[U-Boot] [linux-sunxi] [PATCH 12/13] sunxi: add support for Allwinner H6 SoC
Andre Przywara
andre.przywara at arm.com
Wed Jun 27 14:04:53 UTC 2018
Hi,
On 25/06/18 11:37, Icenowy Zheng wrote:
> Allwinner H6 is a new SoC from Allwinner features USB3 and PCIe
> interfaces.
>
> This patch adds support for it.
Can you please mention in the commit message or subject line that this
includes the SoC .dtsi? Or maybe even split this out into a separate patch?
And is there any reason you didn't copy the official Linux DT version?
Or is that one here just an older copy of that?
Anyway, please use the most recent version of the .dtsi, so we can use
that directly to pass on to the kernel.
Thanks!
Andre.
> As this is a new SoC supported by mainline U-Boot, the MMC env support
> is dropped and only FAT env is available.
>
> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> ---
> arch/arm/dts/sun50i-h6.dtsi | 140 +++++++++++++++++++++++++++++++++
> arch/arm/mach-sunxi/Kconfig | 17 +++-
> arch/arm/mach-sunxi/cpu_info.c | 2 +
> common/spl/Kconfig | 2 +-
> 4 files changed, 159 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-h6.dtsi
>
> diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
> new file mode 100644
> index 0000000000..50f9146318
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h6.dtsi
> @@ -0,0 +1,140 @@
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <0>;
> + };
> +
> + cpu1: cpu at 1 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <1>;
> + };
> +
> + cpu2: cpu at 2 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <2>;
> + };
> +
> + cpu3: cpu at 3 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <3>;
> + };
> + };
> +
> + osc24M: osc24M_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "osc24M";
> + };
> +
> + osc32k: osc32k_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> +
> + iosc: internal-osc-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <16000000>;
> + clock-accuracy = <300000000>;
> + clock-output-names = "iosc";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gic: interrupt-controller at 3021000 {
> + compatible = "arm,gic-400";
> + reg = <0x03021000 0x1000>,
> + <0x03022000 0x2000>,
> + <0x03024000 0x2000>,
> + <0x03026000 0x2000>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + };
> +
> + uart0: serial at 5000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x05000000 0x400>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&osc24M>; /* placeholder */
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index c2fa0533e7..cb4a9af6bf 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -82,6 +82,7 @@ config SUN8I_RSB
> config SUNXI_SRAM_ADDRESS
> hex
> default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
> + default 0x20000 if MACH_SUN50I_H6
> default 0x0
> ---help---
> Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
> @@ -281,6 +282,14 @@ config MACH_SUN50I_H5
> select FIT
> select SPL_LOAD_FIT
>
> +config MACH_SUN50I_H6
> + bool "sun50i (Allwinner H6)"
> + select ARM64
> + select SUPPORT_SPL
> + select FIT
> + select SPL_LOAD_FIT
> + select DRAM_SUN50I_H6
> +
> endchoice
>
> # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
> @@ -374,6 +383,7 @@ config DRAM_CLK
> default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \
> MACH_SUN8I_V3S
> default 672 if MACH_SUN50I
> + default 744 if MACH_SUN50I_H6
> ---help---
> Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
> must be a multiple of 24. For the sun9i (A80), the tested values
> @@ -393,7 +403,7 @@ config DRAM_ZQ
> default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
> default 127 if MACH_SUN7I
> default 14779 if MACH_SUN8I_V3S
> - default 3881979 if MACH_SUN8I_R40
> + default 3881979 if MACH_SUN8I_R40 || MACH_SUN50I_H6
> default 4145117 if MACH_SUN9I
> default 3881915 if MACH_SUN50I
> ---help---
> @@ -405,6 +415,7 @@ config DRAM_ODT_EN
> default y if MACH_SUN8I_A23
> default y if MACH_SUN8I_R40
> default y if MACH_SUN50I
> + default y if MACH_SUN50I_H6
> ---help---
> Select this to enable dram odt (on die termination).
>
> @@ -495,6 +506,7 @@ config SYS_CLK_FREQ
> default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
> default 1008000000 if MACH_SUN8I
> default 1008000000 if MACH_SUN9I
> + default 888000000 if MACH_SUN50I_H6
>
> config SYS_CONFIG_NAME
> default "sun4i" if MACH_SUN4I
> @@ -504,6 +516,7 @@ config SYS_CONFIG_NAME
> default "sun8i" if MACH_SUN8I
> default "sun9i" if MACH_SUN9I
> default "sun50i" if MACH_SUN50I
> + default "sun50i" if MACH_SUN50I_H6
>
> config SYS_BOARD
> default "sunxi"
> @@ -709,6 +722,7 @@ config VIDEO_SUNXI
> depends on !MACH_SUN8I_V3S
> depends on !MACH_SUN9I
> depends on !MACH_SUN50I
> + depends on !MACH_SUN50I_H6
> select VIDEO
> imply VIDEO_DT_SIMPLEFB
> default y
> @@ -941,6 +955,7 @@ config SPL_STACK_R_ADDR
> default 0x4fe00000 if MACH_SUN8I
> default 0x2fe00000 if MACH_SUN9I
> default 0x4fe00000 if MACH_SUN50I
> + default 0x4fe00000 if MACH_SUN50I_H6
>
> config SPL_SPI_SUNXI
> bool "Support for SPI Flash on Allwinner SoCs in SPL"
> diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
> index 25a5ec26a0..90aff395dc 100644
> --- a/arch/arm/mach-sunxi/cpu_info.c
> +++ b/arch/arm/mach-sunxi/cpu_info.c
> @@ -97,6 +97,8 @@ int print_cpuinfo(void)
> puts("CPU: Allwinner A64 (SUN50I)\n");
> #elif defined CONFIG_MACH_SUN50I_H5
> puts("CPU: Allwinner H5 (SUN50I)\n");
> +#elif defined CONFIG_MACH_SUN50I_H6
> + puts("CPU: Allwinner H6 (SUN50I)\n");
> #else
> #warning Please update cpu_info.c with correct CPU information
> puts("CPU: SUNXI Family\n");
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 4d27565566..e761bda6f1 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -246,7 +246,7 @@ config SPL_SHA256_SUPPORT
> config SPL_FIT_IMAGE_TINY
> bool "Remove functionality from SPL FIT loading to reduce size"
> depends on SPL_FIT
> - default y if MACH_SUN50I || MACH_SUN50I_H5
> + default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
> help
> Enable this to reduce the size of the FIT image loading code
> in SPL, if space for the SPL binary is very tight.
>
More information about the U-Boot
mailing list