[U-Boot] [PATCH v3 19/28] riscv: do not blindly modify the mstatus CSR

Lukas Auer lukas.auer at aisec.fraunhofer.de
Fri Nov 9 12:59:14 UTC 2018


The mstatus CSR includes WPRI (writes preserve values, reads ignore
values) fields and must therefore not be set to zero without preserving
these fields. It is not apparent why mstatus is set to zero here since
it is not required for U-Boot to run. Remove it.

This instruction and others encode zero as an immediate.  RISC-V has the
zero register for this purpose. Replace the immediates with the zero
register.

Signed-off-by: Lukas Auer <lukas.auer at aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Rick Chen <rick at andestech.com>
---

Changes in v3: None
Changes in v2: None

 arch/riscv/cpu/start.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index c313477ae0..b01ea6e224 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -38,8 +38,9 @@ _start:
 	SREG	a2, 0(t0)
 	la	t0, trap_entry
 	csrw	mtvec, t0
-	csrwi	mstatus, 0
-	csrwi	mie, 0
+
+	/* mask all interrupts */
+	csrw	mie, zero
 
 /*
  * Set stackpointer in internal/ex RAM to call board_init_f
@@ -160,11 +161,10 @@ clear_bss:
 	add	t0, t0, t6		/* t0 <- rel __bss_start in RAM */
 	la	t1, __bss_end		/* t1 <- rel __bss_end in FLASH */
 	add	t1, t1, t6		/* t1 <- rel __bss_end in RAM */
-	li	t2, 0x00000000		/* clear */
 	beq	t0, t1, call_board_init_r
 
 clbss_l:
-	SREG	t2, 0(t0)		/* clear loop... */
+	SREG	zero, 0(t0)		/* clear loop... */
 	addi	t0, t0, REGBYTES
 	bne	t0, t1, clbss_l
 
-- 
2.17.2



More information about the U-Boot mailing list