[U-Boot] [PATCH v2 6/9] mtd: nand: mxs_nand: add device tree support

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Support driver data from device tree. Also support fsl,use-minimal-ecc
similar to Linux' GPMI NAND driver.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

Changes in v2: None

 drivers/mtd/nand/Kconfig       |  7 +++
 drivers/mtd/nand/Makefile      |  1 +
 drivers/mtd/nand/mxs_nand.c    |  5 ++
 drivers/mtd/nand/mxs_nand_dt.c | 86 ++++++++++++++++++++++++++++++++++
 4 files changed, 99 insertions(+)
 create mode 100644 drivers/mtd/nand/mxs_nand_dt.c

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c039b9cc60..bdc272142e 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -154,6 +154,13 @@ config NAND_MXS
 
 if NAND_MXS
 
+config NAND_MXS_DT
+	bool "Support MXS NAND controller as a DT device"
+	depends on OF_CONTROL && MTD
+	help
+	  Enable the driver for MXS NAND flash on platforms using
+	  device tree.
+
 config NAND_MXS_USE_MINIMUM_ECC
 	bool "Use minimum ECC strength supported by the controller"
 	default false
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index e20ef07773..e00cbca0a9 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
 obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand.o
 obj-$(CONFIG_NAND_MXS) += mxs_nand.o
+obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o
 obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 8748c927c6..99f392ef5c 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -1201,6 +1201,9 @@ int mxs_nand_init_ctrl(struct mxs_nand_info *nand_info)
 	nand_set_controller_data(nand, nand_info);
 	nand->options |= NAND_NO_SUBPAGE_WRITE;
 
+	if (nand_info->dev)
+		nand->flash_node = dev_of_offset(nand_info->dev);
+
 	nand->cmd_ctrl		= mxs_nand_cmd_ctrl;
 
 	nand->dev_ready		= mxs_nand_device_ready;
@@ -1247,6 +1250,7 @@ err_free_buffers:
 	return err;
 }
 
+#ifndef CONFIG_NAND_MXS_DT
 void board_nand_init(void)
 {
 	struct mxs_nand_info *nand_info;
@@ -1279,3 +1283,4 @@ void board_nand_init(void)
 err:
 	free(nand_info);
 }
+#endif
diff --git a/drivers/mtd/nand/mxs_nand_dt.c b/drivers/mtd/nand/mxs_nand_dt.c
new file mode 100644
index 0000000000..f89eb091a9
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand_dt.c
@@ -0,0 +1,86 @@
+/*
+ * NXP GPMI NAND flash driver (DT initialization)
+ *
+ * Copyright (C) 2018 Toradex
+ * Authors:
+ * Stefan Agner <stefan.agner at toradex.com>
+ *
+ * Based on denali_dt.c
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dm.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/printk.h>
+
+#include "mxs_nand.h"
+
+struct mxs_nand_dt_data {
+	unsigned int max_ecc_strength_supported;
+};
+
+static const struct mxs_nand_dt_data mxs_nand_imx7d_data = {
+	.max_ecc_strength_supported = 62,
+};
+
+static const struct udevice_id mxs_nand_dt_ids[] = {
+	{
+		.compatible = "fsl,imx7d-gpmi-nand",
+		.data = (unsigned long)&mxs_nand_imx7d_data,
+	},
+	{ /* sentinel */ }
+};
+
+static int mxs_nand_dt_probe(struct udevice *dev)
+{
+	struct mxs_nand_info *info = dev_get_priv(dev);
+	const struct mxs_nand_dt_data *data;
+	struct resource res;
+	int ret;
+
+	data = (void *)dev_get_driver_data(dev);
+	if (data)
+		info->max_ecc_strength_supported = data->max_ecc_strength_supported;
+
+	info->dev = dev;
+
+	ret = dev_read_resource_byname(dev, "gpmi-nand", &res);
+	if (ret)
+		return ret;
+
+	info->gpmi_regs = devm_ioremap(dev, res.start, resource_size(&res));
+
+
+	ret = dev_read_resource_byname(dev, "bch", &res);
+	if (ret)
+		return ret;
+
+	info->bch_regs = devm_ioremap(dev, res.start, resource_size(&res));
+
+	info->use_minimum_ecc = dev_read_bool(dev, "fsl,use-minimum-ecc");
+
+	return mxs_nand_init_ctrl(info);
+}
+
+U_BOOT_DRIVER(mxs_nand_dt) = {
+	.name = "mxs-nand-dt",
+	.id = UCLASS_MTD,
+	.of_match = mxs_nand_dt_ids,
+	.probe = mxs_nand_dt_probe,
+	.priv_auto_alloc_size = sizeof(struct mxs_nand_info),
+};
+
+void board_nand_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+					  DM_GET_DRIVER(mxs_nand_dt),
+					  &dev);
+	if (ret && ret != -ENODEV)
+		pr_err("Failed to initialize MXS NAND controller. (error %d)\n",
+		       ret);
+}
-- 
2.17.1