[U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Bin Meng
bmeng.cn at gmail.com
Tue Nov 13 08:21:53 UTC 2018
This adds U-Boot syscon driver for RISC-V Core Local Interruptor
(CLINT). The CLINT block holds memory-mapped control and status
registers associated with software and timer interrupts.
3 APIs are provided for U-Boot to implement Supervisor Binary
Interface (SBI) as defined by the RISC-V privileged architecture
spec v1.10.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
arch/riscv/Kconfig | 8 +++++
arch/riscv/include/asm/clint.h | 24 +++++++++++++++
arch/riscv/lib/Makefile | 1 +
arch/riscv/lib/clint.c | 69 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 102 insertions(+)
create mode 100644 arch/riscv/include/asm/clint.h
create mode 100644 arch/riscv/lib/clint.c
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a37e895..abfc083 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -73,4 +73,12 @@ config 32BIT
config 64BIT
bool
+config RISCV_CLINT
+ bool "Support Core Local Interruptor (CLINT)"
+ select REGMAP
+ select SYSCON
+ help
+ The CLINT block holds memory-mapped control and status registers
+ associated with software and timer interrupts.
+
endmenu
diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
new file mode 100644
index 0000000..1c6024f
--- /dev/null
+++ b/arch/riscv/include/asm/clint.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+#ifndef _ASM_RISCV_CLINT_H
+#define _ASM_RISCV_CLINT_H
+
+/*
+ * System controllers in a RISC-V system
+ *
+ * So far only Core Local Interruptor (CLINT) is defined. If new system
+ * controller is added, we may need move the defines to somewhere else.
+ */
+enum {
+ RISCV_NONE,
+ RISCV_SYSCON_CLINT, /* Core Local Interruptor (CLINT) */
+};
+
+void riscv_send_ipi(int hart);
+void riscv_set_timecmp(int hart, u64 cmp);
+u64 riscv_get_time(void);
+
+#endif /* _ASM_RISCV_CLINT_H */
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index b58db89..b5a77c2 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += cache.o
+obj-$(CONFIG_RISCV_CLINT) += clint.o
obj-y += interrupts.o
obj-y += reset.o
obj-y += setjmp.o
diff --git a/arch/riscv/lib/clint.c b/arch/riscv/lib/clint.c
new file mode 100644
index 0000000..369aa1d
--- /dev/null
+++ b/arch/riscv/lib/clint.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * U-Boot syscon driver for RISC-V Core Local Interruptor (CLINT)
+ * The CLINT block holds memory-mapped control and status registers
+ * associated with software and timer interrupts.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/clint.h>
+#include <asm/io.h>
+
+/* MSIP registers */
+#define MSIP_REG(base, hart) ((ulong)(base) + (hart) * 4)
+/* Timer compare register */
+#define MTIMECMP_REG(base, hart) ((ulong)(base) + 0x4000 + (hart) * 8)
+/* Timer register */
+#define MTIME_REG(base) ((ulong)(base) + 0xbff8)
+
+static void __iomem *clint_base;
+
+/*
+ * The following 3 APIs are used to implement Supervisor Binary Interface (SBI)
+ * as defined by the RISC-V privileged architecture spec v1.10.
+ *
+ * For performance reasons we don't want to get the CLINT register base via
+ * syscon_get_first_range() each time we enter in those functions, instead
+ * the base address was saved to a global variable during the clint driver
+ * probe phase, so that we can use it directly.
+ */
+
+void riscv_send_ipi(int hart)
+{
+ writel(1, (void __iomem *)MSIP_REG(clint_base, hart));
+}
+
+void riscv_set_timecmp(int hart, u64 cmp)
+{
+ writeq(cmp, (void __iomem *)MTIMECMP_REG(clint_base, hart));
+}
+
+u64 riscv_get_time(void)
+{
+ return readq((void __iomem *)MTIME_REG(clint_base));
+}
+
+static int clint_probe(struct udevice *dev)
+{
+ clint_base = syscon_get_first_range(RISCV_SYSCON_CLINT);
+
+ return 0;
+}
+
+static const struct udevice_id clint_ids[] = {
+ { .compatible = "riscv,clint0", .data = RISCV_SYSCON_CLINT },
+ { }
+};
+
+U_BOOT_DRIVER(riscv_clint) = {
+ .name = "riscv_clint",
+ .id = UCLASS_SYSCON,
+ .of_match = clint_ids,
+ .probe = clint_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};
--
2.7.4
More information about the U-Boot
mailing list