[U-Boot] [PATCH v5 2/2] zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards

[Michal Simek]

On 26.6.2018 11:37, Siva Durga Prasad Paladugu wrote:
> This patch adds qspi driver support for all ZynqMP ZCU102
> boards.
> 
> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
> ---
> Changes for v5:
> - None
> 
> Changes for v4:
> - None
> 
> Changes for v3:
> - Changed as per latest changes in 1/2
> 
> Changes for v2:
> - Rebased on top of latest master and enabled qspi for
>   all zcu102 boards.
> ---
>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 5 +++++
>  configs/xilinx_zynqmp_zcu102_revA_defconfig   | 5 +++++
>  configs/xilinx_zynqmp_zcu102_revB_defconfig   | 5 +++++
>  3 files changed, 15 insertions(+)
> 
> diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
> index 49a14d8..da53aa4 100644
> --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
> +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
> @@ -36,6 +36,7 @@ CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_SDRAM=y
> +CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
>  CONFIG_CMD_TFTPPUT=y
>  CONFIG_CMD_TIME=y
> @@ -69,6 +70,7 @@ CONFIG_MMC_IO_VOLTAGE=y
>  CONFIG_MMC_UHS_SUPPORT=y
>  CONFIG_MMC_SDHCI=y
>  CONFIG_MMC_SDHCI_ZYNQ=y
> +CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH=y
>  CONFIG_SPI_FLASH_BAR=y
>  CONFIG_SPI_FLASH_MACRONIX=y
> @@ -90,6 +92,9 @@ CONFIG_DM_SCSI=y
>  CONFIG_DEBUG_UART_ZYNQ=y
>  CONFIG_DEBUG_UART_ANNOUNCE=y
>  CONFIG_ZYNQ_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_ZYNQMP_GQSPI=y
>  CONFIG_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
> diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
> index 05dad41..60e1269 100644
> --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
> +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
> @@ -35,6 +35,7 @@ CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_SDRAM=y
> +CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
>  CONFIG_CMD_TFTPPUT=y
>  CONFIG_CMD_TIME=y
> @@ -66,6 +67,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
>  CONFIG_DM_MMC=y
>  CONFIG_MMC_SDHCI=y
>  CONFIG_MMC_SDHCI_ZYNQ=y
> +CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH=y
>  CONFIG_SPI_FLASH_BAR=y
>  CONFIG_SPI_FLASH_MACRONIX=y
> @@ -87,6 +89,9 @@ CONFIG_DM_SCSI=y
>  CONFIG_DEBUG_UART_ZYNQ=y
>  CONFIG_DEBUG_UART_ANNOUNCE=y
>  CONFIG_ZYNQ_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_ZYNQMP_GQSPI=y
>  CONFIG_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
> diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
> index b3711b4..fa2804d 100644
> --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
> +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
> @@ -35,6 +35,7 @@ CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_SDRAM=y
> +CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
>  CONFIG_CMD_TFTPPUT=y
>  CONFIG_CMD_TIME=y
> @@ -66,6 +67,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
>  CONFIG_DM_MMC=y
>  CONFIG_MMC_SDHCI=y
>  CONFIG_MMC_SDHCI_ZYNQ=y
> +CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH=y
>  CONFIG_SPI_FLASH_BAR=y
>  CONFIG_SPI_FLASH_MACRONIX=y
> @@ -87,6 +89,9 @@ CONFIG_DM_SCSI=y
>  CONFIG_DEBUG_UART_ZYNQ=y
>  CONFIG_DEBUG_UART_ANNOUNCE=y
>  CONFIG_ZYNQ_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_ZYNQMP_GQSPI=y
>  CONFIG_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
> 

Acked-by: Michal Simek <michal.simek at xilinx.com>

Thanks,
Michal