[U-Boot] [PATCH v4 07/10] arm: dts: k3: Sync dts from Linux

Lokesh Vutla lokeshvutla at ti.com
Fri Nov 2 14:21:08 UTC 2018


Sync the k3-am654 specific dts files from Linux next with tag
20181019. This changes are in queue for Linux v4.20-rc1

Reviewed-by: Tom Rini <trini at konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/dts/k3-am65-main.dtsi               | 51 +++++++++--
 arch/arm/dts/k3-am65-mcu.dtsi                | 18 ++++
 arch/arm/dts/k3-am65-wakeup.dtsi             | 46 ++++++++++
 arch/arm/dts/k3-am65.dtsi                    | 54 ++++++-----
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 94 ++++++--------------
 5 files changed, 171 insertions(+), 92 deletions(-)
 create mode 100644 arch/arm/dts/k3-am65-mcu.dtsi
 create mode 100644 arch/arm/dts/k3-am65-wakeup.dtsi

diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index 2409344df4..adcd6341e4 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -8,13 +8,13 @@
 &cbass_main {
 	gic500: interrupt-controller at 1800000 {
 		compatible = "arm,gic-v3";
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x01800000 0x10000>,	/* GICD */
-		      <0x01880000 0x90000>;	/* GICR */
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
@@ -23,9 +23,50 @@
 
 		gic_its: gic-its at 18200000 {
 			compatible = "arm,gic-v3-its";
-			reg = <0x01820000 0x10000>;
+			reg = <0x00 0x01820000 0x00 0x10000>;
 			msi-controller;
 			#msi-cells = <1>;
 		};
 	};
+
+	secure_proxy_main: mailbox at 32c00000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x32c00000 0x00 0x100000>,
+		      <0x00 0x32400000 0x00 0x100000>,
+		      <0x00 0x32800000 0x00 0x100000>;
+		interrupt-names = "rx_011";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	main_uart0: serial at 2800000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+	};
+
+	main_uart1: serial at 2810000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+	};
+
+	main_uart2: serial at 2820000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+	};
 };
diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi
new file mode 100644
index 0000000000..8c611d16df
--- /dev/null
+++ b/arch/arm/dts/k3-am65-mcu.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_uart0: serial at 40a00000 {
+		compatible = "ti,am654-uart";
+			reg = <0x00 0x40a00000 0x00 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <96000000>;
+			current-speed = <115200>;
+	};
+};
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
new file mode 100644
index 0000000000..8d7b47f9df
--- /dev/null
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_wakeup {
+	dmsc: dmsc {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	wkup_uart0: serial at 42300000 {
+		compatible = "ti,am654-uart";
+		reg = <0x42300000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+	};
+};
diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi
index cede1fa098..3d4bf369d0 100644
--- a/arch/arm/dts/k3-am65.dtsi
+++ b/arch/arm/dts/k3-am65.dtsi
@@ -16,6 +16,14 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+	};
+
 	chosen { };
 
 	firmware {
@@ -46,38 +54,38 @@
 
 	cbass_main: interconnect at 100000 {
 		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
-			 <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
-			 <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
-			 <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
-			 <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
 			 /* MCUSS Range */
-			 <0x28380000 0x00 0x28380000 0x03880000>,
-			 <0x40200000 0x00 0x40200000 0x00900100>,
-			 <0x42040000 0x00 0x42040000 0x03ac2400>,
-			 <0x45100000 0x00 0x45100000 0x00c24000>,
-			 <0x46000000 0x00 0x46000000 0x00200000>,
-			 <0x47000000 0x00 0x47000000 0x00068400>;
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
 
 		cbass_mcu: interconnect at 28380000 {
 			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
-				 <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
-				 <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
-				 <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
-				 <0x46000000 0x46000000 0x00200000>, /* CPSW */
-				 <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
 
 			cbass_wakeup: interconnect at 42040000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				/* WKUP  Basic peripherals */
-				ranges = <0x42040000 0x42040000 0x03ac2400>;
+				ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
 			};
 		};
 	};
@@ -85,3 +93,5 @@
 
 /* Now include the peripherals for each bus segments */
 #include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index d4ecb3be10..143eb6d630 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -17,56 +17,10 @@
 
