[U-Boot] [PATCH v4 4/4] pinctrl: stm32: make pinctrl use hwspinlock
Benjamin Gaignard
benjamin.gaignard at linaro.org
Fri Nov 16 14:00:39 UTC 2018
From: Benjamin Gaignard <benjamin.gaignard at linaro.org>
Protect configuration registers with a hardware spinlock.
If a hwspinlock is defined in the device-tree node used it
to be sure that none of the others processors on the SoC could
change the configuration at the same time.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard at st.com>
---
arch/arm/dts/stm32mp157c-ed1.dts | 4 ++++
drivers/pinctrl/pinctrl_stm32.c | 27 +++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index fc277dd7d2..7a9b742d36 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -369,6 +369,10 @@
status = "okay";
};
+&pinctrl {
+ hwlocks = <&hwspinlock 0>;
+};
+
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
vdda1v1-supply = <®11>;
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index 31285cdd57..402b7803fc 100644
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -1,6 +1,7 @@
#include <common.h>
#include <dm.h>
#include <dm/pinctrl.h>
+#include <hwspinlock.h>
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
#include <asm/io.h>
@@ -19,12 +20,20 @@ static int stm32_gpio_config(struct gpio_desc *desc,
{
struct stm32_gpio_priv *priv = dev_get_priv(desc->dev);
struct stm32_gpio_regs *regs = priv->regs;
+ struct hwspinlock *hws = dev_get_priv(dev_get_parent(desc->dev));
u32 index;
+ int ret;
if (!ctl || ctl->af > 15 || ctl->mode > 3 || ctl->otype > 1 ||
ctl->pupd > 2 || ctl->speed > 3)
return -EINVAL;
+ ret = hwspinlock_lock_timeout(hws, 1);
+ if (ret == -ETIME) {
+ dev_err(desc->dev, "HWSpinlock timeout\n");
+ return ret;
+ }
+
index = (desc->offset & 0x07) * 4;
clrsetbits_le32(®s->afr[desc->offset >> 3], AFR_MASK << index,
ctl->af << index);
@@ -39,6 +48,8 @@ static int stm32_gpio_config(struct gpio_desc *desc,
index = desc->offset;
clrsetbits_le32(®s->otyper, OTYPE_MSK << index, ctl->otype << index);
+ hwspinlock_unlock(hws);
+
return 0;
}
@@ -176,6 +187,20 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev,
}
#endif /* PINCTRL_FULL */
+static int stm32_pinctrl_probe(struct udevice *dev)
+{
+ struct hwspinlock *hws = dev_get_priv(dev);
+ int err;
+
+ /* hwspinlock property is optional, just log the error */
+ err = hwspinlock_get_by_index(dev, 0, hws);
+ if (err)
+ debug("%s: hwspinlock_get_by_index may have failed (%d)\n",
+ __func__, err);
+
+ return 0;
+}
+
static struct pinctrl_ops stm32_pinctrl_ops = {
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
.set_state = stm32_pinctrl_set_state,
@@ -200,4 +225,6 @@ U_BOOT_DRIVER(pinctrl_stm32) = {
.of_match = stm32_pinctrl_ids,
.ops = &stm32_pinctrl_ops,
.bind = dm_scan_fdt_dev,
+ .probe = stm32_pinctrl_probe,
+ .priv_auto_alloc_size = sizeof(struct hwspinlock),
};
--
2.15.0
More information about the U-Boot
mailing list