[U-Boot] [linux-sunxi] [PATCH 05/13] sunxi: add config for SPL at 0x20000 on H6

[Andre Przywara]

Hi,

On 25/06/18 11:37, Icenowy Zheng wrote:
> On the new Allwinner H6 SoC, the SRAM A2 address (SPL load address) is
> at 0x20000, which is different with any old Allwinner SoCs.
> 
> Add SPL position and size configuration for this.
> 
> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
>  include/configs/sunxi-common.h | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 0196dd0431..9e1c5fb2a6 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -200,6 +200,11 @@
>  #else
>  #define LOW_LEVEL_SRAM_STACK		0x00018000
>  #endif /* !CONFIG_ARM64 */
> +#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
> +#define CONFIG_SPL_TEXT_BASE		0x20060		/* sram start+header */
> +#define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */
> +/* end of SRAM A2 on H6 for now */
> +#define LOW_LEVEL_SRAM_STACK		0x00118000
>  #else
>  #define CONFIG_SPL_TEXT_BASE		0x60		/* sram start+header */
>  #define CONFIG_SPL_MAX_SIZE		0x5fa0		/* 24KB on sun4i/sun7i */
>