[U-Boot] [PATCH 15/15] imx: add i.MX8MQ EVK support

[Troy Kisky]

On 11/9/2018 1:17 AM, Peng Fan wrote:
> Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
> firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
> DRAM....


> +
> +static struct dram_cfg_param lpddr4_ddrc_cfg[] = {
> +	/* Start to config, default 3200mbps */
> +	/* dis_dq=1, indicates no reads or writes are issued to SDRAM */
> +	{ DDRC_DBG1(0), 0x00000001 },


Just a little elaboration on how a structure might work here

#define DDRC_ADDR(reg, x) &((struct ddrc *)(DDRC_IPS_BASE_ADDR(x))->reg)

	{ DDRC_ADDR(dbg1, 0), 0x00000001 },



Thanks for working on this Peng!


BR
Troy