[U-Boot] [PATCH v5 0/4] Add support for Pinebook
Vasily Khoruzhick
anarsoul at gmail.com
Tue Nov 6 04:24:27 UTC 2018
This series adds support for the Pinebook, an allwinner A64 laptop
produced by Pine64. It also adds support for mmc delay calibration,
R_I2C controller, and addresses the issue with activating video
bridge when any of GPIOs is missing.
This series depends on André's "sunxi: A64/H3/H5 DT updates"
v2: - sync sun50i-a64.dtsi with linux instead of adding missing nodes
- take sun50i-a64-pinebook.dts from linux
- don't introduce new Kconfig for A64 MMC calibration
- improve code in video bridge uclass to check for presensce of
GPIO instead of ingoring EINVAL errors
v3: - enable calibration for H6 as well
- init ret variable in video_bridge_set_active()
- fix order of dts files Makefile
- split anx6345 binding into sun50i-a64-pinebook-u-boot.dts
- drop speaker_amp node from pinebook dts
- drop unnecessary options from defconfig
v4: - sync device tree files with linux-next
v5: - drop patch to sync device tree files with linux-next
Vasily Khoruzhick (4):
mmc: sunxi: add support for automatic delay calibration
dm: video: bridge: don't fail to activate bridge if reset or sleep
GPIO is missing
sun50i: A64: add support for R_I2C controller
sunxi: DT: add support for Pinebook
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 +
arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
arch/arm/mach-sunxi/Kconfig | 1 +
board/sunxi/board.c | 6 +
configs/pinebook_defconfig | 22 ++
drivers/mmc/sunxi_mmc.c | 21 +-
drivers/video/bridge/video-bridge-uclass.c | 16 +-
10 files changed, 376 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
create mode 100644 configs/pinebook_defconfig
--
2.19.1
More information about the U-Boot
mailing list