[U-Boot] [PATCH v13 3/4] efi: Create a function to set up for running EFI code
Simon Glass
sjg at chromium.org
Wed Nov 14 06:50:42 UTC 2018
There is still duplicated code in efi_loader for tests and normal
operation.
Add a new bootefi_run_prepare() function which holds common code used to
set up U-Boot to run EFI code. Make use of this from the existing
bootefi_test_prepare() function, as well as do_bootefi_exec().
Also shorten a few variable names.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v13: None
Changes in v12: None
Changes in v11: None
Changes in v9: None
Changes in v7: None
Changes in v5:
- Drop call to efi_init_obj_list() which is now done in do_bootefi()
- Introduce load_options_path to specifyc U-Boot env var for load_options_path
Changes in v4:
- Rebase to master
Changes in v3:
- Add patch to create a function to set up for running EFI code
cmd/bootefi.c | 85 +++++++++++++++++++++++++++++----------------------
1 file changed, 48 insertions(+), 37 deletions(-)
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index 91e6046cf5f..492052d827a 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -325,6 +325,30 @@ static efi_status_t efi_install_fdt(ulong fdt_addr)
return ret;
}
+static efi_status_t bootefi_run_prepare(const char *load_options_path,
+ struct efi_device_path *device_path,
+ struct efi_device_path *image_path,
+ struct efi_loaded_image **imagep,
+ struct efi_loaded_image_obj **objp)
+{
+ efi_status_t ret;
+
+ ret = efi_setup_loaded_image(device_path, image_path, objp, imagep);
+ if (ret != EFI_SUCCESS)
+ return ret;
+
+ /*
+ * gd lives in a fixed register which may get clobbered while we execute
+ * the payload. So save it here and restore it on every callback entry
+ */
+ efi_save_gd();
+
+ /* Transfer environment variable as load options */
+ set_load_options(*imagep, load_options_path);
+
+ return 0;
+}
+
/**
* do_bootefi_exec() - execute EFI binary
*
@@ -343,8 +367,8 @@ static efi_status_t do_bootefi_exec(void *efi,
efi_handle_t mem_handle = NULL;
struct efi_device_path *memdp = NULL;
efi_status_t ret;
- struct efi_loaded_image_obj *image_obj = NULL;
- struct efi_loaded_image *loaded_image_info = NULL;
+ struct efi_loaded_image_obj *obj = NULL;
+ struct efi_loaded_image *image_prot = NULL;
EFIAPI efi_status_t (*entry)(efi_handle_t image_handle,
struct efi_system_table *st);
@@ -374,15 +398,13 @@ static efi_status_t do_bootefi_exec(void *efi,
assert(device_path && image_path);
}
- ret = efi_setup_loaded_image(device_path, image_path, &image_obj,
- &loaded_image_info);
- if (ret != EFI_SUCCESS)
- goto exit;
+ ret = bootefi_run_prepare("bootargs", device_path, image_path,
+ &image_prot, &obj);
+ if (ret)
+ return ret;
- /* Transfer environment variable bootargs as load options */
- set_load_options(loaded_image_info, "bootargs");
/* Load the EFI payload */
- entry = efi_load_pe(image_obj, efi, loaded_image_info);
+ entry = efi_load_pe(obj, efi, image_prot);
if (!entry) {
ret = EFI_LOAD_ERROR;
goto exit;
@@ -390,10 +412,9 @@ static efi_status_t do_bootefi_exec(void *efi,
if (memdp) {
struct efi_device_path_memory *mdp = (void *)memdp;
- mdp->memory_type = loaded_image_info->image_code_type;
- mdp->start_address = (uintptr_t)loaded_image_info->image_base;
- mdp->end_address = mdp->start_address +
- loaded_image_info->image_size;
+ mdp->memory_type = image_prot->image_code_type;
+ mdp->start_address = (uintptr_t)image_prot->image_base;
+ mdp->end_address = mdp->start_address + image_prot->image_size;
}
/* we don't support much: */
@@ -403,8 +424,8 @@ static efi_status_t do_bootefi_exec(void *efi,
/* Call our payload! */
debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry);
- if (setjmp(&image_obj->exit_jmp)) {
- ret = image_obj->exit_status;
+ if (setjmp(&obj->exit_jmp)) {
+ ret = obj->exit_status;
goto exit;
}
@@ -416,7 +437,7 @@ static efi_status_t do_bootefi_exec(void *efi,
/* Move into EL2 and keep running there */
armv8_switch_to_el2((ulong)entry,
- (ulong)&image_obj->header,
+ (ulong)&obj->header,
(ulong)&systab, 0, (ulong)efi_run_in_el2,
ES_TO_AARCH64);
@@ -433,7 +454,7 @@ static efi_status_t do_bootefi_exec(void *efi,
secure_ram_addr(_do_nonsec_entry)(
efi_run_in_hyp,
(uintptr_t)entry,
- (uintptr_t)&image_obj->header,
+ (uintptr_t)&obj->header,
(uintptr_t)&systab);
/* Should never reach here, efi exits with longjmp */
@@ -441,12 +462,12 @@ static efi_status_t do_bootefi_exec(void *efi,
}
#endif
- ret = efi_do_enter(&image_obj->header, &systab, entry);
+ ret = efi_do_enter(&obj->header, &systab, entry);
exit:
/* image has returned, loaded-image obj goes *poof*: */
- if (image_obj)
- efi_delete_handle(&image_obj->header);
+ if (obj)
+ efi_delete_handle(&obj->header);
if (mem_handle)
efi_delete_handle(mem_handle);
@@ -467,33 +488,22 @@ exit:
* @path: File path to the test being run (often just the test name with a
* backslash before it
* @test_func: Address of the test function that is being run
+ * @load_options_path: U-Boot environment variable to use as load options
* @return 0 if OK, -ve on error
*/
static efi_status_t bootefi_test_prepare(struct efi_loaded_image **imagep,
struct efi_loaded_image_obj **objp,
- const char *path, ulong test_func)
+ const char *path, ulong test_func,
+ const char *load_options_path)
{
- efi_status_t r;
-
/* Construct a dummy device path */
bootefi_device_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE,
(uintptr_t)test_func,
(uintptr_t)test_func);
bootefi_image_path = efi_dp_from_file(NULL, 0, path);
- r = efi_setup_loaded_image(bootefi_device_path, bootefi_image_path,
- objp, imagep);
- if (r)
- return r;
- /*
- * gd lives in a fixed register which may get clobbered while we execute
- * the payload. So save it here and restore it on every callback entry
- */
- efi_save_gd();
-
- /* Transfer environment variable efi_selftest as load options */
- set_load_options(*imagep, "efi_selftest");
- return 0;
+ return bootefi_run_prepare(load_options_path, bootefi_device_path,
+ bootefi_image_path, imagep, objp);
}
/**
@@ -587,7 +597,8 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
struct efi_loaded_image_obj *obj;
if (bootefi_test_prepare(&image_prot, &obj, "\\selftest",
- (uintptr_t)&efi_selftest))
+ (uintptr_t)&efi_selftest,
+ "efi_selftest"))
return CMD_RET_FAILURE;
/* Execute the test */
--
2.19.1.930.g4563a0d9d0-goog
More information about the U-Boot
mailing list