[U-Boot] [UBOOT PATCH] clk: zynqmp: Fixed the same if/else part error reported by coverity

[Michal Simek]

On 27.6.2018 07:14, Vipul Kumar wrote:
> This patch fixed the same if/else part error by adding the required
> source select on the basis of is_pre_src check.
> 
> Signed-off-by: Vipul Kumar <vipul.kumar at xilinx.com>
> ---
>  drivers/clk/clk_zynqmp.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c
> index a9e4500..167f3f7 100644
> --- a/drivers/clk/clk_zynqmp.c
> +++ b/drivers/clk/clk_zynqmp.c
> @@ -103,6 +103,8 @@ static const resource_size_t zynqmp_crl_apb_clkc_base = 0xff5e0020;
>  #define PLLCTRL_BYPASS_SHFT	3
>  #define PLLCTRL_POST_SRC_SHFT	24
>  #define PLLCTRL_POST_SRC_MASK	(0x7 << PLLCTRL_POST_SRC_SHFT)
> +#define PLLCTRL_PRE_SRC_SHFT	20
> +#define PLLCTRL_PRE_SRC_MASK	(0x7 << PLLCTRL_PRE_SRC_SHFT)
>  
>  
>  #define NUM_MIO_PINS	77
> @@ -310,8 +312,8 @@ static ulong zynqmp_clk_get_pll_src(ulong clk_ctrl,
>  	u32 src_sel;
>  
>  	if (is_pre_src)
> -		src_sel = (clk_ctrl & PLLCTRL_POST_SRC_MASK) >>
> -			   PLLCTRL_POST_SRC_SHFT;
> +		src_sel = (clk_ctrl & PLLCTRL_PRE_SRC_MASK) >>
> +			   PLLCTRL_PRE_SRC_SHFT;
>  	else
>  		src_sel = (clk_ctrl & PLLCTRL_POST_SRC_MASK) >>
>  			   PLLCTRL_POST_SRC_SHFT;
> 

Applied.

Thanks,
Michal