 &cbass_main{
 	u-boot,dm-spl;
-	secure_proxy: secure_proxy at 32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x32c00000 0x100000>,
-		      <0x32400000 0x100000>,
-		      <0x32800000 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	dmsc: dmsc {
-		compatible = "ti,k2g-sci";
-		ti,host-id = <12>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		/*
-		 * In case of rare platforms that does not use am6 as
-		 * system master, use /delete-property/
-		 */
-		ti,system-reboot-controller;
-		mbox-names = "rx", "tx";
-
-		mboxes= <&secure_proxy 11>,
-			<&secure_proxy 13>;
-
-		k3_pds: power-controller {
-			compatible = "ti,sci-pm-domain";
-			#power-domain-cells = <1>;
-		};
-
-		k3_clks: clocks {
-			compatible = "ti,k2g-sci-clk";
-			#clock-cells = <2>;
-		};
-
-		k3_reset: reset-controller {
-			compatible = "ti,sci-reset";
-			#reset-cells = <2>;
-		};
-
-		k3_sysreset: sysreset-controller {
-			compatible = "ti,sci-sysreset";
-		};
-	};
 
 	main_pmx0: pinmux at 11c000 {
 		compatible = "pinctrl-single";
-		reg = <0x11c000 0x2e4>;
+		reg = <0x0 0x11c000 0x0 0x2e4>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -74,28 +28,16 @@
 
 	main_pmx1: pinmux at 11c2e8 {
 		compatible = "pinctrl-single";
-		reg = <0x11c2e8 0x24>;
+		reg = <0x0 0x11c2e8 0x0 0x24>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	main_uart0: serial at 2800000 {
-		compatible = "ti,am654-uart", "ti,omap4-uart", "ns16550a";
-		reg = <0x02800000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <48000000>;
-		current-speed = <115200>;
-		status = "disabled";
-		u-boot,dm-pre-reloc;
-	};
-
 	sdhci0: sdhci at 04F80000 {
 		compatible = "arasan,sdhci-5.1";
-		reg = <0x4F80000 0x1000>,
-		      <0x4F90000 0x400>;
+		reg = <0x0 0x4F80000 0x0 0x1000>,
+		      <0x0 0x4F90000 0x0 0x400>;
 		clocks = <&k3_clks 47 1>;
 		power-domains = <&k3_pds 47>;
 		max-frequency = <25000000>;
@@ -103,8 +45,8 @@
 
 	sdhci1: sdhci at 04FA0000 {
 		compatible = "arasan,sdhci-5.1";
-		reg = <0x4FA0000 0x1000>,
-		      <0x4FB0000 0x400>;
+		reg = <0x0 0x4FA0000 0x0 0x1000>,
+		      <0x0 0x4FB0000 0x0 0x400>;
 		clocks = <&k3_clks 48 1>;
 		power-domains = <&k3_pds 48>;
 		max-frequency = <25000000>;
@@ -112,12 +54,31 @@
 
 };
 
-&secure_proxy {
+&cbass_mcu {
+	u-boot,dm-spl;
+	wkup_pmx0: pinmux at 4301c000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x4301c000 0x0 0x118>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+};
+
+&cbass_wakeup {
+	u-boot,dm-spl;
+};
+
+&secure_proxy_main {
 	u-boot,dm-spl;
 };
 
 &dmsc {
 	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
 };
 
 &k3_pds {
@@ -141,6 +102,7 @@
 			AM65X_IOPAD(0x01ec, PIN_INPUT | MUX_MODE0)	/* (AG11) UART0_CTSn */
 			AM65X_IOPAD(0x01f0, PIN_OUTPUT | MUX_MODE0)	/* (AD11) UART0_RTSn */
 		>;
+		u-boot,dm-spl;
 	};
 
 	main_mmc0_pins_default: main_mmc0_pins_default {
@@ -157,6 +119,7 @@
 			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP | MUX_MODE0) /* (D25) MMC0_DAT7 */
 			AM65X_IOPAD(0x01b0, PIN_INPUT | MUX_MODE0) /* (C25) MMC0_DS */
 		>;
+		u-boot,dm-spl;
 	};
 
 	main_mmc1_pins_default: main_mmc1_pins_default {
@@ -170,6 +133,7 @@
 			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP | MUX_MODE0) /* (B24) MMC1_SDCD */
 			AM65X_IOPAD(0x02e0, PIN_INPUT | MUX_MODE0) /* (C24) MMC1_SDWP */
 		>;
+		u-boot,dm-spl;
 	};
 
 };
-- 
2.19.1



More information about the U-Boot mailing list