[U-Boot] [RFC PATCH 3/3] ARM: dts: meson: Update dts files from Linux v4.19
Loic Devulder
ldevulder at suse.de
Fri Nov 2 14:32:29 UTC 2018
This patch modifies Device Tree of meson boards.
The dts files are synchronized from Linux 4.19.
Signed-off-by: Loic Devulder <ldevulder at suse.de>
---
arch/arm/dts/meson-gx.dtsi | 31 +++++++++++++----
arch/arm/dts/meson-gxbb-nanopi-k2.dts | 48 +++++++++++++++++++++++++++
arch/arm/dts/meson-gxbb.dtsi | 14 ++++----
arch/arm/dts/meson-gxl-mali.dtsi | 2 +-
arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 5 +--
arch/arm/dts/meson-gxl-s905x-p212.dtsi | 8 ++---
arch/arm/dts/meson-gxl.dtsi | 26 ++++++---------
arch/arm/dts/meson-gxm-khadas-vim2.dts | 24 ++++++++++++++
8 files changed, 121 insertions(+), 37 deletions(-)
diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index 3c31e21cbe..f1e5cdbade 100644
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -35,10 +35,16 @@
no-map;
};
+ /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved_alt: secmon at 5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
- size = <0x0 0xbc00000>;
+ size = <0x0 0x10000000>;
alignment = <0x0 0x400000>;
linux,cma-default;
};
@@ -338,7 +344,7 @@
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
sysctrl_AO: sys-ctrl at 0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
pwrc_vpu: power-controller-vpu {
@@ -417,6 +423,19 @@
};
};
+ dmcbus: bus at c8838000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+ canvas: video-lut at 48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+ };
+ };
+
hiubus: bus at c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
@@ -425,7 +444,7 @@
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
sysctrl: system-controller at 0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
reg = <0 0 0 0x400>;
};
@@ -457,21 +476,21 @@
sd_emmc_a: mmc at 70000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x70000 0x0 0x2000>;
+ reg = <0x0 0x70000 0x0 0x800>;
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_b: mmc at 72000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x72000 0x0 0x2000>;
+ reg = <0x0 0x72000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_c: mmc at 74000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x74000 0x0 0x2000>;
+ reg = <0x0 0x74000 0x0 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
diff --git a/arch/arm/dts/meson-gxbb-nanopi-k2.dts b/arch/arm/dts/meson-gxbb-nanopi-k2.dts
index 7d5709c37e..cbe99bd4e0 100644
--- a/arch/arm/dts/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm/dts/meson-gxbb-nanopi-k2.dts
@@ -106,6 +106,42 @@
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
+
+ /* CVBS is available on CON1 pin 36, disabled by default */
+ cvbs-connector {
+ compatible = "composite-video-connector";
+ status = "disabled";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
@@ -137,6 +173,18 @@
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi
index 562c26a0ba..1ade7e4868 100644
--- a/arch/arm/dts/meson-gxbb.dtsi
+++ b/arch/arm/dts/meson-gxbb.dtsi
@@ -307,11 +307,10 @@
clock-names = "isfr", "iahb", "venci";
};
-&hiubus {
- clkc: clock-controller at 0 {
+&sysctrl {
+ clkc: clock-controller {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
};
};
@@ -391,7 +390,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
@@ -716,6 +715,7 @@
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_A>;
};
&sd_emmc_b {
@@ -723,6 +723,7 @@
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
};
&sd_emmc_c {
@@ -730,6 +731,7 @@
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
};
&spicc {
@@ -749,12 +751,12 @@
};
&uart_AO {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi
index eb327664a4..6aaafff674 100644
--- a/arch/arm/dts/meson-gxl-mali.dtsi
+++ b/arch/arm/dts/meson-gxl-mali.dtsi
@@ -6,7 +6,7 @@
&apb {
mali: gpu at c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
reg = <0x0 0xc0000 0x0 0x40000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
index 3e3eb31748..90a56af967 100644
--- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
@@ -13,7 +13,7 @@
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Libre Technology CC";
+ model = "Libre Computer Board AML-S905X-CC";
aliases {
serial0 = &uart_AO;
@@ -234,9 +234,6 @@
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
max-frequency = <100000000>;
disable-wp;
diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
index 3bd405079b..a1b31013ab 100644
--- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
@@ -191,8 +191,8 @@
};
&usb2_phy0 {
- /*
- * HDMI_5V is also used as supply for the USB VBUS.
- */
- phy-supply = <&hdmi_5v>;
+ /*
+ * HDMI_5V is also used as supply for the USB VBUS.
+ */
+ phy-supply = <&hdmi_5v>;
};
diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi
index dba365ed4b..8f0bb3c44b 100644
--- a/arch/arm/dts/meson-gxl.dtsi
+++ b/arch/arm/dts/meson-gxl.dtsi
@@ -13,14 +13,6 @@
/ {
compatible = "amlogic,meson-gxl";
- reserved-memory {
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved_alt: secmon at 5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
- };
-
soc {
usb0: usb at c9000000 {
status = "disabled";
@@ -267,11 +259,10 @@
clock-names = "isfr", "iahb", "venci";
};
-&hiubus {
- clkc: clock-controller at 0 {
- compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+&sysctrl {
+ clkc: clock-controller {
+ compatible = "amlogic,gxl-clkc";
#clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
};
};
@@ -346,7 +337,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
@@ -725,13 +716,15 @@
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_A>;
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
};
&sd_emmc_c {
@@ -739,6 +732,7 @@
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
};
&spicc {
@@ -758,12 +752,12 @@
};
&uart_AO {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts
index 0868da476e..313f88f875 100644
--- a/arch/arm/dts/meson-gxm-khadas-vim2.dts
+++ b/arch/arm/dts/meson-gxm-khadas-vim2.dts
@@ -209,10 +209,34 @@
#cooling-cells = <2>;
};
+&cpu1 {
+ #cooling-cells = <2>;
+};
+
+&cpu2 {
+ #cooling-cells = <2>;
+};
+
+&cpu3 {
+ #cooling-cells = <2>;
+};
+
&cpu4 {
#cooling-cells = <2>;
};
+&cpu5 {
+ #cooling-cells = <2>;
+};
+
+&cpu6 {
+ #cooling-cells = <2>;
+};
+
+&cpu7 {
+ #cooling-cells = <2>;
+};
+
ðmac {
pinctrl-0 = <ð_pins>;
pinctrl-names = "default";
--
2.16.4
More information about the U-Boot
mailing list