[U-Boot] [PATCH 2/2] Aquantia: Print information about system interface and firmaware version

[Clément Péron]

Hi Valentin-catalin,

There is a typo in your commit title.

Regards,
Clement

On Tue, 30 Oct 2018 at 11:44, Valentin-catalin Neacsu
<valentin-catalin.neacsu at nxp.com> wrote:
>
> Print information about Aquantia firmware loaded on the phy
> Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu at nxp.com>
> ---
>  drivers/net/phy/aquantia.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
> index 603abb5a7f..eb3950092d 100644
> --- a/drivers/net/phy/aquantia.c
> +++ b/drivers/net/phy/aquantia.c
> @@ -23,6 +23,11 @@
>
>  #define AQUANTIA_SYSTEM_INTERFACE_SR     0xe812
>  #define AQUANTIA_VENDOR_PROVISIONING_REG 0xC441
> +#define AQUANTIA_FIRMWARE_ID            0x20
> +#define AQUANTIA_RESERVED_STATUS        0xc885
> +#define AQUANTIA_FIRMWARE_MAJOR_MASK    0xff00
> +#define AQUANTIA_FIRMWARE_MINOR_MASK    0xff
> +#define AQUANTIA_FIRMWARE_BUILD_MASK    0xf0
>
>  #define AQUANTIA_USX_AUTONEG_CONTROL_ENA 0x0008
>  #define AQUANTIA_SI_IN_USE_MASK          0x0078
> @@ -31,6 +36,7 @@
>  int aquantia_config(struct phy_device *phydev)
>  {
>         u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
> +       u32 reg_val1 = 0;
>
>         if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
>                 /* 1000BASE-T mode */
> @@ -57,6 +63,11 @@ int aquantia_config(struct phy_device *phydev)
>                         phy_write(phydev, MDIO_MMD_PHYXS,
>                                   AQUANTIA_VENDOR_PROVISIONING_REG,
>                                   AQUANTIA_USX_AUTONEG_CONTROL_ENA);
> +                       printf("%s: system interface USXGMII\n",
> +                              phydev->dev->name);
> +               } else {
> +                       printf("%s: system interface XFI\n",
> +                              phydev->dev->name);
>                 }
>
>         } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) {
> @@ -74,6 +85,16 @@ int aquantia_config(struct phy_device *phydev)
>                 val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK;
>                 phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
>         }
> +
> +       val = phy_read(phydev, MDIO_MMD_VEND1, AQUANTIA_RESERVED_STATUS);
> +       reg_val1 = phy_read(phydev, MDIO_MMD_VEND1, AQUANTIA_FIRMWARE_ID);
> +
> +       printf("%s: %s Firmware Version %x.%x.%x\n", phydev->dev->name,
> +              phydev->drv->name,
> +              (reg_val1 & AQUANTIA_FIRMWARE_MAJOR_MASK) >> 8,
> +              reg_val1 & AQUANTIA_FIRMWARE_MINOR_MASK,
> +              (val & AQUANTIA_FIRMWARE_BUILD_MASK) >> 4);
> +
>         return 0;
>  }
>
> --
> 2.17.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot