[U-Boot] [PATCH 4/5] ARM: dts: rmobile: Enable HS400 on Salvator-X, ULCB, Ebisu

[Marek Vasut]

Enable the HS400 support in DT on H3, M3W, M3N Salvator-X(S)
and ULCB boards as well as E3 Ebisu board.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
 arch/arm/dts/r8a77990-ebisu.dts   | 5 +++--
 arch/arm/dts/salvator-common.dtsi | 1 +
 arch/arm/dts/ulcb.dtsi            | 1 +
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/r8a77990-ebisu.dts b/arch/arm/dts/r8a77990-ebisu.dts
index 6fcf0013b9..edd020cec1 100644
--- a/arch/arm/dts/r8a77990-ebisu.dts
+++ b/arch/arm/dts/r8a77990-ebisu.dts
@@ -167,13 +167,13 @@
 	};
 
 	sdhi3_pins: sd2 {
-		groups = "sdhi3_data8", "sdhi3_ctrl";
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
 		function = "sdhi3";
 		power-source = <1800>;
 	};
 
 	sdhi3_pins_uhs: sd2_uhs {
-		groups = "sdhi3_data8", "sdhi3_ctrl";
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
 		function = "sdhi3";
 		power-source = <1800>;
 	};
@@ -238,6 +238,7 @@
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
 	non-removable;
 	status = "okay";
 };
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index d2d667bb01..e54f28ad0b 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -642,6 +642,7 @@
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
 	non-removable;
 	fixed-emmc-driver-type = <1>;
 	status = "okay";
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index 44dd84179f..4ad22adeca 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -419,6 +419,7 @@
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
 	non-removable;
 	status = "okay";
 	max-frequency = <200000000>;
-- 
2.18.0