[U-Boot] [PATCH v2 54/58] mpc83xx: Get rid of CONFIG_SYS_LBC_*
Mario Six
mario.six at gdsys.cc
Mon Nov 5 14:45:08 UTC 2018
Except for one counter example, CONFIG_SYS_LBC_LBCR always has a value
of either 0x00040000 or 0x00000000.
CONFIG_SYS_LBC_MRTPR always has the value 0x20000000.
CONFIG_SYS_LBC_LSDMR_{1,2,4,5} are not set for any mpc83xx board.
CONFIG_SYS_LBC_LSRT is set by one board (to 0x32000000).
To simplify the configuration files, hardcode the setting of these
values for mpc83xx.
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
v1 -> v2:
New in v2
---
board/freescale/mpc8313erdb/sdram.c | 5 +++--
board/freescale/mpc8349emds/mpc8349emds.c | 27 ++++++++++++++++++---------
board/ids/ids8313/ids8313.c | 4 ++--
board/sbc8349/sbc8349.c | 25 +++++++++++++++++--------
board/ve8313/ve8313.c | 4 ++--
include/configs/MPC8308RDB.h | 5 -----
include/configs/MPC8313ERDB_NAND.h | 10 ----------
include/configs/MPC8313ERDB_NOR.h | 10 ----------
include/configs/MPC8315ERDB.h | 6 +-----
include/configs/MPC8323ERDB.h | 5 -----
include/configs/MPC832XEMDS.h | 5 -----
include/configs/MPC8349EMDS.h | 8 --------
include/configs/MPC8349EMDS_SDRAM.h | 8 --------
include/configs/MPC8349ITX.h | 13 -------------
include/configs/MPC837XEMDS.h | 4 ----
include/configs/MPC837XERDB.h | 4 ----
include/configs/caddy2.h | 8 --------
include/configs/hrcon.h | 5 -----
include/configs/ids8313.h | 9 ---------
include/configs/kmopti2.h | 5 -----
include/configs/kmsupx5.h | 5 -----
include/configs/kmtegr1.h | 5 -----
include/configs/kmtepr2.h | 5 -----
include/configs/kmvect1.h | 5 -----
include/configs/mpc8308_p1m.h | 5 -----
include/configs/sbc8349.h | 8 --------
include/configs/strider.h | 5 -----
include/configs/suvd3.h | 5 -----
include/configs/tuge1.h | 5 -----
include/configs/tuxx1.h | 5 -----
include/configs/ve8313.h | 7 -------
include/configs/vme8349.h | 8 --------
32 files changed, 43 insertions(+), 195 deletions(-)
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index 090412d4b6c..c8e30a09478 100644
--- a/board/freescale/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -109,8 +109,9 @@ int dram_init(void)
msize = fixed_sdram();
/* Local Bus setup lbcr and mrtpr */
- lbc->lbcr = CONFIG_SYS_LBC_LBCR;
- lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+ lbc->lbcr = (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF);
+ /* LB refresh timer prescal, 266MHz/32 */
+ lbc->mrtpr = 0x20000000;
sync();
#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index cfa2524df6d..334eae25422 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -183,28 +183,36 @@ void sdram_init(void)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile fsl_lbc_t *lbc = &immap->im_lbc;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
-
+ const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 |
+ LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 |
+ LSDMR_WRC3 | LSDMR_CL3;
/*
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
*/
/* setup mtrpt, lsrt and lbcr for LB bus */
- lbc->lbcr = CONFIG_SYS_LBC_LBCR;
- lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
- lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+ lbc->lbcr = 0x00000000;
+ /* LB refresh timer prescal, 266MHz/32 */
+ lbc->mrtpr = 0x20000000;
+ /* LB sdram refresh timer, about 6us */
+ lbc->lsrt = 0x32000000;
asm("sync");
/*
* Configure the SDRAM controller Machine Mode Register.
