[U-Boot] [PATCH] sunxi: Fix memory 2-rank initialization for a33 cpu

Michael Nazzareno Trimarchi michael at amarulasolutions.com
Wed Nov 7 17:13:55 UTC 2018


Hi Jagan

On Mon, Nov 5, 2018 at 10:02 AM Maxime Ripard <maxime.ripard at bootlin.com> wrote:
>
> On Wed, Oct 31, 2018 at 08:03:16PM +0100, Michael Trimarchi wrote:
> > When we initialize the memory we need to autodetect rank and size
> > but this can happen only if we send the proper reset to both
> > memory module including cke signal.
> > For this reason we need initialize the physical on both channel because
> > we need to presume that both are connected. This way let the CLKE to be
> > activated at the right time with the memory reset coming from the cpu
> >
> > Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
>
> Acked-by: Maxime Ripard <maxime.ripard at bootlin.com>
>

Can you test on a consumer board with A33? I have tested over
oscilloscope on my device

Michael

> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |


More information about the U-Boot mailing list