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> + env_set("board_name", "EVK");
> + env_set("board_rev", "iMX8MQ");
> +#endif
> +
> + return 0;
> +}
> diff --git a/board/freescale/mx8mq_evk/spl.c b/board/freescale/mx8mq_evk/spl.c
> new file mode 100644
> index 0000000000..3e6aa51692
> --- /dev/null
> +++ b/board/freescale/mx8mq_evk/spl.c
> @@ -0,0 +1,230 @@
> +/*
> + * Copyright 2017 NXP
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/ddr.h>
> +#include <asm/arch/mx8mq_pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch/clock.h>
> +#include <asm/mach-imx/iomux-v3.h>
> +#include <asm/mach-imx/gpio.h>
> +#include <asm/mach-imx/mxc_i2c.h>
> +#include <fsl_esdhc.h>
> +#include <mmc.h>
> +#include <power/pmic.h>
> +#include <power/pfuze100_pmic.h>
> +#include <spl.h>
> +#include "../common/pfuze.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void spl_dram_init(void)
> +{
> + /* ddr init */
> + ddr_init();
> +}
> +
> +#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
> +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
> +struct i2c_pads_info i2c_pad_info1 = {
> + .scl = {
> + .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC,
> + .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC,
> + .gp = IMX_GPIO_NR(5, 14),
> + },
> + .sda = {
> + .i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC,
> + .gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC,
> + .gp = IMX_GPIO_NR(5, 15),
> + },
> +};
> +
> +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 12)
> +#define USDHC1_PWR_GPIO IMX_GPIO_NR(2, 10)
> +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19)
> +
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> + int ret = 0;
> +
> + switch (cfg->esdhc_base) {
> + case USDHC1_BASE_ADDR:
> + ret = 1;
> + break;
> + case USDHC2_BASE_ADDR:
> + ret = !gpio_get_value(USDHC2_CD_GPIO);
> + return ret;
> + }
> +
> + return 1;
> +}
> +
> +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \
> + PAD_CTL_FSEL2)
> +
> +static iomux_v3_cfg_t const usdhc1_pads[] = {
> + IMX8MQ_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t const usdhc2_pads[] = {
> + IMX8MQ_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MQ_PAD_SD2_CD_B__GPIO2_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static struct fsl_esdhc_cfg usdhc_cfg[2] = {
> + {USDHC1_BASE_ADDR, 0, 8},
> + {USDHC2_BASE_ADDR, 0, 4},
> +};
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + int i, ret;
> + /*
> + * According to the board_mmc_init() the following map is done:
> + * (U-Boot device node) (Physical Port)
> + * mmc0 USDHC1
> + * mmc1 USDHC2
> + */
> + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
> + switch (i) {
> + case 0:
> + init_clk_usdhc(0);
> + usdhc_cfg[0].sdhc_clk = mxc_get_clock(USDHC1_CLK_ROOT);
> + imx_iomux_v3_setup_multiple_pads(
> + usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
> + gpio_request(USDHC1_PWR_GPIO, "usdhc1_reset");
> + gpio_direction_output(USDHC1_PWR_GPIO, 0);
> + udelay(500);
> + gpio_direction_output(USDHC1_PWR_GPIO, 1);
> + break;
> + case 1:
> + init_clk_usdhc(1);
> + usdhc_cfg[1].sdhc_clk = mxc_get_clock(USDHC2_CLK_ROOT);
> + imx_iomux_v3_setup_multiple_pads(
> + usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
> + gpio_request(USDHC2_PWR_GPIO, "usdhc2_reset");
> + gpio_direction_output(USDHC2_PWR_GPIO, 0);
> + udelay(500);
> + gpio_direction_output(USDHC2_PWR_GPIO, 1);
> + break;
> + default:
> + printf("Warning: you configured more USDHC controllers(%d) than supported by the board\n", i + 1);
> + return -EINVAL;
> + }
> +
> + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_POWER
> +#define I2C_PMIC 0
> +int power_init_board(void)
> +{
> + struct pmic *p;
> + int ret;
> + unsigned int reg;
> +
> + ret = power_pfuze100_init(I2C_PMIC);
> + if (ret)
> + return -ENODEV;
> +
> + p = pmic_get("PFUZE100");
> + ret = pmic_probe(p);
> + if (ret)
> + return -ENODEV;
> +
> + pmic_reg_read(p, PFUZE100_DEVICEID, ®);
> + printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
> +
> + pmic_reg_read(p, PFUZE100_SW3AVOL, ®);
> + if ((reg & 0x3f) != 0x18) {
> + reg &= ~0x3f;
> + reg |= 0x18;
> + pmic_reg_write(p, PFUZE100_SW3AVOL, reg);
> + }
> +
> + ret = pfuze_mode_init(p, APS_PFM);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +#endif
> +
> +void spl_board_init(void)
> +{
> + enable_tzc380();
> +
> + /* Adjust pmic voltage to 1.0V for 800M */
> + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