*/
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+ /* 0x40636733; normal operation */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
+
+ /* 0x68636733; precharge all the banks */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+ /* 0x48636733; auto refresh */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
asm("sync");
/*1 times*/
*sdram_addr = 0xff;
@@ -232,12 +240,13 @@ void sdram_init(void)
udelay(100);
/* 0x58636733; mode register write operation */
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
+ /* 0x40636733; normal operation */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
diff --git a/board/ids/ids8313/ids8313.c b/board/ids/ids8313/ids8313.c
index ff3265c1dc6..9c8c84e1ff8 100644
--- a/board/ids/ids8313/ids8313.c
+++ b/board/ids/ids8313/ids8313.c
@@ -129,8 +129,8 @@ int dram_init(void)
msize = setup_sdram();
- out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
- out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
+ out_be32(&lbc->lbcr, (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF));
+ out_be32(&lbc->mrtpr, 0x20000000);
sync();
gd->ram_size = msize;
diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
index e51eeae065d..a647de6b112 100644
--- a/board/sbc8349/sbc8349.c
+++ b/board/sbc8349/sbc8349.c
@@ -147,6 +147,9 @@ void sdram_init(void)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile fsl_lbc_t *lbc = &immap->im_lbc;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
+ const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 |
+ LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 |
+ LSDMR_WRC3 | LSDMR_CL3;
puts("\n SDRAM on Local Bus: ");
print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
@@ -156,22 +159,27 @@ void sdram_init(void)
*/
/* setup mtrpt, lsrt and lbcr for LB bus */
- lbc->lbcr = CONFIG_SYS_LBC_LBCR;
- lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
- lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+ lbc->lbcr = 0x00000000;
+ /* LB refresh timer prescal, 266MHz/32 */
+ lbc->mrtpr = 0x20000000;
+ /* LB sdram refresh timer, about 6us */
+ lbc->lsrt = 0x32000000;
asm("sync");
/*
* Configure the SDRAM controller Machine Mode Register.
*/
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
+ /* 0x40636733; normal operation */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+ /* 0x68636733; precharge all the banks */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+ /* 0x48636733; auto refresh */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
asm("sync");
/*1 times*/
*sdram_addr = 0xff;
@@ -199,12 +207,13 @@ void sdram_init(void)
udelay(100);
/* 0x58636733; mode register write operation */
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
+ /* 0x40636733; normal operation */
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c
index f4148a21e3b..1559ff210da 100644
--- a/board/ve8313/ve8313.c
+++ b/board/ve8313/ve8313.c
@@ -100,8 +100,8 @@ int dram_init(void)
msize = fixed_sdram();
/* Local Bus setup lbcr and mrtpr */
- out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
- out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
+ out_be32(&lbc->lbcr, 0x00040000);
+ out_be32(&lbc->mrtpr, 0x20000000);
sync();
/* return total bus SDRAM size(bytes) -- DDR */
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 5d31d4a0b6b..85d7ff6c521 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -122,11 +122,6 @@
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00040000
-
-/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h
index 6f100fc7e7b..4153d609be4 100644
--- a/include/configs/MPC8313ERDB_NAND.h
+++ b/include/configs/MPC8313ERDB_NAND.h
@@ -186,16 +186,6 @@
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
-/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
- | (0xFF << LBCR_BMT_SHIFT) \
- | 0xF) /* 0x0004ff0f */
-
- /* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */
-
/* drivers/mtd/nand/raw/nand.c */
#if defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_NAND_BASE 0xFFF00000
diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h
index 582c7329cee..5c52f97e88b 100644
--- a/include/configs/MPC8313ERDB_NOR.h
+++ b/include/configs/MPC8313ERDB_NOR.h
@@ -162,16 +162,6 @@
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
-/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
- | (0xFF << LBCR_BMT_SHIFT) \
- | 0xF) /* 0x0004ff0f */
-
- /* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */
-
/* drivers/mtd/nand/nand.c */
#define CONFIG_SYS_NAND_BASE 0xE2800000
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 0b94b0c5cf9..521c5ca6eec 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -116,11 +116,7 @@
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00040000
-#define CONFIG_FSL_ELBC 1
+#define CONFIG_FSL_ELBC
/*
* FLASH on the Local Bus
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index a90a9a86f8d..418c6729e19 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -114,11 +114,6 @@
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
-/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 88b6f873978..df9cc48417f 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -114,11 +114,6 @@
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
-/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index fdbd15ea93e..7640d7610d6 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -154,14 +154,6 @@
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
/*
- * Local Bus LCRR and LBCR regs
- * LCRR: DLL bypass, Clock divider is 4
- * External Local Bus rate is
- * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
-/*
* Serial Port
*/
#define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
