[U-Boot] [u-boot-release] [PATCH] configs: Disable 4k erase sector size for spansion "s25fs512s" flash

[York Sun]

On 06/25/2018 03:31 AM, Ashish Kumar wrote:
> 4K erase size is used only in case of hydrid mode which is not
> supported on any NXP platform with flash "s25fs512s".
> Supported mode is uniform sector, with erase size 256kiB.
> 
> Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
> ---
>  configs/ls1046aqds_qspi_defconfig                    | 1 +
>  configs/ls1046aqds_sdcard_qspi_defconfig             | 1 +
>  configs/ls1046ardb_qspi_SECURE_BOOT_defconfig        | 1 +
>  configs/ls1046ardb_qspi_defconfig                    | 1 +
>  configs/ls1088aqds_qspi_SECURE_BOOT_defconfig        | 1 +
>  configs/ls1088aqds_qspi_defconfig                    | 1 +
>  configs/ls1088aqds_sdcard_qspi_defconfig             | 1 +
>  configs/ls1088ardb_qspi_SECURE_BOOT_defconfig        | 1 +
>  configs/ls1088ardb_qspi_defconfig                    | 1 +
>  configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 +
>  configs/ls1088ardb_sdcard_qspi_defconfig             | 1 +
>  configs/ls2080aqds_qspi_defconfig                    | 1 +
>  configs/ls2088ardb_qspi_SECURE_BOOT_defconfig        | 1 +
>  configs/ls2088ardb_qspi_defconfig                    | 1 +
>  14 files changed, 14 insertions(+)
> 
> diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
> index 4f3290c..a770039 100644
> --- a/configs/ls1046aqds_qspi_defconfig
> +++ b/configs/ls1046aqds_qspi_defconfig
> @@ -41,6 +41,7 @@ CONFIG_SPI=y
>  CONFIG_DM_SPI=y
>  CONFIG_FSL_DSPI=y
>  CONFIG_FSL_QSPI=y
> +CONFIG_SPI_FLASH_USE_4K_SECTORS=n

Ashish,

Did you get the defconfig by "savedefconfig"? I think the correct setting is

# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

York