[U-Boot] Support of device-tree for PowerPC platform: Query

[Simon Glass]

Hi,

On 27 June 2018 at 08:06, York Sun <york.sun at nxp.com> wrote:
>
> +Simon
>
> On 06/27/2018 01:05 AM, Prabhakar Kushwaha wrote:
> > Hi All,
> >
> > We are trying to add support of device-tree for PowerPC platforms. As per our analysis following 2 options can be used.
> >
> > a) CONFIG_OF_SEPARATE
> > b) CONFIG_OF_EMBED
> >
> > In PowerPC platforms, reset_vector is always expected at the **last** address of flash.
> > U-boot binary has reset_vector at last followed by __bss sections(not present in binary) and must be programmed in such a way that reset_vecrot lie at **last** address of flash.
> >
> > Hence dtb cannot be appended at last of  u-boot binary.
> >
> > So there looks to be following 2 possible solutions
> > a) Use CONFIG_OF_SEPARATE and append dtb at start of u-boot binary.  This require change in flash map because u-boot start address needs to shifted (due to reset_vector requirements).
> >      Exiting offset of env and fman ucode also needs shifting. This approach requires modification in almost all existing PowerPC platform to adhere to new **modified** flash map.
> >
> > b) Use CONFIG_OF_EMBED and embed dtb inside u-boot. This way no change in exiting flash map. But its usage is being discouraged as per doc/README.fdt-control.
> >
>
> Clearly putting dtb at the very end doesn't work, neither last 4KB. I
> think we either use CONFIG_OF_EMBED (many boards use this way), or try
> "fdtcontroladdr".


I discourage CONFIG_OF_EMBED - it is a debug feature. I'm not sure if
you have other options though.

Can the DT perhaps go before U-Boot in the flash? We would need a way
to find it though.

With binman it is possible to put the DT anyway and have a symbol
defined to its address. Would that help?

Regards,
Simon