[U-Boot] [U-Boot, v4, 2/2] test/py: add test for whitelist of variables while importing environment

Thu Jun 28 13:39:44 UTC 2018

Hi Tom,

On Wed, Jun 27, 2018 at 11:23:38AM -0400, Tom Rini wrote:
> On Wed, Jun 27, 2018 at 09:52:50AM +0200, Quentin Schulz wrote:
> > Hi Tom,
> > 
> > On Tue, Jun 26, 2018 at 10:44:59AM -0400, Tom Rini wrote:
> > > On Tue, Jun 26, 2018 at 02:41:40PM +0200, Quentin Schulz wrote:
> > > > Hi all,
> > > > 
> > > > On Wed, Jun 13, 2018 at 01:02:06PM -0600, Stephen Warren wrote:
> > > > > On 06/13/2018 12:53 PM, Quentin Schulz wrote:
> > > > > > Hi Tom,
> > > > > > 
> > > > > > On Wed, Jun 13, 2018 at 11:43:32AM -0400, Tom Rini wrote:
> > > > > > > On Mon, Jun 04, 2018 at 11:47:30AM +0200, Quentin Schulz wrote:
> > > > > > > 
> > > > > > > > This tests that the importing of an environment with a specified
> > > > > > > > whitelist works as intended.
> > > > > > > > 
> > > > > > > > If there are variables passed as parameter to the env import command,
> > > > > > > >     those only should be imported in the current environment.
> > > > > > > > 
> > > > > > > > For each variable passed as parameter, if
> > > > > > > >   - foo is bar in current env and bar2 in exported env, after importing
> > > > > > > >   exported env, foo shall be bar2,
> > > > > > > >   - foo does not exist in current env and foo is bar2 in exported env,
> > > > > > > >   after importing exported env, foo shall be bar2,
> > > > > > > >   - foo is bar in current env and does not exist in exported env (but is
> > > > > > > >   passed as parameter), after importing exported env, foo shall be empty,
> > > > > > > > 
> > > > > > > > Any variable not passed as parameter should be left untouched.
> > > > > > > > 
> > > > > > > > Two other tests are made to test that size cannot be '-' if the checksum
> > > > > > > > protection is enabled.
> > > > > > > > 
> > > > > > > > Signed-off-by: Quentin Schulz <quentin.schulz at bootlin.com>
> > > > > > > > Reviewed-by: Simon Glass <sjg at chromium.org>
> > > > > > > > Reviewed-by: Stephen Warren <swarren at nvidia.com>
> > > > > > > 
> > > > > > > This seems to not be working?
> > > > > > > 
> > > > > > > https://travis-ci.org/trini/u-boot/jobs/391504525
> > > > > > > 
> > > > > > 
> > > > > > I just rebased on top of v2018.07-rc1, ran
> > > > > > make mrproper
> > > > > > ./test/py/test.py --bd sandbox --build
> > > > > > 
> > > > > > and the tests run fine ...
> > > > > 
> > > > > Most likely the failure is due to the test relying on some feature that
> > > > > isn't enabled on the board being tested (emulated via qemu); you'll need to
> > > > > add something like the following to indicate which feature the test relies
> > > > > upon:
> > > > > 
> > > > > @pytest.mark.buildconfigspec('cmd_echo')
> > > > > 
> > > > 
> > > > OK, I've added the dependency on cmd_importenv and cmd_exportenv, but
> > > > that does not make it work any better.
> > > > 
> > > > I added my U-Boot repo to Travis and ran the tests. Here is the output
> > > > of the job: https://travis-ci.org/QSchulz/u-boot/
> > > > 
> > > > Specifically, you have:
> > > > https://travis-ci.org/QSchulz/u-boot/jobs/396742661
> > > > https://travis-ci.org/QSchulz/u-boot/jobs/396742668
> > > > https://travis-ci.org/QSchulz/u-boot/jobs/396742669
> > > > https://travis-ci.org/QSchulz/u-boot/jobs/396742670
> > > > https://travis-ci.org/QSchulz/u-boot/jobs/396742671
> > > > 
> > > > I've dumped the RAM after the `env export` and it looks pretty much
> > > > empty compared to what I could see with sandbox tests.
> > > > 
> > > > Since all the other tests work, I'm not sure I actually introduced a
> > > > regression or if it just never worked. I'll run tests without my patches
> > > > that do a `env export` followed by a dump of the memory, a reset of the
> > > > environement and a `env import` to see where we stand right now.
> > > 
> > > It's possible you've exposed a latent bug here.  What stood out to me at
> > > the time was that it looked like we were using 0x0 for the address and
> > > that's quite possibly an invalid location to be using on these
> > > platforms.
> > > 
> > 
> > Yes, looked weird to me as well but can't tell if that's a legit RAM
> > address. Stephen says other tests interacting with RAM works on those
> > configs so that should be working.
> >> 
> > So, I tested without my patches for whitelisting and it does not work
> > for the same configs:
> > 
> > https://travis-ci.org/QSchulz/u-boot/jobs/396898590
> > https://travis-ci.org/QSchulz/u-boot/jobs/396898597
> > https://travis-ci.org/QSchulz/u-boot/jobs/396898598
> > https://travis-ci.org/QSchulz/u-boot/jobs/396898599
> > 
> > I'm not introducing a regression with my patch. Do we know if env import
> > and export is actually supported by those configs? How could we fix
> > those? Let me know if I can help.
> 
> Maybe the tests need to depend on something else too then, that's not
> enabled on these platforms?
> 
> > On another subject, I'm worried by these failing jobs:
> > https://travis-ci.org/QSchulz/u-boot/jobs/396898591
> > https://travis-ci.org/QSchulz/u-boot/jobs/396898592
> > 
> > Does this mean that we don't have a clean environnement for each and
> > every test? (env import complains when I'm trying to import an
> > environnement with ethXaddr in it, so I forcibly removed them from the
> > environnement before exporting).
> 
> Right, tests are run serially and don't reset the board for each, iirc.
> 

Is there a reason behind this behaviour?

We should fix this somewhere in the future, the tests are basically
meaningless otherwise. If we don't start from scratch for each and every
test (I'm not even talking about test series (e.g. all env tests) but
each test that is called), we basically test that this test works when
all the other tests before have behaved as they did. At best, you get
false positives, at worst you don't catch bugs.

Quentin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180628/501f93ad/attachment.sig>