index 1e0e297351e..493f6df1874 100644
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -151,14 +151,6 @@
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
/*
- * Local Bus LCRR and LBCR regs
- * LCRR: DLL bypass, Clock divider is 4
- * External Local Bus rate is
- * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
-/*
* The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
*/
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 388910ac38d..a3f704c73b2 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -251,19 +251,6 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
/*
- * Local Bus LCRR and LBCR regs
- * LCRR: DLL bypass, Clock divider is 4
- * External Local Bus rate is
- * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
- /* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT 0x32000000
- /* LB refresh timer prescal, 266MHz/32*/
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-
-/*
* Serial Port
*/
#define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 61f9eaf7150..724f8afb76d 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -134,10 +134,6 @@
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
#define CONFIG_FSL_ELBC 1
/*
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 07b206ff9f9..13a76829585 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -158,10 +158,6 @@
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
#define CONFIG_FSL_ELBC 1
/*
diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h
index 928136f325f..15ac17985f3 100644
--- a/include/configs/caddy2.h
+++ b/include/configs/caddy2.h
@@ -96,14 +96,6 @@
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Malloc size */
-/*
- * Local Bus LCRR and LBCR regs
- * LCRR: no DLL bypass, Clock divider is 4
- * External Local Bus rate is
- * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
/*
diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h
index d73e848b0c7..8029ae9dd75 100644
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@@ -111,11 +111,6 @@
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00040000
-
-/*
* FLASH on the Local Bus
*/
#if 1
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 8bcd305c490..3140de2d21a 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -37,15 +37,6 @@
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LBC_LBCR (0x00040000 |\
- (0xFF << LBCR_BMT_SHIFT) |\
- 0xF)
-
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-
-/*
* Internal Definitions
*/
/*
diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h
index aa0f7f1de1c..af8ee4ae9da 100644
--- a/include/configs/kmopti2.h
+++ b/include/configs/kmopti2.h
@@ -293,11 +293,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */
diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h
index 9f97a5f3ee2..3bd29c9f037 100644
--- a/include/configs/kmsupx5.h
+++ b/include/configs/kmsupx5.h
@@ -293,11 +293,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h
index 9b89f7b985e..e227a014508 100644
--- a/include/configs/kmtegr1.h
+++ b/include/configs/kmtegr1.h
@@ -345,11 +345,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
/* must be after the include because KMBEC_FPGA is otherwise undefined */
#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h
index b80f36c69ee..a7e338beb2c 100644
--- a/include/configs/kmtepr2.h
+++ b/include/configs/kmtepr2.h
@@ -293,11 +293,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */
diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h
index 8ff7571866e..4c6cadef061 100644
--- a/include/configs/kmvect1.h
+++ b/include/configs/kmvect1.h
@@ -337,11 +337,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 0392c3e8b40..3ce4b705b70 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -126,11 +126,6 @@
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00040000
-
-/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index b4ae7b75543..d2053cc0597 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -123,14 +123,6 @@
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
-/*
- * Local Bus LCRR and LBCR regs
- * LCRR: DLL bypass, Clock divider is 4
- * External Local Bus rate is
- * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
/*
diff --git a/include/configs/strider.h b/include/configs/strider.h
index e92bd1e8f10..22d255aabb8 100644
--- a/include/configs/strider.h
+++ b/include/configs/strider.h
@@ -111,11 +111,6 @@
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00040000
-
-/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index e8fe19ca4e7..ac509f31f7c 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -290,11 +290,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h
index f6d067b97b8..61b3e6d9c8f 100644
--- a/include/configs/tuge1.h
+++ b/include/configs/tuge1.h
@@ -293,11 +293,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h
index 8fa2913850b..b4dfc51eccb 100644
--- a/include/configs/tuxx1.h
+++ b/include/configs/tuxx1.h
@@ -293,11 +293,6 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index 2116d6bbcf8..66f771d818f 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -129,13 +129,6 @@
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LBC_LBCR 0x00040000
-
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-
-/*
* NAND settings
*/
#define CONFIG_SYS_NAND_BASE 0x61000000
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 1bce6c732d9..1c3430d8491 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -96,14 +96,6 @@
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Malloc size */
-/*
- * Local Bus LCRR and LBCR regs
- * LCRR: no DLL bypass, Clock divider is 4
- * External Local Bus rate is
- * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
/*
--
2.11.0
More information about the U-Boot
mailing list