[U-Boot] [PATCH 1/6] board: ge: Remove EEPROM bus param from read_vpd()

[Sebastian Reichel]

From: Denis Zalevskiy <denis.zalevskiy at ge.com>

The bus is statically defined, so remove redundant parameters from read_vpd()
for PPD and Bx50v3.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy at ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.co.uk>
---
 board/ge/bx50v3/bx50v3.c   | 6 +++---
 board/ge/mx53ppd/mx53ppd.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 33f7ee6e3be5..60d600c50c8b 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -624,14 +624,14 @@ static void process_vpd(struct vpd_cache *vpd)
 		eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
 }
 
-static int read_vpd(uint eeprom_bus)
+static int read_vpd()
 {
 	int res;
 	int size = 1024;
 	uint8_t *data;
 	unsigned int current_i2c_bus = i2c_get_bus_num();
 
-	res = i2c_set_bus_num(eeprom_bus);
+	res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
 	if (res < 0)
 		return res;
 
@@ -715,7 +715,7 @@ int board_init(void)
 	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
 	setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
 
-	read_vpd(CONFIG_SYS_I2C_EEPROM_BUS);
+	read_vpd();
 
 	set_confidx(&vpd);
 
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 0010998d66cf..317d7f69d5a1 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -329,7 +329,7 @@ static void process_vpd(struct vpd_cache *vpd)
 		eth_env_set_enetaddr("ethaddr", vpd->mac1);
 }
 
-static int read_vpd(uint eeprom_bus)
+static int read_vpd()
 {
 	struct vpd_cache vpd;
 	int res;
@@ -337,7 +337,7 @@ static int read_vpd(uint eeprom_bus)
 	u8 *data;
 	unsigned int current_i2c_bus = i2c_get_bus_num();
 
-	res = i2c_set_bus_num(eeprom_bus);
+	res = i2c_set_bus_num(VPD_EEPROM_BUS);
 	if (res < 0)
 		return res;
 
@@ -391,7 +391,7 @@ int board_late_init(void)
 {
 	int res;
 
-	read_vpd(VPD_EEPROM_BUS);
+	read_vpd();
 
 	res = clock_1GHz();
 	if (res != 0)
-- 
2.18.0