[U-Boot] [PATCH v1 0/6] Add support for DM_USB and DM_USB_DEV to TI's K2G platforms
Jean-Jacques Hiblot
jjhiblot at ti.com
Fri Nov 16 15:36:36 UTC 2018
I forgot to mention that this series applies on top of the series
"[PATCH v7 00/11] [RESEND] Add support for DM_USB and DM_USB_DEV for
TI's DRA7 EVMs and AM57 EVMs platforms."
On 16/11/2018 16:33, Jean-Jacques Hiblot wrote:
> The K2G platforms can use the generic DWC3 driver instead of relying on the
> keystone-xhci driver.
> Benefits are:
> - moving toward DM
> - brings USB gadget for free
> - allows us to remove some code
>
> Tested on:
> - K2G EVM
>
>
>
> Jean-Jacques Hiblot (6):
> usb: dwc3-generic: make it compatible with "ti,keystone-dwc3"
> board: ks2_evm: Enable the USB clocks if DM_USB is used
> ARM: dts: k2g-evm: enable USB0 and USB1
> PHY: Add phy driver for the keystone USB PHY
> usb: host: replace xhci-keystone driver by the generic dwc3 driver
> configs: k2g_evm: Enable DFU on K2G EVM
>
> arch/arm/dts/keystone-k2g-evm.dts | 28 ++++
> arch/arm/dts/keystone-k2g.dtsi | 56 ++++++++
> board/ti/ks2_evm/board.c | 12 ++
> configs/k2e_evm_defconfig | 7 +
> configs/k2e_hs_evm_defconfig | 7 +
> configs/k2g_evm_defconfig | 12 ++
> configs/k2g_hs_evm_defconfig | 12 ++
> configs/k2hk_evm_defconfig | 7 +
> configs/k2hk_hs_evm_defconfig | 7 +
> configs/k2l_evm_defconfig | 7 +
> configs/k2l_hs_evm_defconfig | 7 +
> drivers/phy/Kconfig | 10 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/keystone-usb-phy.c | 109 ++++++++++++++++
> drivers/usb/dwc3/dwc3-generic.c | 1 +
> drivers/usb/host/Makefile | 1 -
> drivers/usb/host/xhci-keystone.c | 240 -----------------------------------
> include/configs/ti_armv7_keystone2.h | 17 ++-
> 18 files changed, 294 insertions(+), 247 deletions(-)
> create mode 100644 drivers/phy/keystone-usb-phy.c
> delete mode 100644 drivers/usb/host/xhci-keystone.c
>
More information about the U-Boot
mailing list