[U-Boot] [PATCH] video: mxsfb: Support data-enable and pixclock polarity

[Michael Trimarchi]

Add extra feature to support data-enable and clock-polarity

Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
---
 drivers/video/mxsfb.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 02fde05..4e3e3d7 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -20,6 +20,9 @@
 
 #define	PS2KHZ(ps)	(1000000000UL / (ps))
 
+#define FB_SYNC_DATA_ENABLE_HIGH_ACT	0x80000000
+#define FB_SYNC_DOTCLK_FALLING_ACT	0x40000000
+
 static GraphicDevice panel;
 struct mxs_dma_desc desc;
 
@@ -50,7 +53,7 @@ static void mxs_lcd_init(GraphicDevice *panel,
 			struct ctfb_res_modes *mode, int bpp)
 {
 	struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
-	uint32_t word_len = 0, bus_width = 0;
+	uint32_t word_len = 0, bus_width = 0, flags = 0;
 	uint8_t valid_data = 0;
 
 	/* Kick in the LCDIF clock */
@@ -94,10 +97,22 @@ static void mxs_lcd_init(GraphicDevice *panel,
 	writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres,
 		&regs->hw_lcdif_transfer_count);
 
-	writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL |
+	if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
+		flags |= LCDIF_VDCTRL0_VSYNC_POL;
+
+	if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
+		flags |= LCDIF_VDCTRL0_HSYNC_POL;
+
+	if (mode->sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
+		flags |= LCDIF_VDCTRL0_ENABLE_POL;
+
+	if (mode->sync & FB_SYNC_DOTCLK_FALLING_ACT)
+		flags |= LCDIF_VDCTRL0_DOTCLK_POL;
+
+	writel(LCDIF_VDCTRL0_ENABLE_PRESENT |
 		LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT |
 		LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
-		mode->vsync_len, &regs->hw_lcdif_vdctrl0);
+		mode->vsync_len | flags, &regs->hw_lcdif_vdctrl0);
 	writel(mode->upper_margin + mode->lower_margin +
 		mode->vsync_len + mode->yres,
 		&regs->hw_lcdif_vdctrl1);
-- 
2.7.4