> +
> + power_init_board();
> +
> + /* DDR initialization */
> + spl_dram_init();
> +
> + /* Serial download mode */
> + if (is_usb_boot()) {
> + puts("Back to ROM, SDP\n");
> + restore_boot_params();
> + }
> + puts("Normal Boot\n");
> +}
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name)
> +{
> + /* Just empty function now - can't decide what to choose */
> + debug("%s: %s\n", __func__, name);
> +
> + return 0;
> +}
> +#endif
> +
> +void board_init_f(ulong dummy)
> +{
> + /* Clear global data */
> + memset((void *)gd, 0, sizeof(gd_t));
> +
> + arch_cpu_init();
> +
> + init_uart_clk(0);
> +
> + board_early_init_f();
> +
> + timer_init();
> +
> + preloader_console_init();
> +
> + /* Clear the BSS. */
> + memset(__bss_start, 0, __bss_end - __bss_start);
> +
> + board_init_r(NULL, 0);
> +}
> diff --git a/configs/mx8mq_evk_defconfig b/configs/mx8mq_evk_defconfig
> new file mode 100644
> index 0000000000..5848168ac3
> --- /dev/null
> +++ b/configs/mx8mq_evk_defconfig
> @@ -0,0 +1,27 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MX8M=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_TARGET_MX8MQ_EVK=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mq-evk"
> +CONFIG_FIT=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> +CONFIG_SPL=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_DM_MMC=y
> +CONFIG_DM_ETH=y
> +CONFIG_PINCTRL=y
> +CONFIG_DM_PMIC_PFUZE100=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_PFUZE100=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_FS_FAT=y
> diff --git a/include/configs/mx8mq_evk.h b/include/configs/mx8mq_evk.h
> new file mode 100644
> index 0000000000..6fb8669bbe
> --- /dev/null
> +++ b/include/configs/mx8mq_evk.h
> @@ -0,0 +1,269 @@
> +/*
> + * Copyright 2017 NXP
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __IMX8M_EVK_H
> +#define __IMX8M_EVK_H
> +
> +#include <linux/sizes.h>
> +#include <asm/arch/imx-regs.h>
> +
> +#ifdef CONFIG_SECURE_BOOT
> +#define CONFIG_CSF_SIZE 0x2000 /* 8K region */
> +#endif
> +
> +#define CONFIG_SPL_FRAMEWORK
> +#define CONFIG_SPL_TEXT_BASE 0x7E1000
> +#define CONFIG_SPL_MAX_SIZE (124 * 1024)
> +#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
> +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
> +
> +#ifdef CONFIG_SPL_BUILD
> +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
> +#define CONFIG_SPL_WATCHDOG_SUPPORT
> +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
> +#define CONFIG_SPL_POWER_SUPPORT
> +#define CONFIG_SPL_I2C_SUPPORT
> +#define CONFIG_SPL_BOARD_INIT
> +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
> +#define CONFIG_SPL_STACK 0x187FF0
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +#define CONFIG_SPL_SERIAL_SUPPORT
> +#define CONFIG_SPL_GPIO_SUPPORT
> +#define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_BSS_START_ADDR 0x00180000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
> +#define CONFIG_SYS_SPL_MALLOC_START 0x00182000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x2000 /* 8 KB */
> +#define CONFIG_SYS_ICACHE_OFF
> +#define CONFIG_SYS_DCACHE_OFF
> +
> +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
> +
> +#undef CONFIG_DM_MMC
> +#undef CONFIG_DM_PMIC
> +#undef CONFIG_DM_PMIC_PFUZE100
> +
> +#define CONFIG_SYS_I2C
> +#define CONFIG_SYS_I2C_MXC
> +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
> +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
> +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
> +
> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +
> +#define CONFIG_POWER
> +#define CONFIG_POWER_I2C
> +#define CONFIG_POWER_PFUZE100
> +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
> +#endif
> +
> +#define CONFIG_REMAKE_ELF
> +
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_BOARD_LATE_INIT
> +
> +#undef CONFIG_CMD_EXPORTENV
> +#undef CONFIG_CMD_IMPORTENV
> +#undef CONFIG_CMD_IMLS
> +
> +#undef CONFIG_CMD_CRC32
> +#undef CONFIG_BOOTM_NETBSD
> +
> +/* ENET Config */
> +/* ENET1 */
> +#if defined(CONFIG_CMD_NET)
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_MII
> +#define CONFIG_MII
> +#define CONFIG_ETHPRIME "FEC"
> +
> +#define CONFIG_FEC_MXC
> +#define CONFIG_FEC_XCV_TYPE RGMII
> +#define CONFIG_FEC_MXC_PHYADDR 0
> +#define FEC_QUIRK_ENET_MAC
> +
> +#define CONFIG_PHY_GIGE
> +#define IMX_FEC_BASE 0x30BE0000
> +
> +#define CONFIG_PHYLIB
> +#define CONFIG_PHY_ATHEROS
> +#endif
> +
> +#define CONFIG_MFG_ENV_SETTINGS \
> + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
> + "rdinit=/linuxrc " \
> + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
> + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
> + "g_mass_storage.iSerialNumber=\"\" "\
> + "clk_ignore_unused "\
> + "\0" \
> + "initrd_addr=0x43800000\0" \
> + "initrd_high=0xffffffff\0" \
> + "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
> +/* Initial environment variables */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + CONFIG_MFG_ENV_SETTINGS \
> + "script=boot.scr\0" \
> + "image=Image\0" \
> + "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \
> + "fdt_addr=0x43000000\0" \
> + "fdt_high=0xffffffffffffffff\0" \
> + "boot_fdt=try\0" \
> + "fdt_file=fsl-imx8mq-evk.dtb\0" \
> + "initrd_addr=0x43800000\0" \
> + "initrd_high=0xffffffffffffffff\0" \
> + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
> + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcautodetect=yes\0" \
> + "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
> + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> + "bootscript=echo Running bootscript from mmc ...; " \
> + "source\0" \
> + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "run mmcargs; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> + "if run loadfdt; then " \
> + "booti ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "else " \
> + "echo wait for boot; " \
> + "fi;\0" \
> + "netargs=setenv bootargs console=${console} " \
> + "root=/dev/nfs " \
> + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> + "netboot=echo Booting from net ...; " \
> + "run netargs; " \
> + "if test ${ip_dyn} = yes; then " \
> + "setenv get_cmd dhcp; " \
> + "else " \
> + "setenv get_cmd tftp; " \
> + "fi; " \
> + "${get_cmd} ${loadaddr} ${image}; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
> + "booti ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "else " \
> + "booti; " \
> + "fi;\0"
> +
> +#define CONFIG_BOOTCOMMAND \
> + "mmc dev ${mmcdev}; if mmc rescan; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loadimage; then " \
> + "run mmcboot; " \
> + "else run netboot; " \
> + "fi; " \
> + "fi; " \
> + "else booti ${loadaddr} - ${fdt_addr}; fi"
> +
> +/* Link Definitions */
> +#define CONFIG_LOADADDR 0x40480000
> +#define CONFIG_SYS_TEXT_BASE 0x40200000
> +
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
> +#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_ENV_OFFSET (64 * SZ_64K)
> +#define CONFIG_ENV_SIZE 0x1000
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
> +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x40000000
> +#define PHYS_SDRAM 0x40000000
> +#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
> +#define CONFIG_NR_DRAM_BANKS 1
> +
> +#define CONFIG_BAUDRATE 115200
> +
> +#define CONFIG_MXC_UART
> +#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
> +
> +/* Monitor Command Prompt */
> +#undef CONFIG_SYS_PROMPT
> +#define CONFIG_SYS_PROMPT "u-boot=> "
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_CBSIZE 1024
> +#define CONFIG_SYS_MAXARGS 64
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_CMDLINE_EDITING
> +
> +#define CONFIG_IMX_BOOTAUX
> +
> +#define CONFIG_CMD_MMC
> +#define CONFIG_FSL_ESDHC
> +#define CONFIG_FSL_USDHC
> +
> +#define CONFIG_SYS_FSL_USDHC_NUM 2
> +#define CONFIG_SYS_FSL_ESDHC_ADDR 0
> +
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
> +#define CONFIG_CMD_FAT
> +
> +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
> +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
> +
> +#define CONFIG_FSL_QSPI /* enable the QUADSPI driver */
> +#ifdef CONFIG_FSL_QSPI
> +#define CONFIG_CMD_SF
> +#define CONFIG_SPI_FLASH
> +#define CONFIG_SPI_FLASH_STMICRO
> +#define CONFIG_SPI_FLASH_BAR
> +#define CONFIG_SF_DEFAULT_BUS 0
> +#define CONFIG_SF_DEFAULT_CS 0
> +#define CONFIG_SF_DEFAULT_SPEED 40000000
> +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
> +
> +#define FSL_QSPI_FLASH_SIZE (SZ_32M)
> +#define FSL_QSPI_FLASH_NUM 1
> +#endif
> +
> +#define CONFIG_MXC_GPIO
> +
> +#define CONFIG_MXC_OCOTP
> +#define CONFIG_CMD_FUSE
> +
> +/* I2C Configs */
> +#define CONFIG_SYS_I2C_SPEED 100000
> +
> +#define CONFIG_OF_SYSTEM_SETUP
> +
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_DM_PMIC
> +#endif
> +
> +#endif
--
Developer of free digital technology and hardware support.
Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
More information about the U-Boot
mailing list