[U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
jagan at amarulasolutions.com
Tue Nov 13 20:05:46 UTC 2018
On Wed 14 Nov, 2018, 1:12 AM Tom Rini <trini at konsulko.com wrote:
> On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:
>
> > Hi Tom,
> >
> > Please pull this PR.
> >
> > thanks,
> > Jagan.
> >
> > The following changes since commit
> 454cf76184c65426b68033a23da086e73663f2fc:
> >
> > Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
> >
> > are available in the Git repository at:
> >
> > git://git.denx.de/u-boot-sunxi.git master
> >
> > for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
> >
> > sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> (2018-11-13 22:17:06 +0530)
> >
> > ----------------------------------------------------------------
> > Andre Przywara (4):
> > sunxi: A64: Update .dts/.dtsi files
> > sunxi: A64: Re-add syscon to DT node
> > sunxi: H3/H5: Update .dts files
> > sunxi: A64: Add Pine64-LTS board
> >
> > Icenowy Zheng (1):
> > sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> >
> > Jagan Teki (2):
> > arm64: allwinner: h6: Add common orangepi nodes into dtsi
> > board: allwinner: sun50i-h6: Add Orangepi Lite2 support
> >
> > Jun Nie (1):
> > sunxi: add support for Banana Pi M2 Zero board
> >
> > Marek Vasut (1):
> > sunxi: Imply fitImage support
> >
> > Vasily Khoruzhick (4):
> > mmc: sunxi: add support for automatic delay calibration
> > dm: video: bridge: don't fail to activate bridge if reset or sleep
> GPIO is missing
> > sun50i: A64: add support for R_I2C controller
> > sunxi: DT: add support for Pinebook
> >
> > arch/arm/Kconfig | 1 +
> > arch/arm/dts/Makefile | 3 +
> > arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 ++++++++++++-
> > arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
> > arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 ++++++-
> > arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++++-
> > arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 +++++++++++++-
> > arch/arm/dts/sun50i-a64-pine64-lts.dts | 13 +
> > arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
> > arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
> > arch/arm/dts/sun50i-a64-pinebook.dts | 294
> ++++++++++++++++++++++
> > arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
> > arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
> > arch/arm/dts/sun50i-a64.dtsi | 312
> ++++++++++++++++++++++--
> > arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 12 +
> > arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 2 -
> > arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 11 +
> > arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 140 +----------
> > arch/arm/dts/sun50i-h6-orangepi.dtsi | 150 ++++++++++++
> > arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
> > arch/arm/dts/sun8i-h3.dtsi | 31 +++
> > arch/arm/dts/sunxi-h3-h5.dtsi | 2 -
> > arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> > arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
> > arch/arm/mach-sunxi/Kconfig | 1 +
> > arch/arm/mach-sunxi/clock_sun6i.c | 4 +
> > board/sunxi/MAINTAINERS | 10 +
> > board/sunxi/board.c | 6 +
> > configs/bananapi_m2_zero_defconfig | 13 +
> > configs/orangepi_lite2_defconfig | 12 +
> > configs/pine64-lts_defconfig | 19 ++
> > configs/pinebook_defconfig | 22 ++
> > drivers/mmc/sunxi_mmc.c | 21 +-
> > drivers/video/bridge/video-bridge-uclass.c | 16 +-
> > drivers/video/sunxi/lcdc.c | 22 +-
> > 35 files changed, 1710 insertions(+), 202 deletions(-)
> > create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
> > create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> > create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
> > create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
> > create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
> > create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> > create mode 100644 configs/bananapi_m2_zero_defconfig
> > create mode 100644 configs/orangepi_lite2_defconfig
> > create mode 100644 configs/pine64-lts_defconfig
> > create mode 100644 configs/pinebook_defconfig
>
> This seems to be somewhat the opposite of the SPI PR in that it's not
> just fixing up a few corner cases and so forth, so I assume you intend
> me to pull this after the release.
>
Correct.
More information about the U-Boot
mailing list