[U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target

[Marcel Ziswiler]

Hi Stefano

On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote:
> Hi Marcel,
> 
> On 08/11/18 02:55, Fabio Estevam wrote:
> > [Adding Stefano]
> > 
> > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <marcel at ziswiler.com
> > > wrote:
> > > 
> > > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > > 
> > > The make macro to check if the binary exceeds the board size
> > > limit is
> > > taken straight from the root Makefile.
> > > 
> > > Without this and e.g. enabled EFI Vybrid fails booting as the
> > > regular
> > > size limit check does not take the final u-boot.imx binary size
> > > into
> > > account which is bigger due to alignment as well as IMX header
> > > stuff.
> > > 
> > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > 
> > Reviewed-by: Fabio Estevam <festevam at gmail.com>
> > 
> > Hi Stefano, maybe this could be material for 2018.11?
> > 
> 
> Added both patches to u-boot-imx, check is effective, now size is too
> much and build fails:
> 
> 
> Building current source for 1 boards (1 thread, 8 jobs per thread)
>        arm:  +   colibri_vf
> +u-boot.imx exceeds file size limit:
> +  limit:  520192 bytes
> +  actual: 526104 bytes
> +  excess: 5912 bytes
> +make[2]: *** [u-boot.imx] Error 1
> +make[1]: *** [u-boot.imx] Error 2
> +make: *** [sub-make] Error 2
>     0    0    1 /1      colibri_vf
> 
> Can you take a look ?

I sent a v2 additionally dropping CONFIG_CMDLINE_EDITING and SPI
support saving another 8 Kb which for me makes it work right back to
GCC 6.1.1 which I believe is anyway about as far back as one can go
even compiling U-Boot. Can you please give that another go?

> Best regards,
> Stefeano

Cheers

Marcel