[U-Boot] [linux-sunxi] [PATCH 00/13] Allwinner H6 support (w/ SPL)

[Icenowy Zheng]

于 2018年6月25日 GMT+08:00 下午8:40:21, Jagan Teki <jagan at amarulasolutions.com> 写到:
>On Mon, Jun 25, 2018 at 4:07 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
>> This patch trys to add support for Allwinner H6 SoC to U-Boot.
>>
>> Allwinner H6 is a quite new Allwinner SoC, with several parts changed
>a
>> lot (memory map, DRAM controller, CCU, so on). The position which SPL
>> will be loaded (SRAM A1) also changed to 0x20000.
>>
>> The Pine H64 board support comes with this patchset, as this is the
>> first H6 board that I can get (being early bird).
>>
>> Icenowy Zheng (13):
>>   sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS
>>   sunxi: add basical memory map definitions of H6 SoC
>>   sunxi: change RMR64's RVBAR address for H6
>>   sunxi: change ATF position for H6
>>   sunxi: add config for SPL at 0x20000 on H6
>>   sunxi: change GIC address on H6
>>   sunxi: add clock code for H6
>>   sunxi: use sun6i-style watchdog for H6
>>   sunxi: add UART0 setup for H6
>>   sunxi: add MMC support for H6
>>   sunxi: add DRAM support to H6
>>   sunxi: add support for Allwinner H6 SoC
>>   sunxi: add support for Pine H64 board
>
>is it on top of master? unable to apply for testing on master, point
>me the branch would help.

sunxi/next.